[How To Change Default HDMI Configuration]

[Ash]

Hello, I tried various post suggestions while changing the uEnv.txt file and other options to get my 7" LCD working while connected with the board…but not succeed.

Please help me to set the configuration for my 7" LCD which is connected to the BPIM2-Berry via HDMI.

Thanks,

BR /Ash

[sinovoip (bpi team)]

[how to]the final solution of compulsive modification of HDMI output resolution

the final solution of compulsive modification of HDMI output resolution. As you may have discovered the common configuration method in raspberry pi (such as alteration of /boot/config.txt) does not work on BPI, neither does the modification of cmdline.txt and uEnv.txt especially for some display with converter(HDMI->VGA or HDMI ->IDVI) or some old display devices. Today,we are introducing a new solution to modify the resolution of HDMI, no other risks if you do it according to this document ste…

[Ash]

Hi sinovoip, thanks for your prompt reply. But I tried the same method which you suggested. It doesn’t work out. Please help. Thanks

[Ash]

Hi, I am facing the same issue. Nothing is displaying on my 7" LCD connected to BpiM2-berry via HDMI port and running on Ubuntu-mate. Please help! suggest any required configuration to active display. Thanks!!

For now (config.txt) shows like: max_usb_current = 1 hdmi_group = 2 hdmi_mode = 87 hdmi_cvt = 1024 600 60 6 0 0 0 hdmi_drive = 1 hdmi_force_hotplug = 1