Banana Pi BPI-M2 Plus new Armbian image

Banana Pi SBCs design BPI-M2+/BPI-M2 Zero/BPI-P2 Zero(H3)
1

Armbian_23.02.0-trunk_Bananapim2plus_bullseye_current_5.15.93.img.xz image

Armbian_23.02.0-trunk_Bananapim2plus_bullseye_edge_6.0.10_xfce_desktop.img.xz image

Armbian_23.02.0-trunk_Bananapim2plus_jammy_edge_6.1.11_xfce_desktop.img.xz image

  1. About this image:

    • This release is for banana pi M2 Plus board, which is based on Armbian operation system.
    • bullseye current version with 5.15.93 kernel.
    • bullseye edge version with 6.0.10 kernel.
    • jammy edge version with 6.1.11 kernel.

  2. Image link:

  3. Settings upon first startup:

    image
    image632×608 21.3 KB

More please see wiki page: https://wiki.banana-pi.org/Banana_Pi_BPI-M2%2B

1 Like
2

hi i have a problem with armbian, hdmi sound card is not displayed and no sound is output via hdmi this is what the command aplay -l gives **** List of PLAYBACK Hardware Devices **** card 0: Codec [H3 Audio Codec], device 0: CDC PCM Codec-0 [CDC PCM Codec-0] Subdevices: 1/1 Subdevice #0: subdevice #0 how can i solve this problem

3

If you are using unofficial Armbian from this topic, it is more then expected that things won’t work. It’s just a random trunk build.

This you perhaps need to ask people that developed software? This post here was made by end user that hasn’t been around for more then a year …

Armbian firmware is a product sponsored by Armbian team. We provide you and HW vendors OS with full control over the hardware.

Something doesn’t work? Possible. There is a build framework, aka software SDK, download it, fix the problems you face. Then share the fix. Or not. At least you will see how simple is to generate image in the post you are responding to.

Authors:

Support forums:

Original software: