BPI-4G LTE module for banana pi (USB interface)

[Eldes]

2mm pitch two row headers 14pin. For anyone else who may want to solder them on themself.

[mikew (Mike)]

Hi @sinovoip, I bought this 4G modem from Amazon for my BPI-R3 based on the generic guidance from posts of you that “Quectel EC25E” is the modem which is compatible.

https://wiki.banana-pi.org/Banana_Pi_BPI-R3#Accessories https://wiki.banana-pi.org/Getting_Started_with_BPI-R3#4G.265G

The product images are not correct but these are are matching the modem and extension board I have:

https://www.aliexpress.com/item/32858710717.html?spm=2114.12010611.0.0.376b30d95X7KqY&gatewayAdapt=glo2deu

Question is, I plugged the modem into the mPCIe and inserted the SIM on the respective card slot of the BPI-R3 too. However, OpenWrt constantly complaints that the SIM was not found. Can you provide some guidance if and how to get the modem running in the mPCIe slot?

I open this thread too to resolve the SIM Card not found issue.:

[BPI-R3]: BPI-4G LTE Module SIM

Hi, I am trying to get the Quectel EC25-E 4G modem to run on my BPI-R3. Trying both of the following documentations resulted in a similar issue “sim_not_present” I installed opkg install kmod-usb-net-qmi-wwan uqmi luci-proto-qmi kmod-usb-serial-qualcomm Rebooted and the device appears. I can configure the interface using the O2 settings [image] [image] Here is the syslog if that helps. Tue Oct 24 22:32:24 2023 daemon.notice netifd: Interface 'qmi_wwan' is setting up now Tue Oct 24 …

Thanks Mike

[nivruttidamdhar17 (Nivrutti Damdhar)]

Is this model is compatible with Banana Pi R2 Pro ??? to connecting with mPCIe interface