[BPI-R64] loading OpenWRT built files into the board

Ivan_Revyakin · October 23, 2019, 6:59am

List 2 (part 2)

CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCF857X=m
CONFIG_GPIO_74X164=m
CONFIG_W1=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_GPIO=m
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2413=m
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_SYSCON=y
CONFIG_POWER_SUPPLY=y
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_GPIO_FAN=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM95241=m
CONFIG_PMBUS=m
CONFIG_SENSORS_ZL6100=m
CONFIG_SENSORS_PWM_FAN=m
CONFIG_SENSORS_SHT21=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP103=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_W83793=m
CONFIG_THERMAL=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_OF=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_CPU_THERMAL=y
CONFIG_CLOCK_THERMAL=y
CONFIG_THERMAL_EMULATION=y
CONFIG_MTK_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_SYSFS=y
CONFIG_SOFT_WATCHDOG=m
CONFIG_MEDIATEK_WATCHDOG=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=y
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_MFD_SYSCON=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_MT6380=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2=m
CONFIG_MEDIA_USB_SUPPORT=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_KONICA=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SE401=m
CONFIG_USB_GSPCA_SN9C20X=m
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_ZC3XX=m
CONFIG_USB_PWC=m
CONFIG_VIDEO_CPIA2=m
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_SEQ_DEVICE=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_COMPRESS_OFFLOAD=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=16
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VMASTER=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_SEQUENCER_OSS=m
CONFIG_SND_SEQ_MIDI_EVENT=m
CONFIG_SND_SEQ_MIDI=m
CONFIG_SND_SEQ_VIRMIDI=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_PCI=y
CONFIG_SND_ENS1371=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_SOC=m
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_I2C_AND_SPI=m
CONFIG_SND_SOC_AC97_CODEC=m
CONFIG_AC97_BUS=m
CONFIG_HID=m
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_HID_GENERIC=m
CONFIG_USB_HID=m
CONFIG_USB_HIDDEV=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_LEDS_TRIGGER_USBPORT=m
CONFIG_USB_MON=m
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_XHCI_PLATFORM=m
CONFIG_USB_XHCI_MTK=y
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=m
CONFIG_USB_EHCI_HCD_PLATFORM=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_PCI=m
CONFIG_USB_OHCI_HCD_PLATFORM=m
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_UAS=m
CONFIG_USBIP_CORE=m
CONFIG_USBIP_VHCI_HCD=m
CONFIG_USBIP_VHCI_HC_PORTS=8
CONFIG_USBIP_VHCI_NR_HCS=1
CONFIG_USBIP_HOST=m
CONFIG_USB_DWC3=m
CONFIG_USB_DWC3_HOST=y
CONFIG_USB_DWC2=m
CONFIG_USB_DWC2_HOST=y
CONFIG_USB_DWC2_PCI=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_TEST=m
CONFIG_USB_EZUSB_FX2=m
CONFIG_USB_CHAOSKEY=m
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=m
CONFIG_MMC=y
CONFIG_PWRSEQ_EMMC=y
CONFIG_PWRSEQ_SIMPLE=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SPI=m
CONFIG_MMC_MTK=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_PCA963X=m
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_NETDEV=y
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_EM3027=m
CONFIG_RTC_DRV_PCF2123=m
CONFIG_RTC_I2C_AND_SPI=m
CONFIG_RTC_DRV_MT7622=y
CONFIG_DMADEVICES=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y
CONFIG_MTK_HSDMA=y
CONFIG_DMATEST=y
CONFIG_DMA_ENGINE_RAID=y
CONFIG_VIRTIO_MENU=y
CONFIG_STAGING=y
CONFIG_R8712U=m
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_MEDIATEK=y
CONFIG_COMMON_CLK_MT2712=y
CONFIG_COMMON_CLK_MT7622=y
CONFIG_COMMON_CLK_MT7622_ETHSYS=y
CONFIG_COMMON_CLK_MT7622_HIFSYS=y
CONFIG_COMMON_CLK_MT7622_AUDSYS=y
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_CLKSRC_MMIO=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
CONFIG_MTK_TIMER=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_IOMMU_IOVA=y
CONFIG_OF_IOMMU=y
CONFIG_IOMMU_DMA=y
CONFIG_MTK_INFRACFG=y
CONFIG_MTK_PMIC_WRAP=y
CONFIG_MTK_SCPSYS=y
CONFIG_EXTCON=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_KFIFO_BUF=m
CONFIG_IIO_TRIGGERED_BUFFER=m
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_AD799X=m
CONFIG_MEDIATEK_MT6577_AUXADC=y
CONFIG_CCS811=m
CONFIG_IIO_MS_SENSORS_I2C=m
CONFIG_AM2315=m
CONFIG_DHT11=m
CONFIG_HTU21=m
CONFIG_SI7020=m
CONFIG_BH1750=m
CONFIG_TSL4531=m
CONFIG_SENSORS_HMC5843=m
CONFIG_SENSORS_HMC5843_I2C=m
CONFIG_BMP280=m
CONFIG_BMP280_I2C=m
CONFIG_BMP280_SPI=m
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_MEDIATEK=y
CONFIG_IRQCHIP=y
CONFIG_ARM_GIC=y
CONFIG_ARM_GIC_MAX_NR=1
CONFIG_ARM_GIC_V2M=y
CONFIG_ARM_GIC_V3=y
CONFIG_ARM_GIC_V3_ITS=y
CONFIG_ARM_GIC_V3_ITS_PCI=y
CONFIG_PARTITION_PERCPU=y
CONFIG_RESET_CONTROLLER=y
CONFIG_GENERIC_PHY=y
CONFIG_PHY_MTK_TPHY=y
CONFIG_RAS=y
CONFIG_DAX=m
CONFIG_NVMEM=y
CONFIG_MTK_EFUSE=y
CONFIG_PM_OPP=y
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_IOMAP=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_JBD2=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
CONFIG_REISERFS_FS_XATTR=y
CONFIG_JFS_FS=m
CONFIG_XFS_FS=m
CONFIG_BTRFS_FS=m
CONFIG_F2FS_FS=y
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FSNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_AUTOFS4_FS=m
CONFIG_AUTOFS_FS=m
CONFIG_FUSE_FS=m
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
CONFIG_OVERLAY_FS_XINO_AUTO=y
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
CONFIG_CACHEFILES=m
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_UDF_FS=m
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_STRIPPED=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_XATTR=y
CONFIG_MEMFD_CREATE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_LZMA=y
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_CMODE_PRIORITY=y
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UBIFS_FS_FORMAT4=y
CONFIG_CRAMFS=m
CONFIG_CRAMFS_BLOCKDEV=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_FILE_DIRECT=y
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_MINIX_FS=m
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=m
CONFIG_NFS_V4=m
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_CIFS=m
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_UTF8=m
CONFIG_KEYS=y
CONFIG_KEYS_COMPAT=y
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITYFS=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_FORTIFY_SOURCE=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=m
CONFIG_CRYPTO_AKCIPHER=m
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=m
CONFIG_CRYPTO_ECDH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_LZ4=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
CONFIG_CRYPTO_USER_API_AEAD=m
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=m
CONFIG_CRYPTO_DEV_SP_CCP=y
CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
CONFIG_RAID6_PQ=m
CONFIG_BITREVERSE=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC32_SARWATE=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_XXHASH=m
CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=m
CONFIG_ZSTD_COMPRESS=m
CONFIG_ZSTD_DECOMPRESS=m
CONFIG_XZ_DEC=y
CONFIG_LZMA_COMPRESS=y
CONFIG_LZMA_DECOMPRESS=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_DMA_DIRECT_OPS=y
CONFIG_SWIOTLB=y
CONFIG_SGL_ALLOC=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
CONFIG_MPILIB=m
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=m
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_SBITMAP=y
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=7
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
CONFIG_OPTIMIZE_INLINING=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_KERNEL=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=1
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_HAVE_DEBUG_BUGVERBOSE=y
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_TEST_BPF=m
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y

bourne_hlm · October 23, 2019, 8:37am

It seems my EMMC and GPT partition not detected correctly. Missing that log:

[    3.162069] mmc0: new HS200 MMC card at address 0001
[    3.167299] mmcblk mmc0:0001: no of_node; not parsing pinctrl DT
[    3.174505] mmcblk0: mmc0:0001 008G30 7.28 GiB 
[    3.180061] mmcblk0boot0: mmc0:0001 008G30 partition 1 4.00 MiB
[    3.187027] mmcblk0boot1: mmc0:0001 008G30 partition 2 4.00 MiB
[    3.193276] mmcblk0rpmb: mmc0:0001 008G30 partition 3 4.00 MiB, chardev (250:0)
[    3.203089] GPT:Primary header thinks Alt. header is not at the end of the disk.
[    3.210725] GPT:1 != 15269887
[    3.213777] GPT:Alternate GPT header not at the end of the disk.
[    3.219975] GPT:1 != 15269887
[    3.223028] GPT: Use GNU Parted to correct GPT errors.
[    3.228341]  mmcblk0: p1 p2 p3 p4 p5

Should I flash the emmc_singleimage.img first?

   1.First flash the emmc_singleimage.img.
    2.Then flash the preloader preloader_emmc.bin.
    3.Then flash the emmc_openmptcprouter.img.

Could you please provide the uboot log and printenv?

I will rebuild the omr by your kernel config, and try again.

Thank you for your help!

frank-w · October 23, 2019, 8:46am

You could try gdisk to fix gpt-errors…maybe parted

Ivan_Revyakin · October 23, 2019, 9:29am

Short answer: No. This img-file contains these parts:

GPT
ATF
U-boot
Kernel
RootFS

Only 1-3 you need from the file emmc_singleimage.img and these parts fit just in 2048kB (2MB). But! GPT layout of emmc_singleimage.img has only 20M for a ‘boot’ partition:

Number  Start (sector)    End (sector)  Size       Code  Name
   1            1024            1535   256.0 KiB   8300  tee1
   2            1536            2559   512.0 KiB   8300  lk
   3            2560            3583   512.0 KiB   8300  nvram
   4            3584            4095   256.0 KiB   8300  rf
   5            4096           45055   20.0 MiB    8300  boot

The ‘boot’ partition of GPT in our case is a partition contains Firmware (OpenWRT Kernel + RootFS as squashfs) – 4-5 items of the img. So if the Firmware is more 20M (our case) you need to extend ‘boot’, for example, to 64M.

Sure. List 3 below.

BTW you can flash only Firmware part (*squashfs-sysupgrade.bin) via “2. System Load Linux Kernel then write to Flash via TFTP.” instead “b. System Load flashimage then write to Flash via TFTP.”. This case your U-boot env will not rewrite any time you flash new OpenWRT build.

List 3 (U-boot env)

MT7622> printenv
arch=arm
atf_filename=trustzone.bin
baudrate=115200
board=mt7622_evb
board_name=mt7622_evb
boot0=download_setting kernel;tftpboot ${loadaddr} ${kernel_filename}; bootm
boot1=download_setting kernel;tftpboot ${loadaddr} ${kernel_filename};run boot_wr_img
boot10=download_setting flashimage;tftpboot ${loadaddr} ${flashimage_filename};run wr_flashimage
boot11=download_setting gpt;tftpboot ${loadaddr} ${gpt_filename};run wr_gpt
boot2=run boot_rd_img;bootm
boot3=download_setting uboot;tftpboot ${loadaddr} ${uboot_filename};run wr_uboot;invaild_env
boot4=loadb;run wr_uboot;invaild_env
boot5=download_setting atf;tftpboot ${loadaddr} ${atf_filename};run wr_atf
boot6=download_setting preloader;tftpboot ${loadaddr} ${preloader_filename};run wr_pl
boot7=download_setting hdr;tftpboot ${loadaddr} ${hdr_filename};run wr_rom_hdr
boot8=download_setting ctp;tftpboot ${loadaddr} ${ctp_filename};run wr_ctp
boot9=run boot_rd_ctp;boot_to_ctp
boot_rd_ctp=mmc device 0;mmc read ${loadaddr} 0x1000 0xa000
boot_rd_img=mmc device 0;mmc read ${loadaddr} 0x1000 1;image_blks 512;mmc read ${loadaddr} 0x1000 ${img_blks}
boot_wr_img=filesize_check 0x5000000;if test ${filesize_result} = good; then image_blks 512  ${filesize};mmc device 0;mmc write ${loadaddr} 0x1000 0x18000;fi
bootargs=console=ttyS0,115200n1 rootfstype=squashfs earlyprintk block2mtd.block2mtd=/dev/mmcblk0,65536,eMMC,5 mtdparts=eMMC:768k(mbr)ro,512k(uboot),512k(Config),256k(Factory),64M(Kernel),2048M(usrdata)
bootcmd=No
bootdelay=3
bootfile=iverson_uImage
bootmenu_0=1. System Load Linux to SDRAM via TFTP.=run boot0
bootmenu_1=2. System Load Linux Kernel then write to Flash via TFTP.=run boot1
bootmenu_10=b. System Load flashimage then write to Flash via TFTP.=run boot10
bootmenu_11=c. System Load partition table then write to Flash via TFTP.=run boot11
bootmenu_2=3. Boot system code via Flash.=run boot2
bootmenu_3=4. System Load U-Boot then write to Flash via TFTP.=run boot3
bootmenu_4=5. System Load U-Boot then write to Flash via Serial.=run boot4
bootmenu_5=6. System Load ATF then write to Flash via TFTP.=run boot5
bootmenu_6=7. System Load Preloader then write to Flash via TFTP.=run boot6
bootmenu_7=8. System Load ROM header then write to Flash via TFTP.=run boot7
bootmenu_8=9. System Load CTP then write to Flash via TFTP.=run boot8
bootmenu_9=a. System Load CTP then Boot to CTP (via Flash).=run boot9
bootmenu_delay=30
cpu=armv7
ctp_filename=ctp.bin
ethact=mtk_eth
ethaddr=00:0C:E7:11:22:33
fdt_high=0x6c000000
flashimage_filename=flashimage.bin
gpt_filename=GPT_EMMC
hdr_filename=hdr.binary
invaild_env=no
ipaddr=192.168.100.1
kernel_filename=openwrt-mediatek-mt7622-BPI-R64-initramfs-kernel.bin
loadaddr=0x4007FF28
preloader_filename=preloader_fpga7622_64_ldvt.bin
serverip=192.168.100.2
soc=mt7622
stderr=serial
stdin=serial
stdout=serial
uboot_filename=u-boot-mtk.bin
vendor=mediatek
wr_atf=filesize_check 0x40000;if test ${filesize_result} = good; then mmc device 0;mmc write ${loadaddr} 0x400 0x200;fi
wr_ctp=filesize_check 0x1400000;if test ${filesize_result} = good; then ctp_check;if test ${ctp_result} = good; then mmc device 0;mmc write ${loadaddr} 0x1000 0xa000;reset; fi;fi
wr_flashimage=filesize_check 0x5000000;if test ${filesize_result} = good; then mmc device 0;mmc write ${loadaddr} 0x0 0x18000;fi
wr_gpt=filesize_check 0x4400;if test ${filesize_result} = good; then mmc device 0;mmc write ${loadaddr} 0x0 0x22;fi
wr_pl=filesize_check 0x40000;if test ${filesize_result} = good; then mmc device 0; mmc write ${loadaddr} 0x0 0x200 emmc_preloader;fi
wr_rom_hdr=filesize_check 0xA000;if test ${filesize_result} = good; then mmc device 0;mmc write ${loadaddr} 0x0 0x50;fi
wr_uboot=filesize_check 0x80000;if test ${filesize_result} = good; then mmc device 0;mmc write ${loadaddr} 0x600 0x400;fi

Environment size: 3912/4092 bytes

frank-w · October 23, 2019, 10:22am

Does this mean you do not need head0/1 and sd-preloader? In my test i need these 3 to boot into uboot from emmc

Ivan_Revyakin · October 23, 2019, 12:12pm

Well… this list is my assumption. But I guess the header and the preloader you mean are contained iside other file – “preloader_emmc.bin”, and it’s flashed once, regardless of the main img.

Here is “preloader_emmc.bin” ( eMMC preloader):

As I understand if we look at the dev dir inside linux, “preloader_emmc.bin” is flashed to the “mmcblk0boot0”, and “emmc_singleimage.img” is flashed to the “mmcblk0”:

root@OpenWrt:/# ll /dev/mmcblk0*
brw-------    1 root     root      179,   0 Jan  1 23:33 /dev/mmcblk0
brw-------    1 root     root      179,   8 Jan  1 23:33 /dev/mmcblk0boot0
brw-------    1 root     root      179,  16 Jan  1 23:33 /dev/mmcblk0boot1
brw-------    1 root     root      179,   1 Jan  1 23:33 /dev/mmcblk0p1
brw-------    1 root     root      179,   2 Jan  1 23:33 /dev/mmcblk0p2
brw-------    1 root     root      179,   3 Jan  1 23:33 /dev/mmcblk0p3
brw-------    1 root     root      179,   4 Jan  1 23:33 /dev/mmcblk0p4
brw-------    1 root     root      179,   5 Jan  1 23:33 /dev/mmcblk0p5
crw-------    1 root     root      250,   0 Jan  1 23:33 /dev/mmcblk0rpmb

frank-w · October 23, 2019, 12:28pm

Then the other headers are maybe in the single image because they have to be on user-partition (mmcblkx) not boot0. Ok,just wondered about…back to topic

bourne_hlm · October 23, 2019, 12:37pm

Where is your kernel .config coming from? ./build_dir/target-aarch64_cortex-a53_musl/linux-mediatek_mt7622/linux-4.19.72/.config? Could you please share the original kernel .config? It seems your .config file is not complete, it’s very difficult to do merge.

frank-w · October 23, 2019, 1:02pm

Drop lines beginning with #,append to yours and use it with oldconfig (don’t know how thos can be done in openwrt). In worst case us the merged file as defconfig

Ivan_Revyakin · October 23, 2019, 1:02pm

Here you are (./build_dir/target-aarch64_cortex-a53_musl/linux-mediatek_mt7622/linux-4.19.72/.config). Is this file you need? I’m still not so familiar with it as I want…

Ivan_Revyakin · October 23, 2019, 2:37pm

I have made an experiment . I erased step by step parts of img (dd if=/dev/zero … conv=notrunc) and wrote instead of them meaningful files. So that is I know about mmcblk0 (bs=1k):

start   size   partition (name)     Purpose

0         17                        GPT layout
18       495                        - nothing -
512      256   mmcblk0p1 (tee1)     ATF
768      512   mmcblk0p2 (lk)       U-boot
1280     512   mmcblk0p3 (nvram)    U-boot env
1792     256   mmcblk0p4 (rf)       - nothing -
2048   20480   mmcblk0p5 (boot)     Kernel + squashfs RootFS

bourne_hlm · October 28, 2019, 2:33pm

I can build and load the omr image to R64 now. Must select three items in the kernel menuconfig:

"Device Drivers"-->"Memory Technology Device (MTD) support"-->"Command line partition table parsing"
"Device Drivers"-->"Memory Technology Device (MTD) support""Self-contained MTD device drivers"-->"MTD using block device"
"Device Drivers"-->"MMC/SD/SDIO card suport"->"MMC block device driver"

But it seems the Soc wifi not working, it work with the emmc_singleimage.img image.

Ivan_Revyakin · October 28, 2019, 2:50pm

I think you need to add MT7615 module:

From this:

frank-w · October 28, 2019, 3:01pm

The mt7615 wifi was imho dropped in hw rev 1.x due to heat and power consumption. Was not working before because driver has not supported it.

bourne_hlm · October 28, 2019, 3:32pm

The mt7622 Soc included wifi chip is not mt7615e. My R64 board is V1.1, and the LEDE in emmc_singleimage.img image included the mt7622 onboard wifi driver.

frank-w · October 28, 2019, 4:24pm

mt7622 wifi is working on lede? Have not seen the driver till now…

bourne_hlm · October 29, 2019, 2:13am

Yes, the mt7622 wifi is working on the emmc_singleimage.img, it’s based on LEDE.

ifconfig
ra0       Link encap:Ethernet  HWaddr 00:0C:43:26:60:58
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:335 errors:170 dropped:0 overruns:0 frame:0
          TX packets:132 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:20078 (19.6 KiB)  TX bytes:12359 (12.0 KiB)
          Interrupt:246

root@LEDE:/# iwconfig
gre0      no wir[  264.147116] mtk_do_priv_ioctl ioctl 35585 is not supportedeless extensions
.

wds0      R[  264.153744] mtk_do_priv_ioctl ioctl 35585 is not supportedTWIFI SoftAP  ESSID:"MTK_AP1"
          Mode:Master  Channel=6  Access Point: 00:0C:43:26:60:58
          Bit Rate=1 Mb/s

sit0      no wireless extensions.

lo        no wireless extensions.

wds1      RTWIFI SoftAP  ESSID:""
          Mode:Master  Channel=6  Access Point: Not-Associated
          Bit Rate:1 Mb/s

apcli0    RTWIFI SoftAP  ESSID:""
          Mode:Managed  Channel=6  Access Point: Not-Associated
          Bit Rate:7 Mb/s

eth1      no wireless extensions.

wds3      RTWIFI SoftAP  ESSID:""
          Mode:Master  Channel=6  Access Point: Not-Associated
          Bit Rate:1 Mb/s

ra0       RTWIFI SoftAP  ESSID:"MTK_AP1"
          Mode:Master  Channel=6  Access Point: 00:0C:43:26:60:58
          Bit Rate=288 Mb/s

br-lan    no wireless extensions.

gretap0   no wireless extensions.

eth0      no wireless extensions.

wds2      RTWIFI SoftAP  ESSID:""
          Mode:Master  Channel=6  Access Point: Not-Associated
          Bit Rate:1 Mb/s

root@LEDE:/# opkg list | grep mt
kmod-ata-ahci-mtk - 4.4.177-1
kmod-mt_wifi - 4.4.177+TEST-1
kmod-sdhci-mtk - 4.4.177-1
luci-app-mtk - git-19.192.23199-2be7d1b-1
memtester - 4.3.0-1
mtd - 21
mtk-base-files - 1-r0-aec93540
mtk_factory_rw - 1-r0-aec93540
mtkhnat_util - 1-r0-aec93540
mtkiappd - 1

root@LEDE:/# lsmod | grep mt
ahci_mtk                3008  0
libahci                20891  2 ahci_mtk,libahci_platform
libahci_platform        6530  1 ahci_mtk
libata                138296  3 ahci_mtk,libahci_platform,libahci
mt_whnat               60089  0
mt_wifi              4014425  2 mt_whnat
mtkhnat                54038  2 mt_whnat,mt_wifi
usbcore               154280  9 usb_storage,xhci_mtk,xhci_plat_hcd,xhci_pci,xhci_hcd,ohci_platform,ohci_hcd,ehci_platform,ehci_hcd
xhci_hcd              111422  3 xhci_mtk,xhci_plat_hcd,xhci_pci
xhci_mtk                7872  0

Ivan_Revyakin · October 29, 2019, 7:15am

@bourne_hlm, I think this is the subject of a new topic.

frank-w · October 29, 2019, 8:24am

Sorry my fault…created a new topic here

bourne_hlm · December 1, 2019, 12:01pm

How to mount the 2048M(usrdata) mtd partition? I try to use mount /dev/mtdblock8 /usrdata, but failed.

mount /dev/mtdblock8 /usrdata
NTFS signature is missing.
Failed to mount '/dev/mtdblock8': Invalid argument
The device '/dev/mtdblock8' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
NTFS signature is missing.
Failed to mount '/dev/mtdblock8': Invalid argument
The device '/dev/mtdblock8' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
mount: mounting /dev/mtdblock8 on /usrdata failed: Invalid argument

[   17.402717] 6 cmdlinepart partitions found on MTD device eMMC
[   17.408638] Creating 6 MTD partitions on "eMMC":
[   17.413413] 0x000000000000-0x0000000c0000 : "mbr"
[   17.418702] 0x0000000c0000-0x000000140000 : "uboot"
[   17.424108] 0x000000140000-0x0000001c0000 : "Config"
[   17.429573] 0x0000001c0000-0x000000200000 : "Factory"
[   17.435124] 0x000000200000-0x000004200000 : "Kernel"
[   17.441753] 2 fit-fw partitions found on MTD device Kernel
[   17.447409] 0x000000200000-0x000000520000 : "kernel"
[   17.452930] 0x000000519db0-0x000004200000 : "rootfs"
[   17.458379] mtd: device 6 (rootfs) set to be root filesystem
[   17.464284] 1 squashfs-split partitions found on MTD device rootfs
[   17.470667] 0x0000025c0000-0x000004200000 : "rootfs_data"
[   17.476603] 0x000004200000-0x000084200000 : "usrdata"
[   17.482153] block2mtd: mtd0: [eMMC] erase_size = 64KiB [65536]
[   17.488356] rtc_mt7622 10212800.rtc: setting system clock to 2000-01-01 00:00:15 UTC (946684815)
[   17.500980] VFS: Mounted root (squashfs filesystem) readonly on device 31:6.
[   17.510015] devtmpfs: mounted
[   17.513218] Freeing unused kernel memory: 320K

~# cat /proc/partitions 
major minor  #blocks  name

 179        0    7634944 mmcblk0
 179        1        256 mmcblk0p1
 179        2        512 mmcblk0p2
 179        3        512 mmcblk0p3
 179        4        256 mmcblk0p4
 179        5      65536 mmcblk0p5
  31        0        768 mtdblock0
  31        1        512 mtdblock1
  31        2        512 mtdblock2
  31        3        256 mtdblock3
  31        4      65536 mtdblock4
  31        5       3200 mtdblock5
  31        6      62360 mtdblock6
  31        7      28928 mtdblock7
  31        8    2097152 mtdblock8

The rootfs_data mtd partition is too small, only 28MB if use 64MB boot partition. The eMMC is 8G for R64, so i want to use most of eMMC space.