Banana Pi BPI-R3-R4 19” rack case enclosure

[marco0711 (Marco)]

for all people who are interested in a rack enclosure system, I have had a sample produced

The front panel is removable and can be replaced with a BPI-R4 panel at any time.

Furthermore, a board can also additional be installed on the left side (e.g. for redundancy). Then there is a front panel with openings on the left and right side.

All combinations are therefore possible

1x BPI-R3 or
1x BPI-R4 or
2x BPI-R3 or
2x BPI-R4 or
1x BPI-R3 & 1x BPI-R4

[sinovoip (bpi team)]

can you show more inside ???

[marco0711 (Marco)]

I had it developed together with your team. So you have all the detailed information. I will make the final prototype available separately with photos.

[Lorem_amicus (Michael Fischer)]

mhm … it is a rack enclosure for R3 and R4 router. In my opinion your target group are not people who need wifi.

sure, I think some people are interested in that!

[marco0711 (Marco)]

yes correct, not for peoples who are interested in Wifi and mobil 5G/4G/LTE. It is intended more for server rooms, data loggers, network technology. For the other cases I then use the conventional housing

[marco0711 (Marco)]

now, further information are available for all: BPI R3 R4 rack mount

[marco0711 (Marco)]

new photo’s are available

[marco0711 (Marco)]