for all people who are interested in a rack enclosure system, I have had a sample produced
The front panel is removable and can be replaced with a BPI-R4 panel at any time.
Furthermore, a board can also additional be installed on the left side (e.g. for redundancy). Then there is a front panel with openings on the left and right side.
All combinations are therefore possible
1x BPI-R3 or
1x BPI-R4 or
2x BPI-R3 or
2x BPI-R4 or
1x BPI-R3 & 1x BPI-R4
can you show more inside ???
I had it developed together with your team. So you have all the detailed information. I will make the final prototype available separately with photos.
mhm … it is a rack enclosure for R3 and R4 router. In my opinion your target group are not people who need wifi.
sure, I think some people are interested in that!
yes correct, not for peoples who are interested in Wifi and mobil 5G/4G/LTE. It is intended more for server rooms, data loggers, network technology. For the other cases I then use the conventional housing
new photo’s are available
for all interested from europe,
Distributor:
suitable board sizes BPI-R2/R3/R4/R64
is it possible to publish the 3d printables for the r3/r4 front panel plates?
thanks!
This is great,
can varia also supply the internal power supply with ready made cables, that would be very nice.
Please do not print “R4” or “R3” on the front panel, people will generally use this for their own products and label it themselves.
How do i get the correct front panel when ordering from varia?
Thanks!
Thats the final 19" 1U rack case. No label, and silver brackets. see image Banana Pi BPI-R3-R4 19” rack case enclosure - #7 by marco0711.
I am not an employee of varia store. Therefore, it is best to address your question directly to the store BPI - BPI-R3-R4 - 19" rack case enclosure.
