installation README.TXT
kernel 6.13.0-rc7
for overclocking 1.8ghz you need to enable boost:
echo 1 > /sys/devices/system/cpu/cpufreq/boost
echo userspace > /sys/devices/system/cpu/cpufreq/policy0/scaling_governor
echo 1800000 > /sys/devices/system/cpu/cpufreq/policy0/scaling_setspeed
mirror 1, mirror 2, mirror 3
irradium-3.7-riscv64-core-banana_pi_f3-6.13.0-rc7-build-20250119.img.zst
irradium-3.7-riscv64-core-banana_pi_f3-6.13.0-rc7-build-20250119.img.zst.sha256
irradium-3.7-riscv64-xfce-banana_pi_f3-6.13.0-rc7-build-20250119.img.zst
irradium-3.7-riscv64-xfce-banana_pi_f3-6.13.0-rc7-build-20250119.img.zst.sha256
[ 0.000000] Linux version 6.13.0-rc7+ (root@firefly-rk3399) (riscv64-unknown-linux-gnu-gcc (g2ee5e430018) 12.2.0, GNU ld (GNU Binutils) 2.40.0.20230214) #1 SMP PREEMPT Sun Jan 19 10:11:03 EET 2025
[ 0.000000] Machine model: BananaPi BPI-F3
[ 0.000000] SBI specification v1.0 detected
[ 0.000000] SBI implementation ID=0x1 Version=0x10003
[ 0.000000] SBI IPI extension detected
[ 0.000000] SBI RFENCE extension detected
[ 0.000000] earlycon: sbi0 at I/O port 0x0 (options '')
[ 0.000000] printk: legacy bootconsole [sbi0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000065600000, size 384 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x0000000065600000..0x000000007d5fffff (393216 KiB) map reusable linux,cma
[ 0.000000] OF: reserved mem: 0x000000007f000000..0x000000007fffffff (16384 KiB) map non-reusable framebuffer@7f000000
[ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable mmode_resv0@0
[ 0.000000] OF: reserved mem: 0x00000000c0800000..0x00000000c083ffff (256 KiB) nomap non-reusable mem@c0800000
[ 0.000000] OF: reserved mem: 0x0000000030000000..0x00000000301fffff (2048 KiB) nomap non-reusable mem@30000000
[ 0.000000] OF: reserved mem: 0x0000000030200000..0x0000000030202fff (12 KiB) nomap non-reusable vdev0vring0@30200000
[ 0.000000] OF: reserved mem: 0x0000000030203000..0x0000000030205fff (12 KiB) nomap non-reusable vdev0vring1@30203000
[ 0.000000] Reserved memory: created DMA memory pool at 0x0000000030206000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node vdev0buffer@30206000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x0000000030206000..0x00000000302fbfff (984 KiB) nomap non-reusable vdev0buffer@30206000
[ 0.000000] OF: reserved mem: 0x00000000302fc000..0x00000000302fffff (16 KiB) nomap non-reusable rsc_table@302fc000
[ 0.000000] OF: reserved mem: 0x0000000030300000..0x000000003033ffff (256 KiB) nomap non-reusable rcpu_mem_snapshots@30300000
[ 0.000000] Reserved memory: created DMA memory pool at 0x000000002ff40000, size 0 MiB
[ 0.000000] OF: reserved mem: initialized node dpu_reserved@2ff40000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x000000002ff40000..0x000000002fffffff (768 KiB) nomap non-reusable dpu_reserved@2ff40000
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] Normal [mem 0x0000000080000000-0x000000017fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff]
[ 0.000000] node 0: [mem 0x0000000000080000-0x000000002ff3ffff]
[ 0.000000] node 0: [mem 0x000000002ff40000-0x000000003033ffff]
[ 0.000000] node 0: [mem 0x0000000030340000-0x000000007fffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000017fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000017fffffff]
[ 0.000000] On node 0, zone Normal: 524288 pages in unavailable ranges
[ 0.000000] SBI HSM extension detected
[ 0.000000] riscv: base ISA extensions acdfimv
[ 0.000000] riscv: ELF capabilities acdfimv
[ 0.000000] Ticket spinlock: enabled
[ 0.000000] percpu: Embedded 31 pages/cpu s86040 r8192 d32744 u126976
[ 0.000000] pcpu-alloc: s86040 r8192 d32744 u126976 alloc=31*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Kernel command line: earlycon=sbi earlyprintk console=tty1 console=ttyS0,115200 loglevel=8 clk_ignore_unused swiotlb=65536 rdinit=/init root=/dev/mmcblk0p2 rootwait rootfstype=ext4 board=bpi-f3
[ 0.000000] Unknown kernel command line parameters "board=bpi-f3", will be passed to user space.
[ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1048576
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 8.
[ 0.000000] software IO TLB: mapped [mem 0x000000005d600000-0x0000000065600000] (128MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[ 0.000000] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] riscv-intc: 64 local interrupts mapped
[ 0.000000] riscv-plic: interrupt-controller@e0000000: mapped 159 interrupts with 8 handlers for 16 contexts.
[ 0.000000] riscv: providing IPIs using SBI IPI extension
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] riscv-timer: Timer interrupt in S-mode is available via sstc extension
[ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000000] sched_clock: 64 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.008496] Console: colour dummy device 80x25
[ 0.012635] printk: legacy console [tty1] enabled
[ 0.018023] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.027709] pid_max: default: 32768 minimum: 301
[ 0.032575] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.039877] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.060047] riscv: ELF compat mode unsupported
[ 0.060083] ASID allocator using 16 bits (65536 entries)
[ 0.067191] rcu: Hierarchical SRCU implementation.
[ 0.071933] rcu: Max phase no-delay instances is 1000.
[ 0.077439] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.085869] EFI services will not be available.
[ 0.090504] smp: Bringing up secondary CPUs ...
[ 0.099850] smp: Brought up 1 node, 8 CPUs
[ 0.102280] Memory: 3490764K/4194304K available (17608K kernel code, 6940K rwdata, 8192K rodata, 2394K init, 563K bss, 302972K reserved, 393216K cma-reserved)
[ 0.117365] devtmpfs: initialized
[ 0.131559] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.138514] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.150529] pinctrl core: initialized pinctrl subsystem
[ 0.153722] DMI not present or invalid.
[ 0.157327] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.163951] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.170329] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.178452] display class register
[ 0.181726] thermal_sys: Registered thermal governor 'step_wise'
[ 0.181768] cpuidle: using governor menu
[ 0.219699] cpu1: Ratio of byte access time to unaligned word access is 2.05, unaligned accesses are fast
[ 0.219699] cpu3: Ratio of byte access time to unaligned word access is 2.40, unaligned accesses are fast
[ 0.219699] cpu2: Ratio of byte access time to unaligned word access is 2.27, unaligned accesses are fast
[ 0.219702] cpu4: Ratio of byte access time to unaligned word access is 1.54, unaligned accesses are fast
[ 0.219702] cpu6: Ratio of byte access time to unaligned word access is 1.57, unaligned accesses are fast
[ 0.219702] cpu7: Ratio of byte access time to unaligned word access is 1.51, unaligned accesses are fast
[ 0.219702] cpu5: Ratio of byte access time to unaligned word access is 1.71, unaligned accesses are fast
[ 0.307775] cpu0: Ratio of byte access time to unaligned word access is 10.12, unaligned accesses are fast
[ 0.314617] The real ratio of byte access time to unaligned word access should refer to the value of CPU0
[ 0.324233] Cpu0 unaligned access is more efficient than nonboot cores, because of system bandwidth preemption.
[ 0.334380] Nonboot cpus' unaligned access ratio measured simultaneously, but cpu0's measure is separately
[ 0.351216] /soc: Fixed dependency cycle(s) with /soc/hdmi@C0400500
[ 0.356856] /soc/hdmi@C0400500: Fixed dependency cycle(s) with /soc
[ 0.361011] /soc/hdmi@C0400500: Fixed dependency cycle(s) with /soc/pinctrl@d401e000/hdmi_0_grp
[ 0.369766] /soc/hdmi@C0400500: Fixed dependency cycle(s) with /soc/power-management@0/power-controller
[ 0.379227] /soc/hdmi@C0400500: Fixed dependency cycle(s) with /soc/reset-controller@d4050000
[ 0.387821] /soc/hdmi@C0400500: Fixed dependency cycle(s) with /soc/clock-controller@d4050000
[ 0.396421] /soc/hdmi@C0400500: Fixed dependency cycle(s) with /soc/interrupt-controller@e0000000
[ 0.406949] /soc/pinctrl@d401e000: Fixed dependency cycle(s) with /soc/interrupt-controller@e0000000
[ 0.414581] /soc/pinctrl@d401e000: Fixed dependency cycle(s) with /soc/reset-controller@d4050000
[ 0.423421] /soc/pinctrl@d401e000: Fixed dependency cycle(s) with /soc/clock-controller@d4050000
[ 0.433921] pinctrl-single d401e000.pinctrl: 148 pins, size 592
[ 0.445881] /soc/pcie@ca400000: Fixed dependency cycle(s) with /soc/pcie@ca400000/interrupt-controller@0
[ 0.452937] /soc/pcie@ca800000: Fixed dependency cycle(s) with /soc/pcie@ca800000/interrupt-controller@0
[ 0.464546] /soc: Fixed dependency cycle(s) with /soc/hdmi@C0400500
[ 0.468516] /soc/hdmi@C0400500: Fixed dependency cycle(s) with /soc
[ 0.474849] /soc/hdmi@C0400500: Fixed dependency cycle(s) with /soc/reset-controller@d4050000
[ 0.483365] /soc/hdmi@C0400500: Fixed dependency cycle(s) with /soc/clock-controller@d4050000
[ 0.491957] /soc/hdmi@C0400500: Fixed dependency cycle(s) with /soc/interrupt-controller@e0000000
[ 0.506306] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.510295] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.516598] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.523449] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.529784] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.536641] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.610883] raid6: int64x8 gen() 1031 MB/s
[ 0.678932] raid6: int64x4 gen() 1574 MB/s
[ 0.746995] raid6: int64x2 gen() 1653 MB/s
[ 0.815035] raid6: int64x1 gen() 1371 MB/s
[ 0.816455] raid6: using algorithm int64x2 gen() 1653 MB/s
[ 0.887084] raid6: .... xor() 838 MB/s, rmw enabled
[ 0.889102] raid6: using intx1 recovery algorithm
[ 0.894469] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 0.906025] mmp-pdma d4000000.pdma: PM domain power-domain@SPT_PD_BUS will not be powered off
[ 0.912360] SCSI subsystem initialized
[ 0.915795] libata version 3.00 loaded.
[ 0.919600] usbcore: registered new interface driver usbfs
[ 0.925025] usbcore: registered new interface driver hub
[ 0.930412] usbcore: registered new device driver usb
[ 0.937823] /soc/i2c@d401d800/spm8821@41: Fixed dependency cycle(s) with /soc/i2c@d401d800/spm8821@41/regulators/DCDC_REG5
[ 0.962769] spacemit-regulator spacemit-regulator@spm8821: DMA mask not set
[ 1.014572] /soc/i2c@d401d800/spm8821@41: Fixed dependency cycle(s) with /soc/i2c@d401d800/spm8821@41/regulators
[ 1.022975] mc: Linux media interface: v0.10
[ 1.026357] videodev: Linux video capture interface: v2.00
[ 1.031861] pps_core: LinuxPPS API ver. 1 registered
[ 1.036862] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 1.046081] PTP clock support registered
[ 1.050789] Advanced Linux Sound Architecture Driver Initialized.
[ 1.056808] Bluetooth: Core ver 2.22
[ 1.059881] NET: Registered PF_BLUETOOTH protocol family
[ 1.065248] Bluetooth: HCI device and connection manager initialized
[ 1.071666] Bluetooth: HCI socket layer initialized
[ 1.076615] Bluetooth: L2CAP socket layer initialized
[ 1.081739] Bluetooth: SCO socket layer initialized
[ 1.087036] vgaarb: loaded
[ 1.089977] clocksource: Switched to clocksource riscv_clocksource
[ 1.096156] VFS: Disk quotas dquot_6.6.0
[ 1.099769] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.117321] NET: Registered PF_INET protocol family
[ 1.119596] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 1.131042] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 1.136781] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 1.144564] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 1.152690] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 1.161064] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.166776] UDP hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 1.173572] UDP-Lite hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 1.181015] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 1.187079] RPC: Registered named UNIX socket transport module.
[ 1.192475] RPC: Registered udp transport module.
[ 1.197233] RPC: Registered tcp transport module.
[ 1.202006] RPC: Registered tcp-with-tls transport module.
[ 1.207561] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.215033] PCI: CLS 0 bytes, default 64
[ 1.218733] Unpacking initramfs...
[ 1.222901] Initialise system trusted keyrings
[ 1.226427] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 1.233405] NFS: Registering the id_resolver key type
[ 1.237765] Key type id_resolver registered
[ 1.241974] Key type id_legacy registered
[ 1.246106] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.252838] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.261888] Key type cifs.idmap registered
[ 1.264503] ntfs3: Enabled Linux POSIX ACLs support
[ 1.269410] ntfs3: Read-only LZX/Xpress compression included
[ 1.275190] fuse: init (API version 7.41)
[ 1.279787] SGI XFS with ACLs, security attributes, quota, no debug enabled
[ 1.349926] NET: Registered PF_ALG protocol family
[ 1.351952] xor: measuring software checksum speed
[ 1.357501] 8regs : 4716 MB/sec
[ 1.361939] 32regs : 4532 MB/sec
[ 1.366234] rvv : 5501 MB/sec
[ 1.370057] xor: using function: rvv (5501 MB/sec)
[ 1.374929] async_tx: api initialized (async)
[ 1.379351] Key type asymmetric registered
[ 1.383523] Asymmetric key parser 'x509' registered
[ 1.388924] io scheduler mq-deadline registered
[ 1.393120] io scheduler kyber registered
[ 1.395190] Freeing initrd memory: 6288K
[ 1.397188] io scheduler bfq registered
[ 1.408404] spacemit-pmic-pinctrl spacemit-pinctrl@spm8821: DMA mask not set
[ 1.419751] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.423661] k1x-dwc-pcie ca400000.pcie: has no power on gpio.
[ 1.431000] k1x-dwc-pcie ca400000.pcie: host bridge /soc/pcie@ca400000 ranges:
[ 1.436074] k1x-dwc-pcie ca400000.pcie: IO 0x009f002000..0x009f101fff -> 0x009f002000
[ 1.444489] k1x-dwc-pcie ca400000.pcie: MEM 0x0090000000..0x009effffff -> 0x0090000000
[ 1.552994] k1x-dwc-pcie ca400000.pcie: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 4G
[ 2.517984] k1x-dwc-pcie ca400000.pcie: Phy link never came up
[ 2.521483] k1x-dwc-pcie ca400000.pcie: PCI host bridge to bus 0001:00
[ 2.527626] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 2.533127] pci_bus 0001:00: root bus resource [io 0x0000-0xfffff] (bus address [0x9f002000-0x9f101fff])
[ 2.542770] pci_bus 0001:00: root bus resource [mem 0x90000000-0x9effffff]
[ 2.549798] pci 0001:00:00.0: [201f:0001] type 01 class 0x060400 PCIe Root Port
[ 2.557100] pci 0001:00:00.0: BAR 0 [mem 0x00000000-0x000fffff]
[ 2.563073] pci 0001:00:00.0: BAR 1 [mem 0x00000000-0x000fffff]
[ 2.569062] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 2.574371] pci 0001:00:00.0: bridge window [io 0x0000-0x0fff]
[ 2.580522] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff]
[ 2.587381] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 2.595247] pci 0001:00:00.0: supports D1
[ 2.599268] pci 0001:00:00.0: PME# supported from D0 D1 D3hot D3cold
[ 2.610300] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 2.614146] pci 0001:00:00.0: BAR 0 [mem 0x90000000-0x900fffff]: assigned
[ 2.620952] pci 0001:00:00.0: BAR 1 [mem 0x90100000-0x901fffff]: assigned
[ 2.627806] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 2.632844] pci_bus 0001:00: resource 4 [io 0x0000-0xfffff]
[ 2.638562] pci_bus 0001:00: resource 5 [mem 0x90000000-0x9effffff]
[ 2.647081] pcieport 0001:00:00.0: PME: Signaling with IRQ 65
[ 2.651145] pcieport 0001:00:00.0: AER: enabled with IRQ 65
[ 2.657096] k1x-dwc-pcie ca800000.pcie: has no power on gpio.
[ 2.664443] k1x-dwc-pcie ca800000.pcie: host bridge /soc/pcie@ca800000 ranges:
[ 2.669498] k1x-dwc-pcie ca800000.pcie: IO 0x00b7002000..0x00b7101fff -> 0x00b7002000
[ 2.677921] k1x-dwc-pcie ca800000.pcie: MEM 0x00a0000000..0x00afffffff -> 0x00a0000000
[ 2.686335] k1x-dwc-pcie ca800000.pcie: MEM 0x00b0000000..0x00b6ffffff -> 0x00b0000000
[ 2.794832] k1x-dwc-pcie ca800000.pcie: iATU: unroll T, 8 ob, 8 ib, align 4K, limit 4G
[ 3.757982] k1x-dwc-pcie ca800000.pcie: Phy link never came up
[ 3.761121] k1x-dwc-pcie ca800000.pcie: PCI host bridge to bus 0002:00
[ 3.767590] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 3.773125] pci_bus 0002:00: root bus resource [io 0x100000-0x1fffff] (bus address [0xb7002000-0xb7101fff])
[ 3.783022] pci_bus 0002:00: root bus resource [mem 0xa0000000-0xafffffff pref]
[ 3.790398] pci_bus 0002:00: root bus resource [mem 0xb0000000-0xb6ffffff]
[ 3.797429] pci 0002:00:00.0: [201f:0001] type 01 class 0x060400 PCIe Root Port
[ 3.804735] pci 0002:00:00.0: BAR 0 [mem 0x00000000-0x000fffff]
[ 3.810710] pci 0002:00:00.0: BAR 1 [mem 0x00000000-0x000fffff]
[ 3.816700] pci 0002:00:00.0: PCI bridge to [bus 01-ff]
[ 3.821995] pci 0002:00:00.0: bridge window [io 0x0000-0x0fff]
[ 3.828156] pci 0002:00:00.0: bridge window [mem 0x00000000-0x000fffff]
[ 3.835017] pci 0002:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 3.842884] pci 0002:00:00.0: supports D1
[ 3.846906] pci 0002:00:00.0: PME# supported from D0 D1 D3hot D3cold
[ 3.857947] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01
[ 3.861811] pci 0002:00:00.0: BAR 0 [mem 0xb0000000-0xb00fffff]: assigned
[ 3.868642] pci 0002:00:00.0: BAR 1 [mem 0xb0100000-0xb01fffff]: assigned
[ 3.875502] pci 0002:00:00.0: PCI bridge to [bus 01]
[ 3.880532] pci_bus 0002:00: resource 4 [io 0x100000-0x1fffff]
[ 3.886582] pci_bus 0002:00: resource 5 [mem 0xa0000000-0xafffffff pref]
[ 3.893287] pci_bus 0002:00: resource 6 [mem 0xb0000000-0xb6ffffff]
[ 3.901777] pcieport 0002:00:00.0: PME: Signaling with IRQ 69
[ 3.905880] pcieport 0002:00:00.0: AER: enabled with IRQ 69
[ 3.969695] d4017000.serial: ttyS0 at MMIO 0xd4017000 (irq = 73, base_baud = 921250) is a UART1
[ 3.975763] printk: legacy console [ttyS0] enabled
[ 3.985310] printk: legacy bootconsole [sbi0] disabled
[ 3.999126] d4017100.uart: ttyS1 at MMIO 0xd4017100 (irq = 74, base_baud = 3600000) is a UART2
[ 4.008171] serial serial0: tty port ttyS1 registered
[ 4.033214] PVR_K: 1: Read BVNC 36.29.52.182 from HW device registers
[ 4.040002] PVR_K: 1: RGX Device registered BVNC 36.29.52.182 with 1 core in the system
[ 4.049137] [drm] Initialized pvr 24.2.6603887 for cac00000.imggpu on minor 0
[ 4.064567] loop: module loaded
[ 4.070501] Rounding down aligned max_sectors from 4294967295 to 4294967288
[ 4.077829] db_root: cannot open: /etc/target
[ 4.083708] k1x-qspi d420c000.spi: config mfp for cs:[0]
[ 4.089324] k1x-qspi d420c000.spi: AHB buf size: 512
[ 4.094937] spi-nor spi4.0: unrecognized JEDEC id bytes: 00 00 00 00 00 00
[ 4.101994] k1x-qspi d420c000.spi: Runtime PM usage count underflow!
[ 4.109605] CAN device driver interface
[ 4.364963] usbcore: registered new interface driver cdc_ether
[ 4.370979] usbcore: registered new interface driver cdc_subset
[ 4.377002] usbcore: registered new interface driver zaurus
[ 4.384413] spacemit-k1x-combphy c0b10000.phy: USB3 PHY init.
[ 4.392473] mv-ehci mv-ehci1: Spacemit EHCI
[ 4.396810] mv-ehci mv-ehci1: new USB bus registered, assigned bus number 1
[ 4.404055] mv-ehci mv-ehci1: irq 81, io mem 0xc0980100
[ 4.417992] mv-ehci mv-ehci1: USB 2.0 started, EHCI 1.00
[ 4.424249] hub 1-0:1.0: USB hub found
[ 4.428120] hub 1-0:1.0: 1 port detected
[ 4.433326] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 4.438979] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 4.446952] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe6d hci version 0x110 quirks 0x0000808000000090
[ 4.456964] xhci-hcd xhci-hcd.0.auto: irq 80, io mem 0xc0a00000
[ 4.463158] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 4.468764] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 3
[ 4.476541] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 4.483802] hub 2-0:1.0: USB hub found
[ 4.487661] hub 2-0:1.0: 1 port detected
[ 4.492010] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.500713] hub 3-0:1.0: USB hub found
[ 4.504560] hub 3-0:1.0: 1 port detected
[ 4.509177] usbcore: registered new interface driver uas
[ 4.514758] usbcore: registered new interface driver usb-storage
[ 4.521110] spacemit-usb3-hub soc:usb3hub@0: v1.0.2
[ 4.541983] spacemit-usb3-hub soc:usb3hub@0: onboard usb hub driver probed, hub configured
[ 4.550933] K1X_UDC: mv_udc_probe enter ...
[ 4.555579] mv-udc mv-udc: use 32bit DMA mask
[ 4.560119] mv_udc: dqh size = 0x800 udc->ep_dqh_dma = 0x280b000
[ 4.566863] mv-udc mv-udc: successful probe UDC device without clock gating.
[ 4.574402] f_tcm: UAS support multiple cmds
[ 4.579234] spacemit-pmic-pwrkey spacemit-pwrkey@spm8821: DMA mask not set
[ 4.638714] input: spacemit pwrkey as /devices/platform/soc/d401d800.i2c/i2c-8/8-0041/spacemit-pwrkey@spm8821/input/input0
[ 4.651102] spacemit-pmic-rtc spacemit-rtc@spm8821: DMA mask not set
[ 4.684768] spacemit-pmic-rtc spacemit-rtc@spm8821: registered as rtc0
[ 4.696717] spacemit-pmic-rtc spacemit-rtc@spm8821: setting system clock to 2000-01-01T11:56:06 UTC (946727766)
[ 4.707935] i2c_dev: i2c /dev entries driver
[ 4.715233] MVX dev: Linlon v5276 identified. cores=2, nlsid=4, id=0, fuse=00000000, hw_id=00005276, hw_rev=00000050
[ 4.727251] d420a000.csiphy begin to probe
[ 4.731500] d420a000.csiphy probed
[ 4.731616] d4206000.csiphy begin to probe
[ 4.739258] d4206000.csiphy probed
[ 4.740395] d420a000.ccic probed in k1x_ccic_probe
[ 4.744747] d420a800.ccic probed in k1x_ccic_probe
[ 4.750389] d4206000.ccic probed in k1x_ccic_probe
[ 4.759543] acquire ccic0 ctrl dev succeed
[ 4.768638] acquire ccic1 ctrl dev succeed
[ 4.772803] acquire ccic2 ctrl dev succeed
[ 4.783169] usbcore: registered new interface driver uvcvideo
[ 4.793997] device-mapper: uevent: version 1.0.3
[ 4.799032] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
[ 4.808595] device-mapper: multipath round-robin: version 1.2.0 loaded
[ 4.815250] device-mapper: multipath queue-length: version 0.2.0 loaded
[ 4.821995] device-mapper: multipath service-time: version 0.3.0 loaded
[ 4.828708] device-mapper: multipath historical-service-time: version 0.1.1 loaded
[ 4.836468] Bluetooth: HCI UART driver ver 2.3
[ 4.840998] Bluetooth: HCI UART protocol H4 registered
[ 4.846286] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 4.857471] sdhci: Secure Digital Host Controller Interface driver
[ 4.863768] sdhci: Copyright(c) Pierre Ossman
[ 4.868152] sdhci-pltfm: SDHCI platform and OF driver helper
[ 4.874619] sdhci-spacemit d4280000.sdh: Got CD GPIO
[ 4.916491] mmc0: SDHCI controller on d4280000.sdh [d4280000.sdh] using ADMA
[ 4.950538] mmc1: SDHCI controller on d4280800.sdh [d4280800.sdh] using ADMA
[ 4.957741] sdio: save sdio_host <- (____ptrval____)
[ 4.995526] mmc0: set tx_delaycode: 95
[ 5.000432] mmc0: pass window [0 20)
[ 5.004196] mmc0: pass window [21 22)
[ 5.014623] mmc0: pass window [79 243)
[ 5.018584] mmc0: pass window [244 245)
[ 5.022838] mmc0: pass window [255 256)
[ 5.026817] mmc0: tuning done, use the firstly delay_code:160
[ 5.033452] mmc0: new UHS-I speed SDR104 SDXC card at address 5048
[ 5.040561] mmcblk0: mmc0:5048 SD64G 58.0 GiB
[ 5.051361] mmcblk0: p1 p2
[ 5.088430] mmc2: new HS400 Enhanced strobe MMC card at address 0001
[ 5.095700] mmcblk2: mmc2:0001 AJTD4R 14.6 GiB
[ 5.102062] mmcblk2boot0: mmc2:0001 AJTD4R 4.00 MiB
[ 5.108293] mmcblk2boot1: mmc2:0001 AJTD4R 4.00 MiB
[ 5.114466] mmcblk2rpmb: mmc2:0001 AJTD4R 4.00 MiB, chardev (242:0)
[ 5.120948] mmc2: SDHCI controller on d4281000.sdh [d4281000.sdh] using ADMA
[ 5.130705] usbcore: registered new interface driver usbhid
[ 5.136387] usbhid: USB HID core driver
[ 5.141441] remoteproc remoteproc0: rcpu_rproc is available
[ 5.150072] remoteproc remoteproc0: powering up rcpu_rproc
[ 5.168067] remoteproc remoteproc0: Booting fw image esos.elf, size 562152
[ 5.176661] rproc-virtio rproc-virtio.2.auto: assigned reserved memory node vdev0buffer@30206000
[ 5.189567] virtio_rpmsg_bus virtio0: rpmsg host is online
[ 5.195143] rproc-virtio rproc-virtio.2.auto: registered virtio0 (type 7)
[ 5.201998] remoteproc remoteproc0: remote processor rcpu_rproc is now up
[ 5.209791] riscv-pmu-sbi: SBI PMU extension is available
[ 5.215342] riscv-pmu-sbi: 16 firmware and 18 hardware counters
[ 5.224157] es8326 2-0019: Can not read property hp-detect-gpio
[ 5.230226] es8326 2-0019: Can not read property mic-detect-gpio
[ 5.236321] es8326 2-0019: assuming static mclk
[ 5.242239] xt_time: kernel timezone is -0000
[ 5.246704] IPVS: Registered protocols (TCP, UDP)
[ 5.251458] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[ 5.259025] IPVS: ipvs loaded.
[ 5.262136] IPVS: [rr] scheduler registered.
[ 5.266585] Initializing XFRM netlink socket
[ 5.271006] NET: Registered PF_INET6 protocol family
[ 5.277295] Segment Routing with IPv6
[ 5.281082] In-situ OAM (IOAM) with IPv6
[ 5.285198] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 5.291869] NET: Registered PF_PACKET protocol family
[ 5.297055] Bridge firewalling registered
[ 5.301136] can: controller area network core
[ 5.305579] NET: Registered PF_CAN protocol family
[ 5.310443] can: raw protocol
[ 5.313438] can: broadcast manager protocol
[ 5.317694] can: netlink gateway - max_hops=1
[ 5.322324] Bluetooth: RFCOMM TTY layer initialized
[ 5.327284] Bluetooth: RFCOMM socket layer initialized
[ 5.332490] Bluetooth: RFCOMM ver 1.11
[ 5.336301] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.341679] Bluetooth: BNEP socket layer initialized
[ 5.346719] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 5.352699] Bluetooth: HIDP socket layer initialized
[ 5.357768] 8021q: 802.1Q VLAN Support v1.8
[ 5.362091] Key type dns_resolver registered
[ 5.377104] Loading compiled-in X.509 certificates
[ 5.382040] usb 2-1: new high-speed USB device number 2 using xhci-hcd
[ 5.390786] Btrfs loaded, zoned=no, fsverity=no
[ 5.406244] suspend: SBI SUSP extension detected
[ 5.413281] [drm] spacemit_dpu_bind()
[ 5.417310] spacemit-dpu-drv soc:port@c0440000: assigned reserved memory node dpu_reserved@2ff40000
[ 5.426953] [drm] dpu plane init ok
[ 5.430509] spacemit-drm-drv c0440000.display-subsystem-hdmi: bound soc:port@c0440000 (ops dpu_component_ops)
[ 5.440954] spacemit-drm-drv c0440000.display-subsystem-hdmi: bound c0400500.hdmi (ops spacemit_hdmi_ops)
[ 5.450825] [drm] spacemit_hdmi_connector_detect() hdmi status connected
[ 5.458145] [drm] Initialized spacemit 1.0.0 for c0440000.display-subsystem-hdmi on minor 1
[ 5.466627] [drm] spacemit_hdmi_connector_detect() hdmi status connected
[ 5.473413] [drm] spacemit_hdmi_get_edid_block() len 128
[ 5.497928] [drm] spacemit_hdmi_get_edid_block() len 128
[ 5.507750] [drm] spacemit_crtc_atomic_enable(power on)
[ 5.507822] [drm] dpu_init
[ 5.507857] [drm] spacemit_hdmi_encoder_enable()
[ 5.507867] [drm] spacemit_hdmi_setup() id 0xa08501, hdmi 10bpc
[ 5.508108] [drm] DPU type 0 id 2 Start!
[ 5.524863] Console: switching to colour frame buffer device 240x67
[ 5.571511] hub 2-1:1.0: USB hub found
[ 5.573725] spacemit-drm-drv c0440000.display-subsystem-hdmi: [drm] fb0: spacemitdrmfb frame buffer device
[ 5.577755] hub 2-1:1.0: 5 ports detected
[ 5.603121] spacemit-socinfo soc:socinfo@0: Spacemit: CPU[K1-6370] REV[A] DRO[127] Detected
[ 5.612960] cam_inf:snr (cam_sensor_probe 1467): camera sensor begin to probed
[ 5.621254] cam_inf:snr (cam_sensor_probe 1485): camera sensor0 probed
[ 5.628564] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.643102] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.649707] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 5.657801] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 5.659300] clk: Not disabling unused clocks
[ 5.666253] usb 3-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 5.677713] PM: genpd: Disabling unused power domains
[ 5.682920] ALSA device list:
[ 5.685954] No soundcards found.
[ 5.691244] Freeing unused kernel image (initmem) memory: 2392K
[ 5.697367] Run /init as init process
[ 5.701122] with arguments:
[ 5.704144] /init
[ 5.706469] with environment:
[ 5.709656] HOME=/
[ 5.712069] TERM=linux
[ 5.714825] board=bpi-f3
[ 5.811541] hub 3-1:1.0: USB hub found
[ 5.817344] hub 3-1:1.0: 4 ports detected
[ 5.865900] EXT4-fs (mmcblk0p2): mounted filesystem 32539e08-a5c0-4084-9f32-0932043d95e3 r/w without journal. Quota mode: none.
[ 6.136391] udevd[218]: starting version 3.2.14
[ 6.338024] usb 2-1.5: new high-speed USB device number 3 using xhci-hcd
[ 11.682006] random: crng init done
[ 11.716742] udevd[218]: specified group 'netdev' unknown
[ 11.726460] udevd[221]: starting eudev-3.2.14
[ 11.890508] cam clk[csi_func]: 624000000
[ 11.890521] cam clk[csi_func]: 624000000
[ 11.890609] cam clk[ccic4x_func]: 624000000
[ 11.892122] cam clk[csi_func]: 624000000
[ 11.892156] cam clk[ccic4x_func]: 624000000
[ 11.892162] ccic1 clock enabled
[ 11.892454] ccic1 clock disabled
[ 11.895692] cam clk[ccic4x_func]: 624000000
[ 11.903762] ccic2 clock enabled
[ 11.907229] ccic0 clock enabled
[ 11.911507] ccic2 clock disabled
[ 11.915151] ccic0 clock disabled
[ 12.261323] EXT4-fs: Remounting file system with no journal so ignoring journalled data option
[ 12.313849] EXT4-fs (mmcblk0p2): re-mounted 32539e08-a5c0-4084-9f32-0932043d95e3 ro. Quota mode: none.
[ 12.415086] EXT4-fs: Remounting file system with no journal so ignoring journalled data option
[ 12.448663] EXT4-fs (mmcblk0p2): re-mounted 32539e08-a5c0-4084-9f32-0932043d95e3 r/w. Quota mode: none.
[ 12.472529] EXT4-fs (mmcblk0p1): mounted filesystem 5c205338-1b02-4bc9-a396-dc0fe556357f r/w with ordered data mode. Quota mode: none.
[ 15.195695] RTW: module init start
[ 15.202451] RTW: rtl8852bs v1.19.7.1-91-gcb07686050.20240409
[ 15.211390] RTW: build time: Jan 19 2025 03:00:20
[ 15.219309] RTW:
[ 15.224358] RTW: =======================================================
[ 15.234287] RTW: ==== Launching Wi-Fi driver! (Powered by Spacemit) ====
[ 15.244184] RTW: =======================================================
[ 15.254081] RTW: Realtek rtl8852bs WiFi driver (Powered by Spacemit,Ver v1.19.7.1-91-gcb07686050.20240409) init.
[ 15.267528] spacemit-rf-pwrseq rf-pwrseq: turn power on
[ 15.276945] spacemit-rf-pwrseq rf-pwrseq: check voltage: 1800000
[ 15.406235] RTW: module init ret=0
[ 15.417996] sdhci-spacemit d4280800.sdh: card claims to support voltages below defined range
[ 15.421405] udevd[221]: specified group 'netdev' unknown
Can I please ask you to elaborate a bit more on the topic? Not sure how the boot process work on BPI-f3. Nor do I know which specific changes there are present between ‘your’ kernel and stock Bianbu kernel…
(Only jack output; no HDMI or BT headset output… but I think I can live with that… 
)