Sorry, what do you mean by this？
Good morning @simon, I mean, has it been considered to put the UART externally so we can communicate with the board?
I currently have it like the photo, but I don’t see how to put it on the box if there’s no output for them. I’ve seen people modifying it, but I don’t know if it’s exactly this way so we can have it externally.
Is it possible for the box to have the connections external?
Thanks for your reply.
OK,you mean the debug console UART，
This is 1.25mm pitch, you should use 2.54MM
you can use somthing like this，
1 Like
Good afternoon, that’s correct @simon. I wanted to know if the new case could have a dedicated external UART output, if it would come standard.
Or will we have to install it ourselves, but with an output like the first case,
since the photos don’t show any output on the new case.
Regards
Good afternoon @simon @sinovoip, could you please let us know how production is going for the new box, and for the be19000, if it will be released at the end of this month or by the end of June, or maybe earlier?
The image @simon be19000 will be released with 21.02. There will also be a variant for 24.10 in the first release.
Thanks for your response.
When will the new case be available?
Good afternoon @simon, @sinovoip, you mentioned on April 29th that you were mass producing.
Please let us know how everything is going and if it will be released roughly on what date.
Thank you.
Am i stupid or do i count 14 antennas needed for BE19000 and only 10 antenna ports are available at pro case? And would be nice to get 2 or 4 extra ports for 5g modems 
Good afternoon @simon, @sinovoip, can you please provide us with information on how the new case and the BE19000 are being manufactured?
About when it will go on sale.
Thanks for letting us know.
The design allows for a secondary board; providing space for extra fans could be beneficial for heat dissipation
any news here? Would like to see the final case
When will be the exact date of release? Will there be a possibility of wall mounting?
will redy next week.
4 Likes
Wait, this is the BPI R4 PRO?
Will the firmware update along with it?
Good morning, @sinovoip @simon. Do we have any news about when the new case along with the new BE19000 board will be available? Before the summer, it was said that it was being mass produced. The last update we have is from August by @sinovoip, stating that it was about to be released and was in mass production, just as it was in the summer.
Could you please give us more information about when it will go on sale?
Thank you for your work, and I look forward to your response.
1 Like
When will the new case be available?
@sinovip / @simon Just wanted to see if there was any news on this. I’d be very interested as the standard case is a bit difficult to put together, as well as tempermental due to how the how the wifi antenna wires must be run.
1 Like