Banana Pi BPI-R4-NIC-BE14 V2.1 Wifi module

[Lorem_amicus (Michael Fischer)]

It looks like YOU are prepared

→ Very professional !

[MarkoFlow]

@KFO

Is this a 1-on-1 replacement for the original flawed BE14 V1? Does this fit in the original BPI-R4 small housing? Does it need a cooling pad attached to the bottom for cooling through the bottom plate of the housing?

It should be a direct physical replacement since the form factor remains the same. Regarding the cooling, using a thermal pad to bridge the module to the metal housing is definitely recommended; it helps significantly with heat dissipation during sustained high-load scenarios on the 6GHz band.

[Xiaomi_ax3600]

Good morning! What a pleasant surprise I had today! I just received the complete kit.

As soon as my family allows, since I’m the last one in the band, I’ll do what I promised.

Have a good day!

[oli]

looking forward for results

[adri]

I am also looking forward to see the improvements promised.

[platanopi]

BPI-R4 WiFi range

I soldered the shield clips onto the board and made hand-cut shield cans out of copper and brass to test out. [IMG_1536] [IMG_1537] Results before shielding: no pigtails, no SFP: -89 dBm SFP cages populated: 91 dBm pigtails (20 cm) and antennae connected, no SFP: -85 dBm pigtails, antennae, SFP: -89 dBm With shielding on both sides: no pigtails, no SFP: -90 dBm pigtails and antennae added: -87 dBm pigtails and antennae, SFP: -90 dBm everything put in the stock metal housing: -82 dBm The…

BPI-R4 WiFi range

I designed a 3D-printable die set for pressing EMI shield cans from (preferably, laser-cut) blanks. The model and the instructions are on MakerWorld. Some final tweaks to the DXF drawings of the blanks (included in the project). Again, adding EMI shielding to the BE14 won’t do much for mitigating the internally generated interference. Regardless, it’s a good idea when using a plastic case. The top shield can also provides a flat surface to mount a large heatsink on. [3] [7] [8]

I’m afraid hopes are pretty low… I hope I’m wrong.

[Lorem_amicus (Michael Fischer)]

Your opinion is based on an understandable impression, but I believe the underlying assumption is incorrect:

Shielding starts at the PCB level and ends with the shielding cans; it does not start with them:

The old V1.1 design was completely different from the V2.1 design. It could not have been fixed simply by adding shielding cans, as Betonmischer demonstrated.

The visible separation of the different Wi-Fi chips is only one part of the overall design.

---

To me, it looks as though Banana Pi’s business model positions its router boards as a way to promote its OEM/ODM services:

→ Their products therefore have to prove what the company is capable of.

---

For some time now, I have had the impression that considerably more effort is being put into the board designs.

Nevertheless, the actual results will show whether my impression is right or wrong.

Hope dies last!

[oli]

any news regarding results?

[T4ASICK]

I hope his family will allow him to take be14 tests)

[Xiaomi_ax3600]

Good morning, I apologize, but I haven’t been feeling well mentally for the past two weeks, and I haven’t had the tests done yet.

I hope I’m feeling better next week and I’ll do the tests, but right now I’m not mentally ready due to problems at home and my wife’s health.

Please excuse me; I’ll do them as soon as I’m feeling better. I know you’re waiting, but I really haven’t had the strength.

I’m sorry.

I hope to be able to do them soon.

Best regards

[T4ASICK]

Oh, I’m so sorry I didn’t even think the situation could be so difficult when I wrote this. Take your time; your health/family’s health and the situation at home are more important than any tests (especially the be14 tests). I hope everything gets better🙏

[Xiaomi_ax3600]

Good afternoon. Thank you for your kind words; things are going better, but until now, I didn’t even feel like writing.

I will run the tests when I can.

Thank you for the support and your understanding.

[KFO (MJZ)]

Bro Take your time , family is always first . I pray for her to be in a good health and feeling

I already placed the order for the new BPI-R4 Wifi 7 same as you for testing

[dmrbdlln (Damir Abdullin)]

I received v2.1 today and have just installed it. The new module barely fits in a low-profile case. The R4 board appears slightly bent when all the screws are fully tightened, so I had to loosen them slightly.

I also bought a larger case, but it is designed for the SFP version, while mine is the 2.5GbE model.

As for the BE14 v2.1 performance, I have not noticed any significant difference yet. Time will tell. I am currently running OpenWrt SNAPSHOT r35205-97d6719ca7.

[ivan9ef]

@dmrbdlln

significant difference yet.

Could you share your experience with previous module version? Did you had any range or performance issues?

[dmrbdlln (Damir Abdullin)]

I had the same issues with noise and low upload speeds on the previous version of the Wi-Fi module. With the new version, at least the download speed does not degrade as much as it did before.

Previously, the download speed could drop from 1200 to 800 Mbps. Now it stays more consistently around 1000–1100 Mbps.

I have updated to the latest snapshot. I am using only 2.4/5 GHz AX; 6 GHz is still not working for me.

Here is my dmesg output, in case it is useful:

# dmesg 
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd090]
[    0.000000] Linux version 6.18.41 (builder@buildhost) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 14.4.0 r35673-b9411790fc) 14.4.0, GNU ld (GNU Binutils) 2.46.1) #0 SMP Tue Aug  4 08:39:53 2026
[    0.000000] KASLR disabled due to lack of seed
[    0.000000] Machine model: Banana Pi BPI-R4 (1x SFP+, 1x 2.5GbE)
[    0.000000] OF: reserved mem: 0x0000000042ff0000..0x0000000042ffffff (64 KiB) map non-reusable ramoops@42ff0000
[    0.000000] OF: reserved mem: 0x0000000043000000..0x000000004304ffff (320 KiB) nomap non-reusable secmon@43000000
[    0.000000] OF: reserved mem: 0x0000000047cc0000..0x0000000047dbffff (1024 KiB) nomap non-reusable wmcpu-reserved@47cc0000
[    0.000000] OF: reserved mem: 0x000000004f600000..0x000000004f63ffff (256 KiB) nomap non-reusable wo-emi@4f600000
[    0.000000] OF: reserved mem: 0x000000004f640000..0x000000004f67ffff (256 KiB) nomap non-reusable wo-emi@4f640000
[    0.000000] OF: reserved mem: 0x000000004f680000..0x000000004f6bffff (256 KiB) nomap non-reusable wo-emi@4f680000
[    0.000000] OF: reserved mem: 0x000000004f700000..0x000000004fefffff (8192 KiB) nomap non-reusable wo-data@4f700000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000040000000-0x00000000ffffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x0000000042ffffff]
[    0.000000]   node   0: [mem 0x0000000043000000-0x000000004304ffff]
[    0.000000]   node   0: [mem 0x0000000043050000-0x0000000047cbffff]
[    0.000000]   node   0: [mem 0x0000000047cc0000-0x0000000047dbffff]
[    0.000000]   node   0: [mem 0x0000000047dc0000-0x000000004f5fffff]
[    0.000000]   node   0: [mem 0x000000004f600000-0x000000004f6bffff]
[    0.000000]   node   0: [mem 0x000000004f6c0000-0x000000004f6fffff]
[    0.000000]   node   0: [mem 0x000000004f700000-0x000000004fefffff]
[    0.000000]   node   0: [mem 0x000000004ff00000-0x000000023fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000023fffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.5
[    0.000000] percpu: Embedded 20 pages/cpu s43544 r8192 d30184 u81920
[    0.000000] pcpu-alloc: s43544 r8192 d30184 u81920 alloc=20*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GICv3 CPU interface
[    0.000000] CPU features: detected: Spectre-BHB
[    0.000000] CPU features: kernel page table isolation disabled by kernel configuration
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: console=ttyS0,115200n1 pci=pcie_bus_perf root=/dev/fit0 rootwait
[    0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] software IO TLB: area num 4.
[    0.000000] software IO TLB: mapped [mem 0x00000000fa7d3000-0x00000000fe7d3000] (64MB)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2097152
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 416 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: GICD_CTLR.DS=0, SCR_EL3.FIQ=0
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] arch_timer: cp15 timer running at 13.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns
[    0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns
[    0.000088] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)
[    0.000094] pid_max: default: 32768 minimum: 301
[    0.001845] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.001867] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.005362] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.005824] rcu: Hierarchical SRCU implementation.
[    0.005826] rcu: 	Max phase no-delay instances is 1000.
[    0.005925] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.006093] smp: Bringing up secondary CPUs ...
[    0.006322] Detected VIPT I-cache on CPU1
[    0.006357] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000
[    0.006377] CPU1: Booted secondary processor 0x0000000001 [0x411fd090]
[    0.006657] Detected VIPT I-cache on CPU2
[    0.006677] GICv3: CPU2: found redistributor 2 region 0:0x000000000c0c0000
[    0.006687] CPU2: Booted secondary processor 0x0000000002 [0x411fd090]
[    0.006927] Detected VIPT I-cache on CPU3
[    0.006948] GICv3: CPU3: found redistributor 3 region 0:0x000000000c0e0000
[    0.006958] CPU3: Booted secondary processor 0x0000000003 [0x411fd090]
[    0.006991] smp: Brought up 1 node, 4 CPUs
[    0.006995] SMP: Total of 4 processors activated.
[    0.006996] CPU: All CPU(s) started at EL2
[    0.006999] CPU features: detected: 32-bit EL0 Support
[    0.007001] CPU features: detected: CRC32 instructions
[    0.007029] alternatives: applying system-wide alternatives
[    0.007114] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[    0.007226] Memory: 8132408K/8388608K available (9984K kernel code, 952K rwdata, 3048K rodata, 960K init, 310K bss, 252492K reserved, 0K cma-reserved)
[    0.010613] posixtimers hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    0.010648] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[    0.010680] 28912 pages in range for non-PLT usage
[    0.010682] 520432 pages in range for PLT usage
[    0.011878] pinctrl core: initialized pinctrl subsystem
[    0.013456] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.013839] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    0.014022] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.014198] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.014493] thermal_sys: Registered thermal governor 'fair_share'
[    0.014495] thermal_sys: Registered thermal governor 'bang_bang'
[    0.014497] thermal_sys: Registered thermal governor 'step_wise'
[    0.014499] thermal_sys: Registered thermal governor 'user_space'
[    0.014543] ASID allocator initialised with 65536 entries
[    0.015297] pstore: Using crash dump compression: deflate
[    0.015303] printk: legacy console [ramoops-1] enabled
[    0.015556] pstore: Registered ramoops as persistent store backend
[    0.015561] ramoops: using 0x10000@0x42ff0000, ecc: 0
[    0.017475] /soc/interrupt-controller@c000000: Fixed dependency cycle(s) with /soc/interrupt-controller@c000000
[    0.021166] /soc/pcie@11280000: Fixed dependency cycle(s) with /soc/pcie@11280000/interrupt-controller
[    0.021277] /soc/pcie@11290000: Fixed dependency cycle(s) with /soc/pcie@11290000/interrupt-controller
[    0.021370] /soc/pcie@11300000: Fixed dependency cycle(s) with /soc/pcie@11300000/interrupt-controller
[    0.021467] /soc/pcie@11310000: Fixed dependency cycle(s) with /soc/pcie@11310000/interrupt-controller
[    0.032345] SCSI subsystem initialized
[    0.032429] libata version 3.00 loaded.
[    0.033512] clocksource: Switched to clocksource arch_sys_counter
[    0.035345] NET: Registered PF_INET protocol family
[    0.035558] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.039852] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.039895] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.039910] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.040126] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.040960] TCP: Hash tables configured (established 65536 bind 65536)
[    0.041217] MPTCP token hash table entries: 8192 (order: 6, 196608 bytes, linear)
[    0.041382] UDP hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.041533] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.041865] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.041906] PCI: CLS 0 bytes, default 64
[    0.042670] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[    0.046602] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.046609] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.048639] cryptd: max_cpu_qlen set to 1000
[    0.078267] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.079152] mtk-xsphy soc:xs-phy@11e10000: failed to get ref_clk(id-1)
[    0.079853] mtk-pcie-gen3 11280000.pcie: host bridge /soc/pcie@11280000 ranges:
[    0.079862] mtk-pcie-gen3 11290000.pcie: host bridge /soc/pcie@11290000 ranges:
[    0.079877] mtk-pcie-gen3 11290000.pcie: Parsing ranges property...
[    0.079877] mtk-pcie-gen3 11280000.pcie: Parsing ranges property...
[    0.079897] mtk-pcie-gen3 11280000.pcie:       IO 0x0020000000..0x00201fffff -> 0x0020000000
[    0.079899] mtk-pcie-gen3 11290000.pcie:       IO 0x0028000000..0x00281fffff -> 0x0028000000
[    0.079920] mtk-pcie-gen3 11290000.pcie:      MEM 0x0028200000..0x002fffffff -> 0x0028200000
[    0.079921] mtk-pcie-gen3 11280000.pcie:      MEM 0x0020200000..0x0027ffffff -> 0x0020200000
[    0.079962] /soc/pcie@11290000: Failed to get clk index: 0 ret: -517
[    0.079976] mtk-pcie-gen3 11290000.pcie: failed to get clocks
[    0.080033] mtk-pcie-gen3 11300000.pcie: host bridge /soc/pcie@11300000 ranges:
[    0.080048] mtk-pcie-gen3 11300000.pcie: Parsing ranges property...
[    0.080077] mtk-pcie-gen3 11310000.pcie: host bridge /soc/pcie@11310000 ranges:
[    0.080091] mtk-pcie-gen3 11300000.pcie:       IO 0x0030000000..0x00301fffff -> 0x0030000000
[    0.080097] mtk-pcie-gen3 11310000.pcie: Parsing ranges property...
[    0.080102] mtk-pcie-gen3 11300000.pcie:      MEM 0x0030200000..0x0037ffffff -> 0x0030200000
[    0.080109] mtk-pcie-gen3 11310000.pcie:       IO 0x0038000000..0x00381fffff -> 0x0038000000
[    0.080129] mtk-pcie-gen3 11310000.pcie:      MEM 0x0038200000..0x003fffffff -> 0x0038200000
[    0.080130] /soc/pcie@11300000: Failed to get clk index: 0 ret: -517
[    0.080140] mtk-pcie-gen3 11300000.pcie: failed to get clocks
[    0.080150] /soc/pcie@11310000: Failed to get clk index: 0 ret: -517
[    0.080160] mtk-pcie-gen3 11310000.pcie: failed to get clocks
[    0.083163] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.085177] printk: legacy console [ttyS0] disabled
[    0.105446] 11000000.serial: ttyS0 at MMIO 0x11000000 (irq = 99, base_baud = 2500000) is a ST16650V2
[    0.105483] printk: legacy console [ttyS0] enabled
[    1.175808] mtk_rng trng: registered RNG driver
[    1.175920] random: crng init done
[    1.185216] loop: module loaded
[    1.189720] spi-nand spi0.0: Winbond SPI NAND was found.
[    1.195066] spi-nand spi0.0: 256 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
[    1.203407] 2 fixed-partitions partitions found on MTD device spi0.0
[    1.209906] Creating 2 MTD partitions on "spi0.0":
[    1.214694] 0x000000000000-0x000000200000 : "bl2"
[    1.220688] 0x000000200000-0x000008000000 : "ubi"
[    1.293552] ubi0: default fastmap pool size: 50
[    1.298079] ubi0: default fastmap WL pool size: 25
[    1.302858] ubi0: attaching mtd1
[    1.707465] ubi0: scanning is finished
[    1.715286] ubi0: attached mtd1 (name "ubi", size 126 MiB)
[    1.720771] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.727640] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.734419] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.741367] ubi0: good PEBs: 1008, bad PEBs: 0, corrupted PEBs: 0
[    1.747451] ubi0: user volume: 7, internal volumes: 1, max. volumes count: 128
[    1.754662] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 0
[    1.762998] ubi0: available PEBs: 0, total reserved PEBs: 1008, PEBs reserved for bad PEB handling: 40
[    1.772298] ubi0: background thread "ubi_bgt0d" started, PID 289
[    1.772970] block ubiblock0_4: created from ubi0:4(fit)
[    1.905068] i2c_dev: i2c /dev entries driver
[    1.909799] /soc/i2c@11003000/rt5190a@64: Fixed dependency cycle(s) with /soc/i2c@11003000/rt5190a@64/regulators/buck1
[    1.921585] mtk-lvts-thermal 1100a000.lvts: golden temp=60
[    1.928509] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
[    1.943991] NET: Registered PF_INET6 protocol family
[    1.949380] Segment Routing with IPv6
[    1.953048] In-situ OAM (IOAM) with IPv6
[    1.956996] NET: Registered PF_PACKET protocol family
[    1.962051] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    1.975084] 8021q: 802.1Q VLAN Support v1.8
[    1.991463] phy phy-soc:[email protected]: type_sw - reg 0x194, index 0
[    1.999097] mtk-pcie-gen3 11280000.pcie: host bridge /soc/pcie@11280000 ranges:
[    1.999151] mtk-pcie-gen3 11290000.pcie: host bridge /soc/pcie@11290000 ranges:
[    2.004085] mtk-pcie-gen3 11300000.pcie: host bridge /soc/pcie@11300000 ranges:
[    2.004103] mtk-pcie-gen3 11300000.pcie: Parsing ranges property...
[    2.004117] mtk-pcie-gen3 11300000.pcie:       IO 0x0030000000..0x00301fffff -> 0x0030000000
[    2.004128] mtk-pcie-gen3 11300000.pcie:      MEM 0x0030200000..0x0037ffffff -> 0x0030200000
[    2.004293] mtk-pcie-gen3 11310000.pcie: host bridge /soc/pcie@11310000 ranges:
[    2.004303] mtk-pcie-gen3 11310000.pcie: Parsing ranges property...
[    2.004312] mtk-pcie-gen3 11310000.pcie:       IO 0x0038000000..0x00381fffff -> 0x0038000000
[    2.004321] mtk-pcie-gen3 11310000.pcie:      MEM 0x0038200000..0x003fffffff -> 0x0038200000
[    2.006459] mtk-pcie-gen3 11280000.pcie: Parsing ranges property...
[    2.013754] mtk-pcie-gen3 11290000.pcie: Parsing ranges property...
[    2.021053] mtk-pcie-gen3 11280000.pcie:       IO 0x0020000000..0x00201fffff -> 0x0020000000
[    2.027310] mtk-pcie-gen3 11290000.pcie:       IO 0x0028000000..0x00281fffff -> 0x0028000000
[    2.035733] mtk-pcie-gen3 11280000.pcie:      MEM 0x0020200000..0x0027ffffff -> 0x0020200000
[    2.044157] mtk-pcie-gen3 11290000.pcie:      MEM 0x0028200000..0x002fffffff -> 0x0028200000
[    2.060826] mtk-msdc 11230000.mmc: Final PAD_DS_TUNE: 0x13014
[    2.114828] mtk_soc_eth 15100000.ethernet: generated random MAC address 20:08:02:00:00:00
[    2.118534] mtk-pcie-gen3 11300000.pcie: set IO trans window[0]: cpu_addr = 0x30000000, pci_addr = 0x30000000, size = 0x200000
[    2.118541] mtk-pcie-gen3 11300000.pcie: set MEM trans window[1]: cpu_addr = 0x30200000, pci_addr = 0x30200000, size = 0x200000
[    2.118546] mtk-pcie-gen3 11300000.pcie: set MEM trans window[2]: cpu_addr = 0x30400000, pci_addr = 0x30400000, size = 0x400000
[    2.118550] mtk-pcie-gen3 11300000.pcie: set MEM trans window[3]: cpu_addr = 0x30800000, pci_addr = 0x30800000, size = 0x800000
[    2.118555] mtk-pcie-gen3 11300000.pcie: set MEM trans window[4]: cpu_addr = 0x31000000, pci_addr = 0x31000000, size = 0x1000000
[    2.118559] mtk-pcie-gen3 11300000.pcie: set MEM trans window[5]: cpu_addr = 0x32000000, pci_addr = 0x32000000, size = 0x2000000
[    2.118563] mtk-pcie-gen3 11300000.pcie: set MEM trans window[6]: cpu_addr = 0x34000000, pci_addr = 0x34000000, size = 0x4000000
[    2.118813] mtk-pcie-gen3 11300000.pcie: PCI host bridge to bus 0000:00
[    2.118820] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.118828] pci_bus 0000:00: root bus resource [io  0x400000-0x5fffff] (bus address [0x30000000-0x301fffff])
[    2.118832] pci_bus 0000:00: root bus resource [mem 0x30200000-0x37ffffff]
[    2.118836] pci_bus 0000:00: scanning bus
[    2.118866] pci 0000:00:00.0: [14c3:7988] type 01 class 0x060400 PCIe Root Port
[    2.118888] pci 0000:00:00.0: BAR 0 [mem 0x00000000-0x00007fff 64bit]
[    2.118894] pci 0000:00:00.0: PCI bridge to [bus 00]
[    2.118901] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
[    2.118906] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    2.118916] pci 0000:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    2.118974] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    2.118980] pci 0000:00:00.0: PME# disabled
[    2.120085] pci_bus 0000:00: fixups for bus
[    2.120090] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 0
[    2.120094] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    2.120102] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 1
[    2.120150] pci_bus 0000:01: scanning bus
[    2.120176] pci 0000:01:00.0: [14c3:7990] type 00 class 0x028000 PCIe Endpoint
[    2.120232] pci 0000:01:00.0: BAR 0 [mem 0x00000000-0x001fffff 64bit pref]
[    2.120239] pci 0000:01:00.0: BAR 2 [mem 0x00000000-0x00007fff 64bit]
[    2.120345] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    2.120351] pci 0000:01:00.0: PME# disabled
[    2.120979] mmc0: Host Software Queue enabled
[    2.126680] mtk_soc_eth 15100000.ethernet: generated random MAC address 20:08:02:00:00:00
[    2.134722] mmc0: new HS400 MMC card at address 0001
[    2.142275] mtk-pcie-gen3 11310000.pcie: set IO trans window[0]: cpu_addr = 0x38000000, pci_addr = 0x38000000, size = 0x200000
[    2.142281] mtk-pcie-gen3 11310000.pcie: set MEM trans window[1]: cpu_addr = 0x38200000, pci_addr = 0x38200000, size = 0x200000
[    2.142286] mtk-pcie-gen3 11310000.pcie: set MEM trans window[2]: cpu_addr = 0x38400000, pci_addr = 0x38400000, size = 0x400000
[    2.142291] mtk-pcie-gen3 11310000.pcie: set MEM trans window[3]: cpu_addr = 0x38800000, pci_addr = 0x38800000, size = 0x800000
[    2.142295] mtk-pcie-gen3 11310000.pcie: set MEM trans window[4]: cpu_addr = 0x39000000, pci_addr = 0x39000000, size = 0x1000000
[    2.142299] mtk-pcie-gen3 11310000.pcie: set MEM trans window[5]: cpu_addr = 0x3a000000, pci_addr = 0x3a000000, size = 0x2000000
[    2.142303] mtk-pcie-gen3 11310000.pcie: set MEM trans window[6]: cpu_addr = 0x3c000000, pci_addr = 0x3c000000, size = 0x4000000
[    2.143540] pci 0000:01:00.0: ASPM: default states L0s L1
[    2.143559] pci_bus 0000:01: fixups for bus
[    2.143562] pci_bus 0000:01: bus scan returning with max=01
[    2.143566] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    2.143574] pci_bus 0000:00: bus scan returning with max=01
[    2.143592] pci 0000:00:00.0: bridge window [mem 0x30200000-0x303fffff 64bit pref]: assigned
[    2.143597] pci 0000:00:00.0: bridge window [mem 0x30400000-0x304fffff]: assigned
[    2.143602] pci 0000:00:00.0: BAR 0 [mem 0x30500000-0x30507fff 64bit]: assigned
[    2.143612] pci 0000:01:00.0: BAR 0 [mem 0x30200000-0x303fffff 64bit pref]: assigned
[    2.143626] pci 0000:01:00.0: BAR 2 [mem 0x30400000-0x30407fff 64bit]: assigned
[    2.143633] mtk-pcie-gen3 11310000.pcie: PCI host bridge to bus 0001:00
[    2.143638] pci_bus 0001:00: root bus resource [bus 00-ff]
[    2.143640] pci 0000:00:00.0: PCI bridge to [bus 01]
[    2.143643] pci_bus 0001:00: root bus resource [io  0x600000-0x7fffff] (bus address [0x38000000-0x381fffff])
[    2.143645] pci 0000:00:00.0:   bridge window [mem 0x30400000-0x304fffff]
[    2.143647] pci_bus 0001:00: root bus resource [mem 0x38200000-0x3fffffff]
[    2.143651] pci_bus 0001:00: scanning bus
[    2.143651] pci 0000:00:00.0:   bridge window [mem 0x30200000-0x303fffff 64bit pref]
[    2.143660] pci_bus 0000:00: resource 4 [io  0x400000-0x5fffff]
[    2.143664] pci_bus 0000:00: resource 5 [mem 0x30200000-0x37ffffff]
[    2.143667] pci_bus 0000:01: resource 1 [mem 0x30400000-0x304fffff]
[    2.143670] pci_bus 0000:01: resource 2 [mem 0x30200000-0x303fffff 64bit pref]
[    2.143674] pci 0001:00:00.0: [14c3:7988] type 01 class 0x060400 PCIe Root Port
[    2.143686] pci 0000:00:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  256
[    2.143710] pci 0001:00:00.0: BAR 0 [mem 0x00000000-0x00007fff 64bit]
[    2.143713] pci 0000:01:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  256
[    2.143716] pci 0001:00:00.0: PCI bridge to [bus 00]
[    2.143723] pci 0001:00:00.0:   bridge window [io  0x0000-0x0fff]
[    2.143728] pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    2.143737] pci 0001:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    2.143792] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[    2.143796] pci 0001:00:00.0: PME# disabled
[    2.144850] pci_bus 0001:00: fixups for bus
[    2.144854] pci 0001:00:00.0: scanning [bus 00-00] behind bridge, pass 0
[    2.144857] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    2.144864] pci 0001:00:00.0: scanning [bus 00-00] behind bridge, pass 1
[    2.144907] pci_bus 0001:01: scanning bus
[    2.144934] pci 0001:01:00.0: [14c3:7991] type 00 class 0x028000 PCIe Endpoint
[    2.144990] pci 0001:01:00.0: BAR 0 [mem 0x00000000-0x001fffff 64bit pref]
[    2.144997] pci 0001:01:00.0: BAR 2 [mem 0x00000000-0x00007fff 64bit]
[    2.145102] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[    2.145108] pci 0001:01:00.0: PME# disabled
[    2.145161] pci 0001:01:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0001:00:00.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
[    2.150945] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc082840000, irq 105
[    2.158131] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB
[    2.163600] pci 0001:01:00.0: ASPM: default states L0s L1
[    2.163628] pci_bus 0001:01: fixups for bus
[    2.163632] pci_bus 0001:01: bus scan returning with max=01
[    2.163636] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[    2.163647] pci_bus 0001:00: bus scan returning with max=01
[    2.163676] pci 0001:00:00.0: bridge window [mem 0x38200000-0x383fffff 64bit pref]: assigned
[    2.163683] pci 0001:00:00.0: bridge window [mem 0x38400000-0x384fffff]: assigned
[    2.163687] pci 0001:00:00.0: BAR 0 [mem 0x38500000-0x38507fff 64bit]: assigned
[    2.163698] pci 0001:01:00.0: BAR 0 [mem 0x38200000-0x383fffff 64bit pref]: assigned
[    2.163712] pci 0001:01:00.0: BAR 2 [mem 0x38400000-0x38407fff 64bit]: assigned
[    2.163726] pci 0001:00:00.0: PCI bridge to [bus 01]
[    2.163731] pci 0001:00:00.0:   bridge window [mem 0x38400000-0x384fffff]
[    2.163737] pci 0001:00:00.0:   bridge window [mem 0x38200000-0x383fffff 64bit pref]
[    2.163743] pci_bus 0001:00: resource 4 [io  0x600000-0x7fffff]
[    2.163747] pci_bus 0001:00: resource 5 [mem 0x38200000-0x3fffffff]
[    2.163750] pci_bus 0001:01: resource 1 [mem 0x38400000-0x384fffff]
[    2.163753] pci_bus 0001:01: resource 2 [mem 0x38200000-0x383fffff 64bit pref]
[    2.163765] pci 0001:00:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  256
[    2.163784] pci 0001:01:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  256
[    2.163813] pci 0001:00:00.0: save config 0x00: 0x798814c3
[    2.163817] pci 0001:00:00.0: save config 0x04: 0x00100000
[    2.163821] pci 0001:00:00.0: save config 0x08: 0x06040001
[    2.163824] pci 0001:00:00.0: save config 0x0c: 0x00010000
[    2.163827] pci 0001:00:00.0: save config 0x10: 0x38500004
[    2.163831] pci 0001:00:00.0: save config 0x14: 0x00000000
[    2.163834] pci 0001:00:00.0: save config 0x18: 0x00010100
[    2.163838] pci 0001:00:00.0: save config 0x1c: 0x000001f1
[    2.163841] pci 0001:00:00.0: save config 0x20: 0x38403840
[    2.163844] pci 0001:00:00.0: save config 0x24: 0x38313821
[    2.163847] pci 0001:00:00.0: save config 0x28: 0x00000000
[    2.163851] pci 0001:00:00.0: save config 0x2c: 0x00000000
[    2.163854] pci 0001:00:00.0: save config 0x30: 0x00000000
[    2.163857] pci 0001:00:00.0: save config 0x34: 0x00000080
[    2.163860] pci 0001:00:00.0: save config 0x38: 0x00000000
[    2.163863] pci 0001:00:00.0: save config 0x3c: 0x00020100
[    2.164021] pcieport 0001:00:00.0: assign IRQ: got 114
[    2.164030] pcieport 0001:00:00.0: enabling device (0000 -> 0002)
[    2.164043] pcieport 0001:00:00.0: enabling bus mastering
[    2.164416] mtk-pcie-gen3 11310000.pcie: msi#0x0 address_hi 0x0 address_lo 0x11310c00 data 0
[    2.164427] mtk-pcie-gen3 11310000.pcie: msi#0x1 address_hi 0x0 address_lo 0x11310c00 data 1
[    2.164431] mtk-pcie-gen3 11310000.pcie: msi#0x2 address_hi 0x0 address_lo 0x11310c00 data 2
[    2.164435] mtk-pcie-gen3 11310000.pcie: msi#0x3 address_hi 0x0 address_lo 0x11310c00 data 3
[    2.164439] mtk-pcie-gen3 11310000.pcie: msi#0x4 address_hi 0x0 address_lo 0x11310c00 data 4
[    2.164443] mtk-pcie-gen3 11310000.pcie: msi#0x5 address_hi 0x0 address_lo 0x11310c00 data 5
[    2.164446] mtk-pcie-gen3 11310000.pcie: msi#0x6 address_hi 0x0 address_lo 0x11310c00 data 6
[    2.164450] mtk-pcie-gen3 11310000.pcie: msi#0x7 address_hi 0x0 address_lo 0x11310c00 data 7
[    2.164453] mtk-pcie-gen3 11310000.pcie: msi#0x8 address_hi 0x0 address_lo 0x11310c00 data 8
[    2.164457] mtk-pcie-gen3 11310000.pcie: msi#0x9 address_hi 0x0 address_lo 0x11310c00 data 9
[    2.164461] mtk-pcie-gen3 11310000.pcie: msi#0xa address_hi 0x0 address_lo 0x11310c00 data 10
[    2.164465] mtk-pcie-gen3 11310000.pcie: msi#0xb address_hi 0x0 address_lo 0x11310c00 data 11
[    2.164469] mtk-pcie-gen3 11310000.pcie: msi#0xc address_hi 0x0 address_lo 0x11310c00 data 12
[    2.164472] mtk-pcie-gen3 11310000.pcie: msi#0xd address_hi 0x0 address_lo 0x11310c00 data 13
[    2.164476] mtk-pcie-gen3 11310000.pcie: msi#0xe address_hi 0x0 address_lo 0x11310c00 data 14
[    2.164480] mtk-pcie-gen3 11310000.pcie: msi#0xf address_hi 0x0 address_lo 0x11310c00 data 15
[    2.164484] mtk-pcie-gen3 11310000.pcie: msi#0x10 address_hi 0x0 address_lo 0x11310c00 data 16
[    2.164488] mtk-pcie-gen3 11310000.pcie: msi#0x11 address_hi 0x0 address_lo 0x11310c00 data 17
[    2.164492] mtk-pcie-gen3 11310000.pcie: msi#0x12 address_hi 0x0 address_lo 0x11310c00 data 18
[    2.164496] mtk-pcie-gen3 11310000.pcie: msi#0x13 address_hi 0x0 address_lo 0x11310c00 data 19
[    2.164500] mtk-pcie-gen3 11310000.pcie: msi#0x14 address_hi 0x0 address_lo 0x11310c00 data 20
[    2.164503] mtk-pcie-gen3 11310000.pcie: msi#0x15 address_hi 0x0 address_lo 0x11310c00 data 21
[    2.164507] mtk-pcie-gen3 11310000.pcie: msi#0x16 address_hi 0x0 address_lo 0x11310c00 data 22
[    2.164511] mtk-pcie-gen3 11310000.pcie: msi#0x17 address_hi 0x0 address_lo 0x11310c00 data 23
[    2.164515] mtk-pcie-gen3 11310000.pcie: msi#0x18 address_hi 0x0 address_lo 0x11310c00 data 24
[    2.164519] mtk-pcie-gen3 11310000.pcie: msi#0x19 address_hi 0x0 address_lo 0x11310c00 data 25
[    2.164523] mtk-pcie-gen3 11310000.pcie: msi#0x1a address_hi 0x0 address_lo 0x11310c00 data 26
[    2.164527] mtk-pcie-gen3 11310000.pcie: msi#0x1b address_hi 0x0 address_lo 0x11310c00 data 27
[    2.164531] mtk-pcie-gen3 11310000.pcie: msi#0x1c address_hi 0x0 address_lo 0x11310c00 data 28
[    2.164535] mtk-pcie-gen3 11310000.pcie: msi#0x1d address_hi 0x0 address_lo 0x11310c00 data 29
[    2.164538] mtk-pcie-gen3 11310000.pcie: msi#0x1e address_hi 0x0 address_lo 0x11310c00 data 30
[    2.164542] mtk-pcie-gen3 11310000.pcie: msi#0x1f address_hi 0x0 address_lo 0x11310c00 data 31
[    2.164923] mtk-pcie-gen3 11310000.pcie: msi#0x0 address_hi 0x0 address_lo 0x11310c00 data 0
[    2.165006] pcieport 0001:00:00.0: PME: Signaling with IRQ 115
[    2.165160] pcieport 0001:00:00.0: AER: enabled with IRQ 115
[    2.165211] pcieport 0001:00:00.0: bwctrl: enabled with IRQ 115
[    2.165226] pcieport 0001:00:00.0: save config 0x00: 0x798814c3
[    2.165231] pcieport 0001:00:00.0: save config 0x04: 0x00100406
[    2.165234] pcieport 0001:00:00.0: save config 0x08: 0x06040001
[    2.165238] pcieport 0001:00:00.0: save config 0x0c: 0x00010000
[    2.165242] pcieport 0001:00:00.0: save config 0x10: 0x38500004
[    2.165246] pcieport 0001:00:00.0: save config 0x14: 0x00000000
[    2.165249] pcieport 0001:00:00.0: save config 0x18: 0x00010100
[    2.165253] pcieport 0001:00:00.0: save config 0x1c: 0x000001f1
[    2.165257] pcieport 0001:00:00.0: save config 0x20: 0x38403840
[    2.165261] pcieport 0001:00:00.0: save config 0x24: 0x38313821
[    2.165265] pcieport 0001:00:00.0: save config 0x28: 0x00000000
[    2.165269] pcieport 0001:00:00.0: save config 0x2c: 0x00000000
[    2.165273] pcieport 0001:00:00.0: save config 0x30: 0x00000000
[    2.165277] pcieport 0001:00:00.0: save config 0x34: 0x00000080
[    2.165281] pcieport 0001:00:00.0: save config 0x38: 0x00000000
[    2.165284] pcieport 0001:00:00.0: save config 0x3c: 0x00020172
[    2.165337] pci 0001:01:00.0: save config 0x00: 0x799114c3
[    2.165341] pci 0001:01:00.0: save config 0x04: 0x00100000
[    2.165345] pci 0001:01:00.0: save config 0x08: 0x02800000
[    2.165349] pci 0001:01:00.0: save config 0x0c: 0x00000000
[    2.165353] pci 0001:01:00.0: save config 0x10: 0x3820000c
[    2.165357] pci 0001:01:00.0: save config 0x14: 0x00000000
[    2.165361] pci 0001:01:00.0: save config 0x18: 0x38400004
[    2.165365] pci 0001:01:00.0: save config 0x1c: 0x00000000
[    2.165369] pci 0001:01:00.0: save config 0x20: 0x00000000
[    2.165373] pci 0001:01:00.0: save config 0x24: 0x00000000
[    2.165377] pci 0001:01:00.0: save config 0x28: 0x00000000
[    2.165381] pci 0001:01:00.0: save config 0x2c: 0x663914c3
[    2.165385] pci 0001:01:00.0: save config 0x30: 0x00000000
[    2.165389] pci 0001:01:00.0: save config 0x34: 0x00000080
[    2.165392] pci 0001:01:00.0: save config 0x38: 0x00000000
[    2.165396] pci 0001:01:00.0: save config 0x3c: 0x00000100
[    2.165486] pci 0000:00:00.0: save config 0x00: 0x798814c3
[    2.165491] pci 0000:00:00.0: save config 0x04: 0x00100000
[    2.165495] pci 0000:00:00.0: save config 0x08: 0x06040001
[    2.165499] pci 0000:00:00.0: save config 0x0c: 0x00010000
[    2.165503] pci 0000:00:00.0: save config 0x10: 0x30500004
[    2.165506] pci 0000:00:00.0: save config 0x14: 0x00000000
[    2.165510] pci 0000:00:00.0: save config 0x18: 0x00010100
[    2.165513] pci 0000:00:00.0: save config 0x1c: 0x000001f1
[    2.165516] pci 0000:00:00.0: save config 0x20: 0x30403040
[    2.165519] pci 0000:00:00.0: save config 0x24: 0x30313021
[    2.165523] pci 0000:00:00.0: save config 0x28: 0x00000000
[    2.165526] pci 0000:00:00.0: save config 0x2c: 0x00000000
[    2.165529] pci 0000:00:00.0: save config 0x30: 0x00000000
[    2.165532] pci 0000:00:00.0: save config 0x34: 0x00000080
[    2.165536] pci 0000:00:00.0: save config 0x38: 0x00000000
[    2.165539] pci 0000:00:00.0: save config 0x3c: 0x00020100
[    2.165632] pcieport 0000:00:00.0: assign IRQ: got 116
[    2.165640] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
[    2.165652] pcieport 0000:00:00.0: enabling bus mastering
[    2.166007] mtk-pcie-gen3 11300000.pcie: msi#0x0 address_hi 0x0 address_lo 0x11300c00 data 0
[    2.166017] mtk-pcie-gen3 11300000.pcie: msi#0x1 address_hi 0x0 address_lo 0x11300c00 data 1
[    2.166022] mtk-pcie-gen3 11300000.pcie: msi#0x2 address_hi 0x0 address_lo 0x11300c00 data 2
[    2.166026] mtk-pcie-gen3 11300000.pcie: msi#0x3 address_hi 0x0 address_lo 0x11300c00 data 3
[    2.166030] mtk-pcie-gen3 11300000.pcie: msi#0x4 address_hi 0x0 address_lo 0x11300c00 data 4
[    2.166033] mtk-pcie-gen3 11300000.pcie: msi#0x5 address_hi 0x0 address_lo 0x11300c00 data 5
[    2.166037] mtk-pcie-gen3 11300000.pcie: msi#0x6 address_hi 0x0 address_lo 0x11300c00 data 6
[    2.166040] mtk-pcie-gen3 11300000.pcie: msi#0x7 address_hi 0x0 address_lo 0x11300c00 data 7
[    2.166044] mtk-pcie-gen3 11300000.pcie: msi#0x8 address_hi 0x0 address_lo 0x11300c00 data 8
[    2.166047] mtk-pcie-gen3 11300000.pcie: msi#0x9 address_hi 0x0 address_lo 0x11300c00 data 9
[    2.166051] mtk-pcie-gen3 11300000.pcie: msi#0xa address_hi 0x0 address_lo 0x11300c00 data 10
[    2.166055] mtk-pcie-gen3 11300000.pcie: msi#0xb address_hi 0x0 address_lo 0x11300c00 data 11
[    2.166058] mtk-pcie-gen3 11300000.pcie: msi#0xc address_hi 0x0 address_lo 0x11300c00 data 12
[    2.166062] mtk-pcie-gen3 11300000.pcie: msi#0xd address_hi 0x0 address_lo 0x11300c00 data 13
[    2.166065] mtk-pcie-gen3 11300000.pcie: msi#0xe address_hi 0x0 address_lo 0x11300c00 data 14
[    2.166069] mtk-pcie-gen3 11300000.pcie: msi#0xf address_hi 0x0 address_lo 0x11300c00 data 15
[    2.166073] mtk-pcie-gen3 11300000.pcie: msi#0x10 address_hi 0x0 address_lo 0x11300c00 data 16
[    2.166077] mtk-pcie-gen3 11300000.pcie: msi#0x11 address_hi 0x0 address_lo 0x11300c00 data 17
[    2.166081] mtk-pcie-gen3 11300000.pcie: msi#0x12 address_hi 0x0 address_lo 0x11300c00 data 18
[    2.166085] mtk-pcie-gen3 11300000.pcie: msi#0x13 address_hi 0x0 address_lo 0x11300c00 data 19
[    2.166088] mtk-pcie-gen3 11300000.pcie: msi#0x14 address_hi 0x0 address_lo 0x11300c00 data 20
[    2.166092] mtk-pcie-gen3 11300000.pcie: msi#0x15 address_hi 0x0 address_lo 0x11300c00 data 21
[    2.166096] mtk-pcie-gen3 11300000.pcie: msi#0x16 address_hi 0x0 address_lo 0x11300c00 data 22
[    2.166100] mtk-pcie-gen3 11300000.pcie: msi#0x17 address_hi 0x0 address_lo 0x11300c00 data 23
[    2.166104] mtk-pcie-gen3 11300000.pcie: msi#0x18 address_hi 0x0 address_lo 0x11300c00 data 24
[    2.166108] mtk-pcie-gen3 11300000.pcie: msi#0x19 address_hi 0x0 address_lo 0x11300c00 data 25
[    2.166112] mtk-pcie-gen3 11300000.pcie: msi#0x1a address_hi 0x0 address_lo 0x11300c00 data 26
[    2.166116] mtk-pcie-gen3 11300000.pcie: msi#0x1b address_hi 0x0 address_lo 0x11300c00 data 27
[    2.166120] mtk-pcie-gen3 11300000.pcie: msi#0x1c address_hi 0x0 address_lo 0x11300c00 data 28
[    2.166123] mtk-pcie-gen3 11300000.pcie: msi#0x1d address_hi 0x0 address_lo 0x11300c00 data 29
[    2.166127] mtk-pcie-gen3 11300000.pcie: msi#0x1e address_hi 0x0 address_lo 0x11300c00 data 30
[    2.166131] mtk-pcie-gen3 11300000.pcie: msi#0x1f address_hi 0x0 address_lo 0x11300c00 data 31
[    2.166506] mtk-pcie-gen3 11300000.pcie: msi#0x0 address_hi 0x0 address_lo 0x11300c00 data 0
[    2.166573] pcieport 0000:00:00.0: PME: Signaling with IRQ 117
[    2.166671] pcieport 0000:00:00.0: AER: enabled with IRQ 117
[    2.166720] pcieport 0000:00:00.0: bwctrl: enabled with IRQ 117
[    2.166735] pcieport 0000:00:00.0: save config 0x00: 0x798814c3
[    2.166739] pcieport 0000:00:00.0: save config 0x04: 0x00100406
[    2.166743] pcieport 0000:00:00.0: save config 0x08: 0x06040001
[    2.166746] pcieport 0000:00:00.0: save config 0x0c: 0x00010000
[    2.166750] pcieport 0000:00:00.0: save config 0x10: 0x30500004
[    2.166754] pcieport 0000:00:00.0: save config 0x14: 0x00000000
[    2.166757] pcieport 0000:00:00.0: save config 0x18: 0x00010100
[    2.166761] pcieport 0000:00:00.0: save config 0x1c: 0x000001f1
[    2.166764] pcieport 0000:00:00.0: save config 0x20: 0x30403040
[    2.166768] pcieport 0000:00:00.0: save config 0x24: 0x30313021
[    2.166772] pcieport 0000:00:00.0: save config 0x28: 0x00000000
[    2.166776] pcieport 0000:00:00.0: save config 0x2c: 0x00000000
[    2.166779] pcieport 0000:00:00.0: save config 0x30: 0x00000000
[    2.166783] pcieport 0000:00:00.0: save config 0x34: 0x00000080
[    2.166786] pcieport 0000:00:00.0: save config 0x38: 0x00000000
[    2.166790] pcieport 0000:00:00.0: save config 0x3c: 0x00020174
[    2.166845] pci 0000:01:00.0: save config 0x00: 0x799014c3
[    2.166849] pci 0000:01:00.0: save config 0x04: 0x00100000
[    2.166854] pci 0000:01:00.0: save config 0x08: 0x02800000
[    2.166858] pci 0000:01:00.0: save config 0x0c: 0x00000000
[    2.166862] pci 0000:01:00.0: save config 0x10: 0x3020000c
[    2.166867] pci 0000:01:00.0: save config 0x14: 0x00000000
[    2.166871] pci 0000:01:00.0: save config 0x18: 0x30400004
[    2.166875] pci 0000:01:00.0: save config 0x1c: 0x00000000
[    2.166879] pci 0000:01:00.0: save config 0x20: 0x00000000
[    2.166883] pci 0000:01:00.0: save config 0x24: 0x00000000
[    2.166887] pci 0000:01:00.0: save config 0x28: 0x00000000
[    2.166891] pci 0000:01:00.0: save config 0x2c: 0x663914c3
[    2.166895] pci 0000:01:00.0: save config 0x30: 0x00000000
[    2.166899] pci 0000:01:00.0: save config 0x34: 0x00000080
[    2.166903] pci 0000:01:00.0: save config 0x38: 0x00000000
[    2.166907] pci 0000:01:00.0: save config 0x3c: 0x00000100
[    2.169854] mtk_soc_eth 15100000.ethernet eth1: mediatek frame engine at 0xffffffc082840000, irq 105
[    2.181725] Alternate GPT is invalid, using primary GPT.
[    2.193004] mtk_soc_eth 15100000.ethernet eth2: mediatek frame engine at 0xffffffc082840000, irq 105
[    2.203746]  mmcblk0: p1 p2 p3 p4 p5 p128
[    2.213386] mtk-pcie-gen3 11290000.pcie: set IO trans window[0]: cpu_addr = 0x28000000, pci_addr = 0x28000000, size = 0x200000
[    2.213394] mtk-pcie-gen3 11290000.pcie: set MEM trans window[1]: cpu_addr = 0x28200000, pci_addr = 0x28200000, size = 0x200000
[    2.213400] mtk-pcie-gen3 11290000.pcie: set MEM trans window[2]: cpu_addr = 0x28400000, pci_addr = 0x28400000, size = 0x400000
[    2.213404] mtk-pcie-gen3 11290000.pcie: set MEM trans window[3]: cpu_addr = 0x28800000, pci_addr = 0x28800000, size = 0x800000
[    2.213408] mtk-pcie-gen3 11290000.pcie: set MEM trans window[4]: cpu_addr = 0x29000000, pci_addr = 0x29000000, size = 0x1000000
[    2.213412] mtk-pcie-gen3 11290000.pcie: set MEM trans window[5]: cpu_addr = 0x2a000000, pci_addr = 0x2a000000, size = 0x2000000
[    2.213416] mtk-pcie-gen3 11290000.pcie: set MEM trans window[6]: cpu_addr = 0x2c000000, pci_addr = 0x2c000000, size = 0x4000000
[    2.213585] mtk-pcie-gen3 11290000.pcie: PCI host bridge to bus 0002:00
[    2.213594] pci_bus 0002:00: root bus resource [bus 00-ff]
[    2.213601] pci_bus 0002:00: root bus resource [io  0x0000-0x1fffff] (bus address [0x28000000-0x281fffff])
[    2.213605] pci_bus 0002:00: root bus resource [mem 0x28200000-0x2fffffff]
[    2.213609] pci_bus 0002:00: scanning bus
[    2.213638] pci 0002:00:00.0: [14c3:7988] type 01 class 0x060400 PCIe Root Port
[    2.213658] pci 0002:00:00.0: BAR 0 [mem 0x00000000-0x00007fff 64bit]
[    2.213664] pci 0002:00:00.0: PCI bridge to [bus 00]
[    2.213671] pci 0002:00:00.0:   bridge window [io  0x0000-0x0fff]
[    2.213676] pci 0002:00:00.0:   bridge window [mem 0x00000000-0x000fffff]
[    2.213686] pci 0002:00:00.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
[    2.213744] pci 0002:00:00.0: PME# supported from D0 D3hot D3cold
[    2.213749] pci 0002:00:00.0: PME# disabled
[    2.214921] pci_bus 0002:00: fixups for bus
[    2.214925] pci 0002:00:00.0: scanning [bus 00-00] behind bridge, pass 0
[    2.214929] pci 0002:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    2.214936] pci 0002:00:00.0: scanning [bus 00-00] behind bridge, pass 1
[    2.214985] pci_bus 0002:01: scanning bus
[    2.215012] pci 0002:01:00.0: [1e4b:1202] type 00 class 0x010802 PCIe Endpoint
[    2.215061] pci 0002:01:00.0: BAR 0 [mem 0x00000000-0x00003fff 64bit]
[    2.215181] pci 0002:01:00.0: PME# supported from D0 D3hot D3cold
[    2.215187] pci 0002:01:00.0: PME# disabled
[    2.215234] pci 0002:01:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0002:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[    2.233568] pci 0002:01:00.0: ASPM: default states L1
[    2.237849] mmcblk0boot0: mmc0:0001 8GTF4R 4.00 MiB
[    2.244069] pci_bus 0002:01: fixups for bus
[    2.262241] mmcblk0boot1: mmc0:0001 8GTF4R 4.00 MiB
[    2.266824] pci_bus 0002:01: bus scan returning with max=01
[    2.283539] mtk-pcie-gen3 11280000.pcie: PCIe link down, current LTSSM state: detect.quiet (0x1)
[    2.287438] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01
[    2.287524] mmcblk0rpmb: mmc0:0001 8GTF4R 512 KiB, chardev (247:0)
[    2.293531] mtk-pcie-gen3 11280000.pcie: probe with driver mtk-pcie-gen3 failed with error -110
[    2.296371] mt7530-mmio 15020000.switch: configuring for fixed/internal link mode
[    2.296390] mt7530-mmio 15020000.switch: Link is Up - 10Gbps/Full - flow control rx/tx
[    2.297680] pci_bus 0002:00: bus scan returning with max=01
[    2.323353] mt7530-mmio 15020000.switch wan (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7988 PHY] (irq=120)
[    2.327230] pci 0002:00:00.0: bridge window [mem 0x28200000-0x282fffff]: assigned
[    2.362129] mt7530-mmio 15020000.switch lan1 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7988 PHY] (irq=121)
[    2.362322] pci 0002:00:00.0: BAR 0 [mem 0x28300000-0x28307fff 64bit]: assigned
[    2.398190] mt7530-mmio 15020000.switch lan2 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7988 PHY] (irq=122)
[    2.398294] pci 0002:01:00.0: BAR 0 [mem 0x28200000-0x28203fff 64bit]: assigned
[    2.437426] mt7530-mmio 15020000.switch lan3 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7988 PHY] (irq=123)
[    2.444313] pci 0002:00:00.0: PCI bridge to [bus 01]
[    2.456685] mtk_soc_eth 15100000.ethernet eth0: entered promiscuous mode
[    2.461241] pci 0002:00:00.0:   bridge window [mem 0x28200000-0x282fffff]
[    2.465428] DSA: tree 0 setup
[    2.470977] pci_bus 0002:00: resource 4 [io  0x0000-0x1fffff]
[    2.499123] FIT: Detected U-Boot 2025.10-OpenWrt-r32912-6639b15f62
[    2.506404] pci_bus 0002:00: resource 5 [mem 0x28200000-0x2fffffff]
[    2.514131] FIT: Selected configuration: "config-mt7988a-bananapi-bpi-r4-poe" (OpenWrt bananapi_bpi-r4-poe)
[    2.521423] pci_bus 0002:01: resource 1 [mem 0x28200000-0x282fffff]
[    2.528027] FIT:           kernel sub-image 0x00001000..0x00648009 "kernel-1" (ARM64 OpenWrt Linux-6.18.41) 
[    2.533516] pci 0002:00:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  256
[    2.538453] FIT:          flat_dt sub-image 0x00649000..0x00653953 "fdt-1" (ARM64 OpenWrt bananapi_bpi-r4-poe device tree blob) 
[    2.548273] pci 0002:01:00.0: Max Payload Size set to  256/ 512 (was  128), Max Read Rq  256
[    2.555035] FIT:          flat_dt sub-image 0x00654000..0x006545fd "fdt-mt7988a-bananapi-bpi-r4-emmc" (ARM64 OpenWrt bananapi_bpi-r4-poe device tree overlay mt7988a-bananapi-bpi-r4-emmc) 
[    2.561908] pci 0002:00:00.0: save config 0x00: 0x798814c3
[    2.565893] FIT:          flat_dt sub-image 0x00655000..0x0065511c "fdt-mt7988a-bananapi-bpi-r4-rtc" (ARM64 OpenWrt bananapi_bpi-r4-poe device tree overlay mt7988a-bananapi-bpi-r4-rtc) 
[    2.573627] pci 0002:00:00.0: save config 0x04: 0x00100000
[    2.579525] FIT:          flat_dt sub-image 0x00656000..0x006565b5 "fdt-mt7988a-bananapi-bpi-r4-sd" (ARM64 OpenWrt bananapi_bpi-r4-poe device tree overlay mt7988a-bananapi-bpi-r4-sd) 
[    2.585776] pci 0002:00:00.0: save config 0x08: 0x06040001
[    2.592026] FIT:          flat_dt sub-image 0x00657000..0x006590ca "fdt-mt7988a-bananapi-bpi-r4-wifi-be14" (ARM64 OpenWrt bananapi_bpi-r4-poe device tree overlay mt7988a-bananapi-bpi-r4-wifi-be14) 
[    2.599233] pci 0002:00:00.0: save config 0x0c: 0x00010000
[    2.606523] FIT:       filesystem sub-image 0x0065a000..0x039c3fff "rootfs-1" (ARM64 OpenWrt bananapi_bpi-r4-poe rootfs) 
[    2.614950] pci 0002:00:00.0: save config 0x10: 0x28300004
[    2.621618] block mmcblk0p5: mapped 1 uImage.FIT filesystem sub-image as /dev/fit0
[    2.629792] pci 0002:00:00.0: save config 0x14: 0x00000000
[    2.634913] block mmcblk0p5: mapped remaining space as /dev/fitrw
[    2.640822] pci 0002:00:00.0: save config 0x18: 0x00010100
[    2.647727] clk: Disabling unused clocks
[    2.655330] pci 0002:00:00.0: save config 0x1c: 0x000001f1
[    2.661807] PM: genpd: Disabling unused power domains
[    2.665581] pci 0002:00:00.0: save config 0x20: 0x28202820
[    4.693459] pci 0002:00:00.0: save config 0x24: 0x0001fff1
[    4.698937] pci 0002:00:00.0: save config 0x28: 0x00000000
[    4.704415] pci 0002:00:00.0: save config 0x2c: 0x00000000
[    4.709892] pci 0002:00:00.0: save config 0x30: 0x00000000
[    4.715374] pci 0002:00:00.0: save config 0x34: 0x00000080
[    4.715381] check access for rdinit=/init failed: -2, ignoring
[    4.720846] pci 0002:00:00.0: save config 0x38: 0x00000000
[    4.732139] pci 0002:00:00.0: save config 0x3c: 0x00020100
[    4.737753] pcieport 0002:00:00.0: assign IRQ: got 124
[    4.742888] pcieport 0002:00:00.0: enabling device (0000 -> 0002)
[    4.748983] pcieport 0002:00:00.0: enabling bus mastering
[    4.754730] mtk-pcie-gen3 11290000.pcie: msi#0x0 address_hi 0x0 address_lo 0x11290c00 data 0
[    4.763162] mtk-pcie-gen3 11290000.pcie: msi#0x1 address_hi 0x0 address_lo 0x11290c00 data 1
[    4.771592] mtk-pcie-gen3 11290000.pcie: msi#0x2 address_hi 0x0 address_lo 0x11290c00 data 2
[    4.780019] mtk-pcie-gen3 11290000.pcie: msi#0x3 address_hi 0x0 address_lo 0x11290c00 data 3
[    4.788445] mtk-pcie-gen3 11290000.pcie: msi#0x4 address_hi 0x0 address_lo 0x11290c00 data 4
[    4.796870] mtk-pcie-gen3 11290000.pcie: msi#0x5 address_hi 0x0 address_lo 0x11290c00 data 5
[    4.805296] mtk-pcie-gen3 11290000.pcie: msi#0x6 address_hi 0x0 address_lo 0x11290c00 data 6
[    4.813722] mtk-pcie-gen3 11290000.pcie: msi#0x7 address_hi 0x0 address_lo 0x11290c00 data 7
[    4.822146] mtk-pcie-gen3 11290000.pcie: msi#0x8 address_hi 0x0 address_lo 0x11290c00 data 8
[    4.830572] mtk-pcie-gen3 11290000.pcie: msi#0x9 address_hi 0x0 address_lo 0x11290c00 data 9
[    4.838998] mtk-pcie-gen3 11290000.pcie: msi#0xa address_hi 0x0 address_lo 0x11290c00 data 10
[    4.847510] mtk-pcie-gen3 11290000.pcie: msi#0xb address_hi 0x0 address_lo 0x11290c00 data 11
[    4.856023] mtk-pcie-gen3 11290000.pcie: msi#0xc address_hi 0x0 address_lo 0x11290c00 data 12
[    4.864535] mtk-pcie-gen3 11290000.pcie: msi#0xd address_hi 0x0 address_lo 0x11290c00 data 13
[    4.873045] mtk-pcie-gen3 11290000.pcie: msi#0xe address_hi 0x0 address_lo 0x11290c00 data 14
[    4.881559] mtk-pcie-gen3 11290000.pcie: msi#0xf address_hi 0x0 address_lo 0x11290c00 data 15
[    4.890071] mtk-pcie-gen3 11290000.pcie: msi#0x10 address_hi 0x0 address_lo 0x11290c00 data 16
[    4.898670] mtk-pcie-gen3 11290000.pcie: msi#0x11 address_hi 0x0 address_lo 0x11290c00 data 17
[    4.907269] mtk-pcie-gen3 11290000.pcie: msi#0x12 address_hi 0x0 address_lo 0x11290c00 data 18
[    4.915869] mtk-pcie-gen3 11290000.pcie: msi#0x13 address_hi 0x0 address_lo 0x11290c00 data 19
[    4.924468] mtk-pcie-gen3 11290000.pcie: msi#0x14 address_hi 0x0 address_lo 0x11290c00 data 20
[    4.933065] mtk-pcie-gen3 11290000.pcie: msi#0x15 address_hi 0x0 address_lo 0x11290c00 data 21
[    4.941663] mtk-pcie-gen3 11290000.pcie: msi#0x16 address_hi 0x0 address_lo 0x11290c00 data 22
[    4.950262] mtk-pcie-gen3 11290000.pcie: msi#0x17 address_hi 0x0 address_lo 0x11290c00 data 23
[    4.958861] mtk-pcie-gen3 11290000.pcie: msi#0x18 address_hi 0x0 address_lo 0x11290c00 data 24
[    4.967460] mtk-pcie-gen3 11290000.pcie: msi#0x19 address_hi 0x0 address_lo 0x11290c00 data 25
[    4.976059] mtk-pcie-gen3 11290000.pcie: msi#0x1a address_hi 0x0 address_lo 0x11290c00 data 26
[    4.984658] mtk-pcie-gen3 11290000.pcie: msi#0x1b address_hi 0x0 address_lo 0x11290c00 data 27
[    4.993255] mtk-pcie-gen3 11290000.pcie: msi#0x1c address_hi 0x0 address_lo 0x11290c00 data 28
[    5.001856] mtk-pcie-gen3 11290000.pcie: msi#0x1d address_hi 0x0 address_lo 0x11290c00 data 29
[    5.010456] mtk-pcie-gen3 11290000.pcie: msi#0x1e address_hi 0x0 address_lo 0x11290c00 data 30
[    5.019055] mtk-pcie-gen3 11290000.pcie: msi#0x1f address_hi 0x0 address_lo 0x11290c00 data 31
[    5.028024] mtk-pcie-gen3 11290000.pcie: msi#0x0 address_hi 0x0 address_lo 0x11290c00 data 0
[    5.036523] pcieport 0002:00:00.0: PME: Signaling with IRQ 125
[    5.042461] pcieport 0002:00:00.0: AER: enabled with IRQ 125
[    5.048191] pcieport 0002:00:00.0: bwctrl: enabled with IRQ 125
[    5.054120] pcieport 0002:00:00.0: save config 0x00: 0x798814c3
[    5.060030] pcieport 0002:00:00.0: save config 0x04: 0x00100406
[    5.065941] pcieport 0002:00:00.0: save config 0x08: 0x06040001
[    5.071849] pcieport 0002:00:00.0: save config 0x0c: 0x00010000
[    5.077759] pcieport 0002:00:00.0: save config 0x10: 0x28300004
[    5.083669] pcieport 0002:00:00.0: save config 0x14: 0x00000000
[    5.089577] pcieport 0002:00:00.0: save config 0x18: 0x00010100
[    5.095490] pcieport 0002:00:00.0: save config 0x1c: 0x000001f1
[    5.101398] pcieport 0002:00:00.0: save config 0x20: 0x28202820
[    5.107307] pcieport 0002:00:00.0: save config 0x24: 0x0001fff1
[    5.113215] pcieport 0002:00:00.0: save config 0x28: 0x00000000
[    5.119124] pcieport 0002:00:00.0: save config 0x2c: 0x00000000
[    5.125035] pcieport 0002:00:00.0: save config 0x30: 0x00000000
[    5.130943] pcieport 0002:00:00.0: save config 0x34: 0x00000080
[    5.136853] pcieport 0002:00:00.0: save config 0x38: 0x00000000
[    5.142761] pcieport 0002:00:00.0: save config 0x3c: 0x0002017c
[    5.148732] pci 0002:01:00.0: save config 0x00: 0x12021e4b
[    5.154211] pci 0002:01:00.0: save config 0x04: 0x00100000
[    5.159686] pci 0002:01:00.0: save config 0x08: 0x01080201
[    5.165167] pci 0002:01:00.0: save config 0x0c: 0x00000000
[    5.170641] pci 0002:01:00.0: save config 0x10: 0x28200004
[    5.176117] pci 0002:01:00.0: save config 0x14: 0x00000000
[    5.181592] pci 0002:01:00.0: save config 0x18: 0x00000000
[    5.187067] pci 0002:01:00.0: save config 0x1c: 0x00000000
[    5.192542] pci 0002:01:00.0: save config 0x20: 0x00000000
[    5.198019] pci 0002:01:00.0: save config 0x24: 0x00000000
[    5.203493] pci 0002:01:00.0: save config 0x28: 0x00000000
[    5.208969] pci 0002:01:00.0: save config 0x2c: 0x12021e4b
[    5.214448] pci 0002:01:00.0: save config 0x30: 0x00000000
[    5.219923] pci 0002:01:00.0: save config 0x34: 0x00000040
[    5.225399] pci 0002:01:00.0: save config 0x38: 0x00000000
[    5.230874] pci 0002:01:00.0: save config 0x3c: 0x000001ff
[    5.238144] VFS: Mounted root (squashfs filesystem) readonly on device 259:1.
[    5.245561] Freeing unused kernel memory: 960K
[    5.250193] Run /sbin/init as init process
[    5.254288]   with arguments:
[    5.257244]     /sbin/init
[    5.259940]   with environment:
[    5.263070]     HOME=/
[    5.265422]     TERM=linux
[    5.466103] init: Console is alive
[    5.469603] init: - watchdog -
[    5.769014] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    5.830191] MediaTek MT7988 2.5GbE PHY mdio-bus:0f: Firmware date code: 2024/10/30, version: 10.0
[    5.844155] usbcore: registered new interface driver usbfs
[    5.849665] usbcore: registered new interface driver hub
[    5.855008] usbcore: registered new device driver usb
[    5.860826] gpio_button_hotplug: loading out-of-tree module taints kernel.
[    5.871467] nvme 0002:01:00.0: assign IRQ: got 124
[    5.876407] nvme nvme0: pci function 0002:01:00.0
[    5.881107] nvme 0002:01:00.0: enabling device (0000 -> 0002)
[    5.886854] nvme 0002:01:00.0: enabling bus mastering
[    5.891982] mtk-pcie-gen3 11290000.pcie: msi#0x1 address_hi 0x0 address_lo 0x11290c00 data 1
[    5.900432] nvme 0002:01:00.0: save config 0x00: 0x12021e4b
[    5.906012] nvme 0002:01:00.0: save config 0x04: 0x00100406
[    5.911574] nvme 0002:01:00.0: save config 0x08: 0x01080201
[    5.917142] nvme 0002:01:00.0: save config 0x0c: 0x00000000
[    5.922703] nvme 0002:01:00.0: save config 0x10: 0x28200004
[    5.928270] nvme 0002:01:00.0: save config 0x14: 0x00000000
[    5.933834] nvme 0002:01:00.0: save config 0x18: 0x00000000
[    5.939395] nvme 0002:01:00.0: save config 0x1c: 0x00000000
[    5.944959] nvme 0002:01:00.0: save config 0x20: 0x00000000
[    5.950519] nvme 0002:01:00.0: save config 0x24: 0x00000000
[    5.956082] nvme 0002:01:00.0: save config 0x28: 0x00000000
[    5.961643] nvme 0002:01:00.0: save config 0x2c: 0x12021e4b
[    5.967206] nvme 0002:01:00.0: save config 0x30: 0x00000000
[    5.972767] nvme 0002:01:00.0: save config 0x34: 0x00000040
[    5.978330] nvme 0002:01:00.0: save config 0x38: 0x00000000
[    5.983893] nvme 0002:01:00.0: save config 0x3c: 0x0000017c
[    5.991729] nvme nvme0: missing or invalid SUBNQN field.
[    5.998678] hwmon hwmon1: temp1_input not attached to any thermal zone
[    6.005265] hwmon hwmon1: temp2_input not attached to any thermal zone
[    6.011801] hwmon hwmon1: temp3_input not attached to any thermal zone
[    6.019658] nvme nvme0: allocated 8 MiB host memory buffer (2 segments).
[    6.030305] mtk-pcie-gen3 11290000.pcie: msi#0x1 address_hi 0x0 address_lo 0x11290c00 data 1
[    6.038771] mtk-pcie-gen3 11290000.pcie: msi#0x2 address_hi 0x0 address_lo 0x11290c00 data 2
[    6.047224] mtk-pcie-gen3 11290000.pcie: msi#0x3 address_hi 0x0 address_lo 0x11290c00 data 3
[    6.055672] mtk-pcie-gen3 11290000.pcie: msi#0x4 address_hi 0x0 address_lo 0x11290c00 data 4
[    6.064124] mtk-pcie-gen3 11290000.pcie: msi#0x5 address_hi 0x0 address_lo 0x11290c00 data 5
[    6.077035] nvme nvme0: 4/0/0 default/read/poll queues
[    6.087384] nvme nvme0: Ignoring bogus Namespace Identifiers
[    6.099654] xhci-mtk 11200000.usb: supply vbus not found, using dummy regulator
[    6.107070] xhci-mtk 11200000.usb: supply vusb33 not found, using dummy regulator
[    6.114978] xhci-mtk 11200000.usb: xHCI Host Controller
[    6.120204] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 1
[    6.130647] xhci-mtk 11200000.usb: hcc params 0x01403f99 hci version 0x110 quirks 0x0000000000200010
[    6.139800] xhci-mtk 11200000.usb: irq 131, io mem 0x11200000
[    6.145610] xhci-mtk 11200000.usb: xHCI Host Controller
[    6.150825] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 2
[    6.158214] xhci-mtk 11200000.usb: Host supports USB 3.2 Enhanced SuperSpeed
[    6.165499] hub 1-0:1.0: USB hub found
[    6.169251] hub 1-0:1.0: 1 port detected
[    6.173327] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.181639] hub 2-0:1.0: USB hub found
[    6.185398] hub 2-0:1.0: 1 port detected
[    6.194253] usbcore: registered new interface driver usb-storage
[    6.200983] usbcore: registered new interface driver uas
[    6.206506] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    6.217877] init: - preinit -
[    6.544274] mtk_soc_eth 15100000.ethernet lan4: renamed from eth1
[    6.552950] mtk_soc_eth 15100000.ethernet sfp-wan: renamed from eth2
[    6.574566] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/internal link mode
[    6.582707] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 10Gbps/Full - flow control rx/tx
[    6.603546] usb 1-1: new high-speed USB device number 2 using xhci-mtk
[    6.756307] hub 1-1:1.0: USB hub found
[    6.760247] hub 1-1:1.0: 5 ports detected
[    6.886153] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
[    6.916087] hub 2-1:1.0: USB hub found
[    6.920011] hub 2-1:1.0: 4 ports detected
[    6.924288] mt7530-mmio 15020000.switch lan1: configuring for phy/internal link mode
[    7.433529] usb 1-1.5: new high-speed USB device number 3 using xhci-mtk
[    7.623560] usb 2-1.4: new SuperSpeed USB device number 3 using xhci-mtk
[    7.646095] scsi host0: uas
[    7.649544] scsi 0:0:0:0: Direct-Access     JMicron  Generic          1507 PQ: 0 ANSI: 6
[    8.715674] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    8.723333] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    8.728714] sd 0:0:0:0: [sda] Write Protect is off
[    8.733496] sd 0:0:0:0: [sda] Mode Sense: 53 00 00 08
[    8.738845] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.748012] xhci-mtk 11200000.usb: Transfer event 26 for unknown stream ring slot 4 ep 6
[    8.873691] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[    8.879947] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[    8.933938]  sda: sda1
[    8.936378] sd 0:0:0:0: [sda] Attached SCSI disk
[   11.162959] mount_root: loading kmods from internal overlay
[   11.176310] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[   11.184248] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[   12.457207] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[   12.464987] block: unable to load configuration (fstab: Entry not found)
[   12.471712] block: attempting to load /tmp/overlay/etc/config/fstab
[   12.478034] block: unable to load configuration (fstab: Entry not found)
[   12.484776] block: attempting to load /etc/config/fstab
[   12.492437] block: unable to load configuration (fstab: Entry not found)
[   12.499173] block: no usable configuration
[   12.505921] UBIFS (ubi0:6): Mounting in unauthenticated mode
[   12.511631] UBIFS (ubi0:6): background thread "ubifs_bgt0_6" started, PID 1165
[   12.555444] UBIFS (ubi0:6): UBIFS: mounted UBI device 0, volume 6, name "rootfs_data"
[   12.563265] UBIFS (ubi0:6): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   12.573171] UBIFS (ubi0:6): FS size: 74027008 bytes (70 MiB, 583 LEBs), max 593 LEBs, journal size 3682304 bytes (3 MiB, 29 LEBs)
[   12.584811] UBIFS (ubi0:6): reserved for root: 3496478 bytes (3414 KiB)
[   12.591413] UBIFS (ubi0:6): media format: w5/r0 (latest is w5/r0), UUID 03DC3987-5DC4-419D-BA29-3E2AACBF7911, small LPT model
[   12.603440] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[   12.613193] block: extroot: not configured
[   12.619736] UBIFS (ubi0:6): un-mount UBI device 0
[   12.624460] UBIFS (ubi0:6): background thread "ubifs_bgt0_6" stops
[   12.661344] F2FS-fs (fitrw): f2fs_recover_fsync_data: recovery fsync data, check_only: 0
[   12.669680] F2FS-fs (fitrw): Mounted with checkpoint version = 3999c50e
[   12.676925] mount_root: loading kmods from internal overlay
[   12.690162] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[   12.698881] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[   12.894924] block: attempting to load /tmp/overlay/upper/etc/config/fstab
[   12.902307] block: extroot: not configured
[   12.908773] UBIFS (ubi0:6): Mounting in unauthenticated mode
[   12.914488] UBIFS (ubi0:6): background thread "ubifs_bgt0_6" started, PID 1174
[   12.965509] UBIFS (ubi0:6): UBIFS: mounted UBI device 0, volume 6, name "rootfs_data"
[   12.973332] UBIFS (ubi0:6): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[   12.983238] UBIFS (ubi0:6): FS size: 74027008 bytes (70 MiB, 583 LEBs), max 593 LEBs, journal size 3682304 bytes (3 MiB, 29 LEBs)
[   12.994883] UBIFS (ubi0:6): reserved for root: 3496478 bytes (3414 KiB)
[   13.001485] UBIFS (ubi0:6): media format: w5/r0 (latest is w5/r0), UUID 03DC3987-5DC4-419D-BA29-3E2AACBF7911, small LPT model
[   13.013525] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[   13.023283] block: extroot: not configured
[   13.029743] UBIFS (ubi0:6): un-mount UBI device 0
[   13.034456] UBIFS (ubi0:6): background thread "ubifs_bgt0_6" stops
[   13.042620] mount_root: switching to f2fs overlay
[   13.049470] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[   13.060722] urandom-seed: Seeding with /etc/urandom.seed
[   13.095206] procd: - early -
[   13.098136] procd: - watchdog -
[   13.539920] EXT4-fs (nvme0n1): mounted filesystem 6a375cc4-1fa3-4682-aed6-70d8650a42a4 r/w with ordered data mode. Quota mode: disabled.
[   13.630661] procd: - watchdog -
[   13.634402] procd: - ubus -
[   13.695030] procd: - init -
[   14.095683] urngd: v1.0.2 started.
[   14.140812] kmodloader: loading kernel modules from /etc/modules.d/*
[   14.173031] tun: Universal TUN/TAP device driver, 1.6
[   14.182600] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[   14.193025] pca954x 1-0070: supply vdd not found, using dummy regulator
[   14.200348] i2c i2c-1: Added multiplexed i2c bus 2
[   14.205280] i2c i2c-1: Added multiplexed i2c bus 3
[   14.210123] i2c i2c-1: Added multiplexed i2c bus 4
[   14.215033] i2c i2c-1: Added multiplexed i2c bus 5
[   14.219869] pca954x 1-0070: registered 4 multiplexed busses for I2C switch pca9545
[   14.231515] fuse: init (API version 7.45)
[   14.237691] crypto-safexcel 15600000.crypto: EIP197:331(7,1,8,4)-HIA:272(2,5,5),PE:151/450(alg:7fe1fc00)/240/240/450
[   14.249094] crypto-safexcel 15600000.crypto: TRC init: 8704d,48a (32r,128h)
[   16.547302] EXT4-fs (sda1): mounted filesystem 52225b1b-467c-484e-a207-d52b038ebbe6 r/w with ordered data mode. Quota mode: disabled.
[   18.517460] at24 2-0057: supply vcc not found, using dummy regulator
[   18.524760] at24 2-0057: 256 byte 24c02 EEPROM, writable, 1 bytes/write
[   18.532272] Loading modules backported from Linux version v6.18.39-0-gf89c29685
[   18.539590] Backport generated by backports.git 614e5ed
[   18.551695] rtc-pcf8563 2-0051: low voltage detected, date/time is not reliable.
[   18.559178] rtc-pcf8563 2-0051: registered as rtc0
[   18.565181] rtc-pcf8563 2-0051: low voltage detected, date/time is not reliable.
[   18.572564] rtc-pcf8563 2-0051: hctosys: unable to read the hardware clock
[   18.581794] sfp sfp1: Host maximum power 3.0W
[   18.624739] mt7996e_hif 0001:01:00.0: assign IRQ: got 114
[   18.630155] mt7996e_hif 0001:01:00.0: enabling device (0000 -> 0002)
[   18.636813] mt7996e_hif 0001:01:00.0: enabling bus mastering
[   18.642591] mt7996e 0000:01:00.0: assign IRQ: got 116
[   18.647644] mt7996e 0000:01:00.0: enabling device (0000 -> 0002)
[   18.653735] mt7996e 0000:01:00.0: enabling bus mastering
[   18.723526] mt7996e 0000:01:00.0: attaching wed device 0 version 3
[   18.782488] platform 15010000.wed: MTK WED WO Firmware Version: ____000000, Build Time: 20230218204509
[   18.791810] platform 15010000.wed: MTK WED WO Chip ID 00 Region 2
[   18.851567] mt7996e_hif 0001:01:00.0: attaching wed device 1 version 3
[   19.217310] mt7996e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20260311120705a
[   19.217310] 
[   19.322753] mt7996e 0000:01:00.0: WM Firmware Version: ____000000, Build Time: 20260311120702
[   19.374021] mt7996e 0000:01:00.0: DSP Firmware Version: ____000000, Build Time: 20260311120415
[   19.394773] mt7996e 0000:01:00.0: WA Firmware Version: ____000000, Build Time: 20260311120618
[   20.001153] PPP generic driver version 2.4.2
[   20.006231] NET: Registered PF_PPPOX protocol family
[   20.012753] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[   20.020611] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved.
[   20.034207] kmodloader: done loading kernel modules from /etc/modules.d/*
[   23.423949] mtk_soc_eth 15100000.ethernet eth0: Link is Down
[   23.450811] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/internal link mode
[   23.459084] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 10Gbps/Full - flow control rx/tx
[   23.464323] mt7530-mmio 15020000.switch lan1: configuring for phy/internal link mode
[   23.476418] br-lan: port 1(lan1) entered blocking state
[   23.481661] br-lan: port 1(lan1) entered disabled state
[   23.487037] mt7530-mmio 15020000.switch lan1: entered allmulticast mode
[   23.493696] mtk_soc_eth 15100000.ethernet eth0: entered allmulticast mode
[   23.500907] mt7530-mmio 15020000.switch lan1: entered promiscuous mode
[   23.512843] mt7530-mmio 15020000.switch lan2: configuring for phy/internal link mode
[   23.521467] br-lan: port 2(lan2) entered blocking state
[   23.526928] br-lan: port 2(lan2) entered disabled state
[   23.532610] mt7530-mmio 15020000.switch lan2: entered allmulticast mode
[   23.539707] mt7530-mmio 15020000.switch lan2: entered promiscuous mode
[   23.549315] mt7530-mmio 15020000.switch lan3: configuring for phy/internal link mode
[   23.557722] br-lan: port 3(lan3) entered blocking state
[   23.563090] br-lan: port 3(lan3) entered disabled state
[   23.568525] mt7530-mmio 15020000.switch lan3: entered allmulticast mode
[   23.575705] mt7530-mmio 15020000.switch lan3: entered promiscuous mode
[   23.584927] mtk_soc_eth 15100000.ethernet lan4: PHY [mdio-bus:0f] driver [MediaTek MT7988 2.5GbE PHY] (irq=POLL)
[   23.595639] mtk_soc_eth 15100000.ethernet lan4: configuring for phy/internal link mode
[   23.605252] br-lan: port 4(lan4) entered blocking state
[   23.610624] br-lan: port 4(lan4) entered disabled state
[   23.615963] mtk_soc_eth 15100000.ethernet lan4: entered allmulticast mode
[   23.623271] mtk_soc_eth 15100000.ethernet lan4: entered promiscuous mode
[   23.634519] mt7530-mmio 15020000.switch wan: configuring for phy/internal link mode
[   23.643482] br-wan: port 1(wan) entered blocking state
[   23.648834] br-wan: port 1(wan) entered disabled state
[   23.654164] mt7530-mmio 15020000.switch wan: entered allmulticast mode
[   23.661095] mt7530-mmio 15020000.switch wan: entered promiscuous mode
[   23.672683] mtk_soc_eth 15100000.ethernet sfp-wan: configuring for inband/usxgmii link mode
[   23.710480] br-wan: port 2(sfp-wan) entered blocking state
[   23.716083] br-wan: port 2(sfp-wan) entered disabled state
[   23.721750] mtk_soc_eth 15100000.ethernet sfp-wan: entered allmulticast mode
[   23.729141] mtk_soc_eth 15100000.ethernet sfp-wan: entered promiscuous mode
[   35.814993] br-lan: port 5(phy0.0-ap0) entered blocking state
[   35.820763] br-lan: port 5(phy0.0-ap0) entered disabled state
[   35.826603] mt7996e 0000:01:00.0 phy0.0-ap0: entered allmulticast mode
[   35.833314] mt7996e 0000:01:00.0 phy0.0-ap0: entered promiscuous mode
[   35.839925] br-lan: port 5(phy0.0-ap0) entered blocking state
[   35.845703] br-lan: port 5(phy0.0-ap0) entered forwarding state
[   35.852525] br-lan: port 5(phy0.0-ap0) entered disabled state
[   35.957974] mt7530-mmio 15020000.switch wan: Link is Up - 1Gbps/Full - flow control off
[   36.036101] br-wan: port 1(wan) entered blocking state
[   36.041260] br-wan: port 1(wan) entered forwarding state
[   36.046778] br-lan: port 5(phy0.0-ap0) entered blocking state
[   36.052531] br-lan: port 5(phy0.0-ap0) entered forwarding state
[   36.308319] br-lan: port 6(phy0.1-ap0) entered blocking state
[   36.314176] br-lan: port 6(phy0.1-ap0) entered disabled state
[   36.320038] mt7996e 0000:01:00.0 phy0.1-ap0: entered allmulticast mode
[   36.326843] mt7996e 0000:01:00.0 phy0.1-ap0: entered promiscuous mode
[   36.359604] br-lan: port 6(phy0.1-ap0) entered blocking state
[   36.365418] br-lan: port 6(phy0.1-ap0) entered forwarding state
[   36.429414] br-lan: port 6(phy0.1-ap0) entered disabled state
[   36.906055] br-lan: port 7(veth-rnsd) entered blocking state
[   36.911754] br-lan: port 7(veth-rnsd) entered disabled state
[   36.917502] veth-rnsd: entered allmulticast mode
[   36.922391] veth-rnsd: entered promiscuous mode
[   36.930023] br-lan: port 7(veth-rnsd) entered blocking state
[   36.935737] br-lan: port 7(veth-rnsd) entered forwarding state
[   36.942593] eth0: renamed from veth3nTVTn
[   37.403995] br-lan: port 8(veth-lxmd) entered blocking state
[   37.409680] br-lan: port 8(veth-lxmd) entered disabled state
[   37.415418] veth-lxmd: entered allmulticast mode
[   37.420368] veth-lxmd: entered promiscuous mode
[   37.425801] br-lan: port 8(veth-lxmd) entered blocking state
[   37.431474] br-lan: port 8(veth-lxmd) entered forwarding state
[   37.438627] eth0: renamed from vethlfQtCl
[   37.674272] br-lan: port 9(veth-meshchatx) entered blocking state
[   37.680490] br-lan: port 9(veth-meshchatx) entered disabled state
[   37.686805] veth-meshchatx: entered allmulticast mode
[   37.692209] veth-meshchatx: entered promiscuous mode
[   37.698910] eth0: renamed from veth3Rf4Xi
[   37.703871] br-lan: port 9(veth-meshchatx) entered blocking state
[   37.709974] br-lan: port 9(veth-meshchatx) entered forwarding state
[   37.923278] br-lan: port 10(veth-thelounge) entered blocking state
[   37.929579] br-lan: port 10(veth-thelounge) entered disabled state
[   37.935828] veth-thelounge: entered allmulticast mode
[   37.941258] veth-thelounge: entered promiscuous mode
[   37.946823] br-lan: port 10(veth-thelounge) entered blocking state
[   37.953023] br-lan: port 10(veth-thelounge) entered forwarding state
[   37.960619] eth0: renamed from vethoRAQb7
[  100.801983] br-lan: port 6(phy0.1-ap0) entered blocking state
[  100.807758] br-lan: port 6(phy0.1-ap0) entered forwarding state

[ivan9ef]

Thanks for posting. Did you measure up/dwn speed to provider or with iperf3? What about usable signal range?

[dmrbdlln (Damir Abdullin)]

Some iperf3: router (down):

# iperf3 -s
-----------------------------------------------------------
Server listening on 5201 (test #1)
-----------------------------------------------------------
Accepted connection from 10.10.10.100, port 59379
[  5] local 10.10.10.1 port 5201 connected to 10.10.10.100 port 59380
[  8] local 10.10.10.1 port 5201 connected to 10.10.10.100 port 59381
[ 10] local 10.10.10.1 port 5201 connected to 10.10.10.100 port 59382
[ 12] local 10.10.10.1 port 5201 connected to 10.10.10.100 port 59383
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  6.62 MBytes  55.6 Mbits/sec                  
[  8]   0.00-1.00   sec  1.00 MBytes  8.39 Mbits/sec                  
[ 10]   0.00-1.00   sec  17.6 MBytes   148 Mbits/sec                  
[ 12]   0.00-1.00   sec  14.1 MBytes   118 Mbits/sec                  
[SUM]   0.00-1.00   sec  39.4 MBytes   330 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   1.00-2.00   sec  9.12 MBytes  76.5 Mbits/sec                  
[  8]   1.00-2.00   sec  1.62 MBytes  13.6 Mbits/sec                  
[ 10]   1.00-2.00   sec  16.2 MBytes   136 Mbits/sec                  
[ 12]   1.00-2.00   sec  13.8 MBytes   115 Mbits/sec                  
[SUM]   1.00-2.00   sec  40.8 MBytes   342 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   2.00-3.00   sec  9.62 MBytes  80.7 Mbits/sec                  
[  8]   2.00-3.00   sec  2.38 MBytes  19.9 Mbits/sec                  
[ 10]   2.00-3.00   sec  14.2 MBytes   120 Mbits/sec                  
[ 12]   2.00-3.00   sec  13.0 MBytes   109 Mbits/sec                  
[SUM]   2.00-3.00   sec  39.2 MBytes   329 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   3.00-4.00   sec  10.9 MBytes  91.2 Mbits/sec                  
[  8]   3.00-4.00   sec  2.75 MBytes  23.1 Mbits/sec                  
[ 10]   3.00-4.00   sec  15.9 MBytes   133 Mbits/sec                  
[ 12]   3.00-4.00   sec  11.5 MBytes  96.5 Mbits/sec                  
[SUM]   3.00-4.00   sec  41.0 MBytes   344 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   4.00-5.00   sec  11.4 MBytes  95.4 Mbits/sec                  
[  8]   4.00-5.00   sec  3.50 MBytes  29.4 Mbits/sec                  
[ 10]   4.00-5.00   sec  15.1 MBytes   127 Mbits/sec                  
[ 12]   4.00-5.00   sec  11.5 MBytes  96.5 Mbits/sec                  
[SUM]   4.00-5.00   sec  41.5 MBytes   348 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   5.00-6.00   sec  13.8 MBytes   115 Mbits/sec                  
[  8]   5.00-6.00   sec  4.50 MBytes  37.7 Mbits/sec                  
[ 10]   5.00-6.00   sec  16.9 MBytes   142 Mbits/sec                  
[ 12]   5.00-6.00   sec  13.5 MBytes   113 Mbits/sec                  
[SUM]   5.00-6.00   sec  48.6 MBytes   408 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   6.00-7.00   sec  9.38 MBytes  78.6 Mbits/sec                  
[  8]   6.00-7.00   sec  4.88 MBytes  40.9 Mbits/sec                  
[ 10]   6.00-7.00   sec  14.8 MBytes   124 Mbits/sec                  
[ 12]   6.00-7.00   sec  11.4 MBytes  95.4 Mbits/sec                  
[SUM]   6.00-7.00   sec  40.4 MBytes   338 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   7.00-8.00   sec  8.88 MBytes  74.5 Mbits/sec                  
[  8]   7.00-8.00   sec  5.00 MBytes  42.0 Mbits/sec                  
[ 10]   7.00-8.00   sec  15.0 MBytes   126 Mbits/sec                  
[ 12]   7.00-8.00   sec  11.0 MBytes  92.3 Mbits/sec                  
[SUM]   7.00-8.00   sec  39.9 MBytes   335 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   8.00-9.00   sec  9.62 MBytes  80.7 Mbits/sec                  
[  8]   8.00-9.00   sec  5.38 MBytes  45.1 Mbits/sec                  
[ 10]   8.00-9.00   sec  14.9 MBytes   125 Mbits/sec                  
[ 12]   8.00-9.00   sec  11.5 MBytes  96.5 Mbits/sec                  
[SUM]   8.00-9.00   sec  41.4 MBytes   347 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   9.00-10.00  sec  10.0 MBytes  83.9 Mbits/sec                  
[  8]   9.00-10.00  sec  6.12 MBytes  51.4 Mbits/sec                  
[ 10]   9.00-10.00  sec  14.9 MBytes   125 Mbits/sec                  
[ 12]   9.00-10.00  sec  12.8 MBytes   107 Mbits/sec                  
[SUM]   9.00-10.00  sec  43.8 MBytes   367 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]  10.00-10.04  sec   512 KBytes  97.4 Mbits/sec                  
[  8]  10.00-10.04  sec   128 KBytes  24.4 Mbits/sec                  
[ 10]  10.00-10.04  sec   512 KBytes  97.4 Mbits/sec                  
[ 12]  10.00-10.04  sec   512 KBytes  97.4 Mbits/sec                  
[SUM]  10.00-10.04  sec  1.62 MBytes   317 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-10.04  sec  99.8 MBytes  83.3 Mbits/sec                  receiver
[  8]   0.00-10.04  sec  37.2 MBytes  31.1 Mbits/sec                  receiver
[ 10]   0.00-10.04  sec   156 MBytes   130 Mbits/sec                  receiver
[ 12]   0.00-10.04  sec   124 MBytes   104 Mbits/sec                  receiver
[SUM]   0.00-10.04  sec   418 MBytes   349 Mbits/sec                  receiver
-----------------------------------------------------------
Server listening on 5201 (test #2)
-----------------------------------------------------------

client (macbook pro):

$ iperf3 -c 10.10.10.1 -P 4 -t 10
Connecting to host 10.10.10.1, port 5201
[  5] local 10.10.10.100 port 59380 connected to 10.10.10.1 port 5201
[  7] local 10.10.10.100 port 59381 connected to 10.10.10.1 port 5201
[  9] local 10.10.10.100 port 59382 connected to 10.10.10.1 port 5201
[ 11] local 10.10.10.100 port 59383 connected to 10.10.10.1 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  7.50 MBytes  62.7 Mbits/sec   39    485 KBytes       
[  7]   0.00-1.00   sec  1.12 MBytes  9.41 Mbits/sec   29   69.3 KBytes       
[  9]   0.00-1.00   sec  18.9 MBytes   158 Mbits/sec  112    686 KBytes       
[ 11]   0.00-1.00   sec  15.9 MBytes   133 Mbits/sec  115    759 KBytes       
[SUM]   0.00-1.00   sec  43.4 MBytes   363 Mbits/sec  295             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   1.00-2.00   sec  9.38 MBytes  78.6 Mbits/sec   29    557 KBytes       
[  7]   1.00-2.00   sec  1.75 MBytes  14.7 Mbits/sec    0   97.6 KBytes       
[  9]   1.00-2.00   sec  16.8 MBytes   141 Mbits/sec   67    840 KBytes       
[ 11]   1.00-2.00   sec  12.4 MBytes   104 Mbits/sec   47    485 KBytes       
[SUM]   1.00-2.00   sec  40.2 MBytes   338 Mbits/sec  143             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   2.00-3.00   sec  9.62 MBytes  80.7 Mbits/sec   35    576 KBytes       
[  7]   2.00-3.00   sec  2.38 MBytes  19.9 Mbits/sec    2    127 KBytes       
[  9]   2.00-3.00   sec  14.2 MBytes   120 Mbits/sec   44    870 KBytes       
[ 11]   2.00-3.00   sec  13.8 MBytes   115 Mbits/sec   53    567 KBytes       
[SUM]   2.00-3.00   sec  40.0 MBytes   336 Mbits/sec  134             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   3.00-4.01   sec  11.0 MBytes  92.1 Mbits/sec    8    615 KBytes       
[  7]   3.00-4.01   sec  2.88 MBytes  24.1 Mbits/sec    3    164 KBytes       
[  9]   3.00-4.01   sec  16.0 MBytes   134 Mbits/sec    2    895 KBytes       
[ 11]   3.00-4.01   sec  11.6 MBytes  97.3 Mbits/sec    0    595 KBytes       
[SUM]   3.00-4.01   sec  41.5 MBytes   347 Mbits/sec   13             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   4.01-5.00   sec  11.0 MBytes  92.5 Mbits/sec    8    451 KBytes       
[  7]   4.01-5.00   sec  3.62 MBytes  30.5 Mbits/sec    6    192 KBytes       
[  9]   4.01-5.00   sec  14.1 MBytes   119 Mbits/sec   26    455 KBytes       
[ 11]   4.01-5.00   sec  11.5 MBytes  96.7 Mbits/sec   12    629 KBytes       
[SUM]   4.01-5.00   sec  40.2 MBytes   338 Mbits/sec   52             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   5.00-6.00   sec  14.0 MBytes   118 Mbits/sec   33    561 KBytes       
[  7]   5.00-6.00   sec  4.50 MBytes  37.8 Mbits/sec    9    225 KBytes       
[  9]   5.00-6.00   sec  17.2 MBytes   145 Mbits/sec   67    765 KBytes       
[ 11]   5.00-6.00   sec  13.1 MBytes   110 Mbits/sec   28    520 KBytes       
[SUM]   5.00-6.00   sec  48.9 MBytes   411 Mbits/sec  137             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   6.00-7.01   sec  9.25 MBytes  77.3 Mbits/sec   12    506 KBytes       
[  7]   6.00-7.01   sec  5.00 MBytes  41.8 Mbits/sec    4    255 KBytes       
[  9]   6.00-7.01   sec  15.0 MBytes   125 Mbits/sec   28    987 KBytes       
[ 11]   6.00-7.01   sec  11.6 MBytes  97.1 Mbits/sec   10    687 KBytes       
[SUM]   6.00-7.01   sec  40.9 MBytes   341 Mbits/sec   54             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   7.01-8.00   sec  8.62 MBytes  72.6 Mbits/sec    8    532 KBytes       
[  7]   7.01-8.00   sec  4.62 MBytes  38.9 Mbits/sec   25    279 KBytes       
[  9]   7.01-8.00   sec  14.8 MBytes   124 Mbits/sec    4   1007 KBytes       
[ 11]   7.01-8.00   sec  10.6 MBytes  89.4 Mbits/sec   20    700 KBytes       
[SUM]   7.01-8.00   sec  38.6 MBytes   325 Mbits/sec   57             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   8.00-9.00   sec  9.88 MBytes  82.7 Mbits/sec    0    557 KBytes       
[  7]   8.00-9.00   sec  5.50 MBytes  46.1 Mbits/sec    2    305 KBytes       
[  9]   8.00-9.00   sec  15.4 MBytes   129 Mbits/sec   23   1.01 MBytes       
[ 11]   8.00-9.00   sec  12.0 MBytes   101 Mbits/sec   23    706 KBytes       
[SUM]   8.00-9.00   sec  42.8 MBytes   358 Mbits/sec   48             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   9.00-10.00  sec  10.0 MBytes  84.0 Mbits/sec    9    550 KBytes       
[  7]   9.00-10.00  sec  6.38 MBytes  53.5 Mbits/sec   14    342 KBytes       
[  9]   9.00-10.00  sec  14.4 MBytes   121 Mbits/sec   47    741 KBytes       
[ 11]   9.00-10.00  sec  12.9 MBytes   108 Mbits/sec   27    732 KBytes       
[SUM]   9.00-10.00  sec  43.6 MBytes   366 Mbits/sec   97             
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec   100 MBytes  84.1 Mbits/sec  181            sender
[  5]   0.00-10.04  sec  99.8 MBytes  83.3 Mbits/sec                  receiver
[  7]   0.00-10.00  sec  37.8 MBytes  31.7 Mbits/sec   94            sender
[  7]   0.00-10.04  sec  37.2 MBytes  31.1 Mbits/sec                  receiver
[  9]   0.00-10.00  sec   157 MBytes   131 Mbits/sec  420            sender
[  9]   0.00-10.04  sec   156 MBytes   130 Mbits/sec                  receiver
[ 11]   0.00-10.00  sec   125 MBytes   105 Mbits/sec  335            sender
[ 11]   0.00-10.04  sec   124 MBytes   104 Mbits/sec                  receiver
[SUM]   0.00-10.00  sec   420 MBytes   352 Mbits/sec  1030             sender
[SUM]   0.00-10.04  sec   418 MBytes   349 Mbits/sec                  receiver

iperf Done.

router (up):

# iperf3 -s
-----------------------------------------------------------
Server listening on 5201 (test #1)
-----------------------------------------------------------
Accepted connection from 10.10.10.100, port 59434
[  5] local 10.10.10.1 port 5201 connected to 10.10.10.100 port 59435
[  8] local 10.10.10.1 port 5201 connected to 10.10.10.100 port 59436
[ 10] local 10.10.10.1 port 5201 connected to 10.10.10.100 port 59437
[ 12] local 10.10.10.1 port 5201 connected to 10.10.10.100 port 59438
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  11.0 MBytes  92.2 Mbits/sec    0    313 KBytes       
[  8]   0.00-1.00   sec  10.8 MBytes  90.1 Mbits/sec    0    327 KBytes       
[ 10]   0.00-1.00   sec  45.8 MBytes   383 Mbits/sec    0   1.26 MBytes       
[ 12]   0.00-1.00   sec  47.5 MBytes   398 Mbits/sec    0   1.27 MBytes       
[SUM]   0.00-1.00   sec   115 MBytes   964 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   1.00-2.00   sec  14.9 MBytes   125 Mbits/sec    0    451 KBytes       
[  8]   1.00-2.00   sec  16.0 MBytes   134 Mbits/sec    0    454 KBytes       
[ 10]   1.00-2.00   sec  40.5 MBytes   340 Mbits/sec    0   1.41 MBytes       
[ 12]   1.00-2.00   sec  40.4 MBytes   339 Mbits/sec    0   1.40 MBytes       
[SUM]   1.00-2.00   sec   112 MBytes   937 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   2.00-3.00   sec  17.1 MBytes   144 Mbits/sec    0    737 KBytes       
[  8]   2.00-3.00   sec  17.9 MBytes   150 Mbits/sec    0    781 KBytes       
[ 10]   2.00-3.00   sec  39.6 MBytes   332 Mbits/sec    0   1.80 MBytes       
[ 12]   2.00-3.00   sec  41.0 MBytes   344 Mbits/sec    0   1.90 MBytes       
[SUM]   2.00-3.00   sec   116 MBytes   970 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   3.00-4.00   sec  17.6 MBytes   148 Mbits/sec    0    923 KBytes       
[  8]   3.00-4.00   sec  18.0 MBytes   151 Mbits/sec    0   1.00 MBytes       
[ 10]   3.00-4.00   sec  36.2 MBytes   304 Mbits/sec    0   2.13 MBytes       
[ 12]   3.00-4.00   sec  39.0 MBytes   327 Mbits/sec    0   2.35 MBytes       
[SUM]   3.00-4.00   sec   111 MBytes   930 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   4.00-5.00   sec  17.1 MBytes   144 Mbits/sec    0    923 KBytes       
[  8]   4.00-5.00   sec  19.2 MBytes   161 Mbits/sec    0   1.00 MBytes       
[ 10]   4.00-5.00   sec  35.8 MBytes   300 Mbits/sec    0   2.13 MBytes       
[ 12]   4.00-5.00   sec  38.9 MBytes   326 Mbits/sec    0   2.35 MBytes       
[SUM]   4.00-5.00   sec   111 MBytes   931 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   5.00-6.00   sec  12.2 MBytes   103 Mbits/sec    1   1.41 KBytes       
[  8]   5.00-6.00   sec  14.9 MBytes   125 Mbits/sec    1   1.41 KBytes       
[ 10]   5.00-6.00   sec  26.1 MBytes   219 Mbits/sec    1   1.41 KBytes       
[ 12]   5.00-6.00   sec  28.5 MBytes   239 Mbits/sec    1   1.41 KBytes       
[SUM]   5.00-6.00   sec  81.8 MBytes   686 Mbits/sec    4             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   6.00-7.00   sec  13.1 MBytes   110 Mbits/sec  402    691 KBytes       
[  8]   6.00-7.00   sec  13.4 MBytes   112 Mbits/sec  403    769 KBytes       
[ 10]   6.00-7.00   sec  7.25 MBytes  60.8 Mbits/sec  687    205 KBytes       
[ 12]   6.00-7.00   sec  4.38 MBytes  36.7 Mbits/sec  733    103 KBytes       
[SUM]   6.00-7.00   sec  38.1 MBytes   320 Mbits/sec  2225             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   7.00-8.00   sec  37.6 MBytes   316 Mbits/sec    0    776 KBytes       
[  8]   7.00-8.00   sec  41.5 MBytes   348 Mbits/sec    0    863 KBytes       
[ 10]   7.00-8.00   sec  12.9 MBytes   108 Mbits/sec    0    205 KBytes       
[ 12]   7.00-8.00   sec  9.75 MBytes  81.8 Mbits/sec    0    157 KBytes       
[SUM]   7.00-8.00   sec   102 MBytes   854 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   8.00-9.00   sec  33.5 MBytes   281 Mbits/sec    0    836 KBytes       
[  8]   8.00-9.00   sec  37.0 MBytes   310 Mbits/sec    0    929 KBytes       
[ 10]   8.00-9.00   sec  12.5 MBytes   105 Mbits/sec    0    206 KBytes       
[ 12]   8.00-9.00   sec  11.1 MBytes  93.3 Mbits/sec    0    197 KBytes       
[SUM]   8.00-9.00   sec  94.1 MBytes   790 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   9.00-10.00  sec  36.4 MBytes   305 Mbits/sec    0    874 KBytes       
[  8]   9.00-10.00  sec  39.9 MBytes   334 Mbits/sec    0    974 KBytes       
[ 10]   9.00-10.00  sec  11.2 MBytes  94.4 Mbits/sec    0    206 KBytes       
[ 12]   9.00-10.00  sec  11.0 MBytes  92.3 Mbits/sec    0    230 KBytes       
[SUM]   9.00-10.00  sec  98.5 MBytes   826 Mbits/sec    0             
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.01  sec   211 MBytes   177 Mbits/sec  403            sender
[  8]   0.00-10.01  sec   228 MBytes   191 Mbits/sec  404            sender
[ 10]   0.00-10.01  sec   268 MBytes   224 Mbits/sec  688            sender
[ 12]   0.00-10.01  sec   272 MBytes   228 Mbits/sec  734            sender
[SUM]   0.00-10.01  sec   979 MBytes   820 Mbits/sec  2229             sender
-----------------------------------------------------------
Server listening on 5201 (test #2)
-----------------------------------------------------------

client:

$ iperf3 -c 10.10.10.1 -P 4 -t 10 -R
Connecting to host 10.10.10.1, port 5201
Reverse mode, remote host 10.10.10.1 is sending
[  5] local 10.10.10.100 port 59435 connected to 10.10.10.1 port 5201
[  7] local 10.10.10.100 port 59436 connected to 10.10.10.1 port 5201
[  9] local 10.10.10.100 port 59437 connected to 10.10.10.1 port 5201
[ 11] local 10.10.10.100 port 59438 connected to 10.10.10.1 port 5201
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  9.25 MBytes  77.3 Mbits/sec                  
[  7]   0.00-1.00   sec  9.50 MBytes  79.3 Mbits/sec                  
[  9]   0.00-1.00   sec  43.5 MBytes   363 Mbits/sec                  
[ 11]   0.00-1.00   sec  44.5 MBytes   372 Mbits/sec                  
[SUM]   0.00-1.00   sec   107 MBytes   892 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   1.00-2.01   sec  14.8 MBytes   124 Mbits/sec                  
[  7]   1.00-2.01   sec  14.6 MBytes   123 Mbits/sec                  
[  9]   1.00-2.01   sec  40.4 MBytes   338 Mbits/sec                  
[ 11]   1.00-2.01   sec  41.0 MBytes   344 Mbits/sec                  
[SUM]   1.00-2.01   sec   111 MBytes   928 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   2.01-3.00   sec  16.2 MBytes   137 Mbits/sec                  
[  7]   2.01-3.00   sec  16.8 MBytes   141 Mbits/sec                  
[  9]   2.01-3.00   sec  38.4 MBytes   323 Mbits/sec                  
[ 11]   2.01-3.00   sec  39.5 MBytes   333 Mbits/sec                  
[SUM]   2.01-3.00   sec   111 MBytes   934 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   3.00-4.00   sec  16.8 MBytes   141 Mbits/sec                  
[  7]   3.00-4.00   sec  18.1 MBytes   152 Mbits/sec                  
[  9]   3.00-4.00   sec  37.1 MBytes   311 Mbits/sec                  
[ 11]   3.00-4.00   sec  39.4 MBytes   330 Mbits/sec                  
[SUM]   3.00-4.00   sec   111 MBytes   934 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   4.00-5.00   sec  17.5 MBytes   147 Mbits/sec                  
[  7]   4.00-5.00   sec  19.8 MBytes   166 Mbits/sec                  
[  9]   4.00-5.00   sec  35.2 MBytes   295 Mbits/sec                  
[ 11]   4.00-5.00   sec  39.2 MBytes   329 Mbits/sec                  
[SUM]   4.00-5.00   sec   112 MBytes   936 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   5.00-6.01   sec  12.9 MBytes   108 Mbits/sec                  
[  7]   5.00-6.01   sec  14.2 MBytes   119 Mbits/sec                  
[  9]   5.00-6.01   sec  26.4 MBytes   221 Mbits/sec                  
[ 11]   5.00-6.01   sec  28.6 MBytes   240 Mbits/sec                  
[SUM]   5.00-6.01   sec  82.1 MBytes   687 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   6.01-7.00   sec  12.6 MBytes   106 Mbits/sec                  
[  7]   6.01-7.00   sec  14.0 MBytes   118 Mbits/sec                  
[  9]   6.01-7.00   sec  6.62 MBytes  55.8 Mbits/sec                  
[ 11]   6.01-7.00   sec  3.88 MBytes  32.6 Mbits/sec                  
[SUM]   6.01-7.00   sec  37.1 MBytes   313 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   7.00-8.00   sec  37.5 MBytes   314 Mbits/sec                  
[  7]   7.00-8.00   sec  42.0 MBytes   352 Mbits/sec                  
[  9]   7.00-8.00   sec  13.8 MBytes   115 Mbits/sec                  
[ 11]   7.00-8.00   sec  10.0 MBytes  83.8 Mbits/sec                  
[SUM]   7.00-8.00   sec   103 MBytes   865 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   8.00-9.00   sec  33.6 MBytes   282 Mbits/sec                  
[  7]   8.00-9.00   sec  36.6 MBytes   307 Mbits/sec                  
[  9]   8.00-9.00   sec  11.9 MBytes  99.6 Mbits/sec                  
[ 11]   8.00-9.00   sec  10.9 MBytes  91.2 Mbits/sec                  
[SUM]   8.00-9.00   sec  93.0 MBytes   780 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[  5]   9.00-10.00  sec  36.5 MBytes   305 Mbits/sec                  
[  7]   9.00-10.00  sec  40.1 MBytes   336 Mbits/sec                  
[  9]   9.00-10.00  sec  11.0 MBytes  92.0 Mbits/sec                  
[ 11]   9.00-10.00  sec  11.5 MBytes  96.2 Mbits/sec                  
[SUM]   9.00-10.00  sec  99.1 MBytes   829 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.01  sec   211 MBytes   177 Mbits/sec  403            sender
[  5]   0.00-10.00  sec   208 MBytes   174 Mbits/sec                  receiver
[  7]   0.00-10.01  sec   229 MBytes   192 Mbits/sec  404            sender
[  7]   0.00-10.00  sec   226 MBytes   189 Mbits/sec                  receiver
[  9]   0.00-10.01  sec   268 MBytes   224 Mbits/sec  688            sender
[  9]   0.00-10.00  sec   264 MBytes   222 Mbits/sec                  receiver
[ 11]   0.00-10.01  sec   272 MBytes   228 Mbits/sec  734            sender
[ 11]   0.00-10.00  sec   268 MBytes   225 Mbits/sec                  receiver
[SUM]   0.00-10.01  sec   979 MBytes   820 Mbits/sec  2229             sender
[SUM]   0.00-10.00  sec   966 MBytes   810 Mbits/sec                  receiver

iperf Done.

[dmrbdlln (Damir Abdullin)]

# uname -a
Linux geak-r4 6.18.41 #0 SMP Tue Aug  4 08:39:53 2026 aarch64 GNU/Linux

# cat /etc/os-release 
NAME="OpenWrt"
VERSION="SNAPSHOT"
ID="openwrt"
ID_LIKE="lede openwrt"
PRETTY_NAME="OpenWrt SNAPSHOT"
VERSION_ID="snapshot"
HOME_URL="https://openwrt.org/"
BUG_URL="https://bugs.openwrt.org/"
SUPPORT_URL="https://forum.openwrt.org/"
FIRMWARE_URL="https://downloads.openwrt.org/"
BUILD_ID="r35673-b9411790fc"
OPENWRT_BOARD="mediatek/filogic"
OPENWRT_ARCH="aarch64_cortex-a53"
OPENWRT_TAINTS=""
OPENWRT_DEVICE_MANUFACTURER="OpenWrt"
OPENWRT_DEVICE_MANUFACTURER_URL="https://openwrt.org/"
OPENWRT_DEVICE_PRODUCT="Generic"
OPENWRT_DEVICE_REVISION="v0"
OPENWRT_RELEASE="OpenWrt SNAPSHOT r35673-b9411790fc"
OPENWRT_BUILD_DATE="1785832793"

# cat /etc/config/wireless 

config wifi-device 'radio0'
	option type 'mac80211'
	option path 'soc/11300000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0'
	option radio '0'
	option band '2g'
	option channel '11'
	option htmode 'HE20'
	option country 'US'
	option cell_density '0'

config wifi-device 'radio1'
	option type 'mac80211'
	option path 'soc/11300000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0'
	option radio '1'
	option band '5g'
	option htmode 'HE160'
	option country 'US'
	option cell_density '0'
	option channel '48'

config wifi-device 'radio2'
	option type 'mac80211'
	option path 'soc/11300000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0'
	option radio '2'
	option band '6g'
	option channel 'auto'
	option htmode 'EHT160'
	option country 'US'
	option cell_density '0'
	option disabled '1'

config wifi-iface 'default_radio2'
	option device 'radio2'
	option network 'lan'
	option mode 'ap'
	option ssid 'SSID'
	option encryption 'sae'
	option key '...'
	option sae_pwe '1'
	option disabled '1'

config wifi-iface 'wifinet2'
	option device 'radio0'
	option mode 'ap'
	option ssid 'SSID'
	option encryption 'sae'
	option network 'lan'
	option key '...'

config wifi-iface 'wifinet3'
	option device 'radio1'
	option mode 'ap'
	option ssid 'SSID'
	option encryption 'sae'
	option key '...'
	option network 'lan'
	option sae_pwe '1'

# lspci -nn
0000:00:00.0 PCI bridge [0604]: MEDIATEK Corp. MT7988 PCI Express Host Bridge [Filogic 880] [14c3:7988] (rev 01)
0000:01:00.0 Network controller [0280]: MEDIATEK Corp. MT7996 primary link PCIe Wi-Fi 7(802.11be) 320MHz Wireless Network Adapter [Filogic 680] [14c3:7990]
0001:00:00.0 PCI bridge [0604]: MEDIATEK Corp. MT7988 PCI Express Host Bridge [Filogic 880] [14c3:7988] (rev 01)
0001:01:00.0 Network controller [0280]: MEDIATEK Corp. MT7996 secondary link PCIe Wi-Fi 7(802.11be) 320MHz Wireless Network Adapter [Filogic 680] [14c3:7991]
0002:00:00.0 PCI bridge [0604]: MEDIATEK Corp. MT7988 PCI Express Host Bridge [Filogic 880] [14c3:7988] (rev 01)
0002:01:00.0 Non-Volatile memory controller [0108]: MAXIO Technology (Hangzhou) Ltd. NVMe SSD Controller MAP1202 (DRAM-less) [1e4b:1202] (rev 01)

[dmrbdlln (Damir Abdullin)]

@ivan9ef

What about usable signal range?

At around 4 meters with one thin brick wall between the AP and the client, the signal looks OK:

• RSSI: -54 dBm
• Noise: -89 dBm
• Current TX PHY rate: 1088 Mbps

# iw dev phy0.1-ap0 station dump
Station 5c:ad:ba:66:fe:fa (on phy0.1-ap0)
	authorized:	yes
	authenticated:	yes
	associated:	yes
	preamble:	short
	WMM/WME:	yes
	MFP:		yes
	TDLS peer:	no
	inactive time:	900 ms
	rx bytes:	1120
	rx packets:	5060
	tx bytes:	0
	tx packets:	2870
	tx retries:	438
	tx failed:	441
	rx drop misc:	3
	signal:  	-74 [-78, -77, -81] dBm
	signal avg:	-72 [-75, -75, -79] dBm
	tx bitrate:	1441.3 MBit/s 160MHz HE-MCS 7 HE-NSS 2 HE-GI 0 HE-DCM 0
	tx duration:	924832 us
	rx bitrate:	576.4 MBit/s 160MHz HE-MCS 3 HE-NSS 2 HE-GI 0 HE-DCM 0
	rx duration:	574877 us
	last ack signal:-70 dBm
	avg ack signal:	-70 dBm
	airtime weight: 256
	expected throughput:	1154.234Mbps
	DTIM period:	2
	beacon interval:100
	short slot time:yes
	connected time:	1225 seconds
	associated at [boottime]:	133.871s
	associated at:	1785880475105 ms
	current time:	1785881699916 ms

Station 84:2f:57:36:ba:df (on phy0.1-ap0)
	authorized:	yes
	authenticated:	yes
	associated:	yes
	preamble:	long
	WMM/WME:	yes
	MFP:		yes
	TDLS peer:	no
	inactive time:	0 ms
	rx bytes:	2150918016
	rx packets:	1579831
	tx bytes:	3267560832
	tx packets:	2850301
	tx retries:	32690
	tx failed:	35831
	rx drop misc:	7
	signal:  	-69 [-72, -73, -76] dBm
	signal avg:	-68 [-70, -72, -76] dBm
	tx bitrate:	1441.3 MBit/s 160MHz HE-MCS 7 HE-NSS 2 HE-GI 0 HE-DCM 0
	tx duration:	33944900 us
	rx bitrate:	544.4 MBit/s 160MHz HE-MCS 3 HE-NSS 2 HE-GI 1 HE-DCM 0
	rx duration:	44022393 us
	last ack signal:-68 dBm
	avg ack signal:	-67 dBm
	airtime weight: 256
	expected throughput:	1154.234Mbps
	DTIM period:	2
	beacon interval:100
	short slot time:yes
	connected time:	1200 seconds
	associated at [boottime]:	158.571s
	associated at:	1785880499806 ms
	current time:	1785881699917 ms

# iwinfo phy0.1-ap0 assoclist
5C:AD:BA:66:FE:FA  -72 dBm / -83 dBm (SNR 11)  1650 ms ago
	RX: 576.4 MBit/s, HE-MCS 3, 160MHz, HE-NSS 2, HE-GI 0, HE-DCM 0      5084 Pkts.
	TX: 1441.3 MBit/s, HE-MCS 7, 160MHz, HE-NSS 2, HE-GI 0, HE-DCM 0      2871 Pkts.
	expected throughput: 1181.9 MBit/s

84:2F:57:36:BA:DF  -68 dBm / -83 dBm (SNR 15)  70 ms ago
	RX: 576.4 MBit/s, HE-MCS 3, 160MHz, HE-NSS 2, HE-GI 0, HE-DCM 0   1580164 Pkts.
	TX: 1441.3 MBit/s, HE-MCS 7, 160MHz, HE-NSS 2, HE-GI 0, HE-DCM 0   2850593 Pkts.
	expected throughput: 1181.9 MBit/s