Is there an updated image for the BPi-R3 Mini

[Chuck_PUP_Payne]

Hi,

So I have my Banana-Pi BPi-R3 Mini online, but I am unable to update the packages for OpenWRT. I am getting

Collected errors:

• opkg_download: Failed to download https://downloads.openwrt.org/releases/21.02-SNAPSHOT/targets/mediatek/mt7986/packages/Packages.gz, wget returned 8.
• opkg_download: Failed to download https://downloads.openwrt.org/releases/21.02-SNAPSHOT/packages/aarch64_cortex-a53/kenzo/Packages.gz, wget returned 8.
• opkg_download: Failed to download https://downloads.openwrt.org/releases/21.02-SNAPSHOT/packages/aarch64_cortex-a53/mtk_openwrt_feed/Packages.gz, wget returned 8.
• opkg_download: Failed to download https://downloads.openwrt.org/releases/21.02-SNAPSHOT/packages/aarch64_cortex-a53/small/Packages.gz, wget returned 8.

Is there an newer image, I am try update so I can install luci-ssl.

Spec of my build

I have flash the emmc with the following images 2023-09-12 BPI-R3 Mini OpenWRT image with MTK vendor driver, Not OpenSource Driver BS bl2_emmc.img

[frank-w]

Mainline openwrt (where downloads are done) does not support r3mini and i guess the version (21.02) available from bpi is no more supported in openwrt

Maybe daniel gets an r3mini in next round of samples

Banana Pi BPI-R3 Mini Router board with MediaTek MT7986(Filogic 830),support Wi-Fi 6,2.5GbE

SinoVoip never provided a sample to us OpenWrt developers and it is the first board on public sale with this Airoha 2.5G Ethernet PHY, so we do need a sample for testing before being able to offer official images. If you want official OpenWrt (ie. with working kmods from downloads.openwrt.org package feeds), please urge SinoVoip to provide a sample to OpenWrt devs – I will happily spend one afternoon creating the OpenWrt image and testing, but I won’t spend money for the hardware.

Eric and me already prepared dts for it,drivers are mostly already mainline (except the phy driver).

[Chuck_PUP_Payne]

So, there no luci-ssl, I guess for now? Is there a good doc explains how to setup the wireless, ssid via the commandline? I will go look but I figure I would ask you, because I know you done a ton work on the R series.