frank-w
(Frank W.)
November 28, 2017, 1:33pm
11
I’ve uploaded the actual 4.4.70 (my config)…
fwu.config (132,9 KB)
v1.2.1 (Nov 23, 2017),including mt76x2/x3 wireless driver
Bootloader (u-boot): https://www.file-upload.net/download-12838584/BOOTLOADER-bpi-r2.tgz.html
BOOT-Partition (uImage): https://www.file-upload.net/download-12838580/BPI-BOOT-bpi-r2.tgz.html
ROOT-Partition (modules): https://www.file-upload.net/download-12838589/4.4.70-BPI-R2-Kernel.tgz.html
to download use the blue button with the cloud-icon…the other are advertisements
1 Like
garywang
(gary)
November 29, 2017, 3:09am
12
Build the latest BSP on host, and run below command:
Insert your SD card to host
cd SD
bpi-update -c bpi-r2.conf -d /dev/sdx
where the /dev/sdx is the disk of your SD
BenB
(Benoit)
December 1, 2017, 5:13pm
13
Could you deliver this image in google drive?
1 Like
Mariano
(Mariano Marinas)
December 2, 2017, 9:53pm
14
google drive image, please
frank-w
(Frank W.)
December 3, 2017, 5:52pm
15
2 Likes
Dima
(Dima)
December 6, 2017, 12:44pm
16
In current version bluetooth doesn’t work correct with device LE.
Tested by gatttool - Connection refued.
Also, tried hcitool lecc. It seems connected, but can’t disconnect.
Is it a way to make it works correctly?
ceeeru
December 17, 2017, 6:51am
17
Hello friends!
How can enter to u-boot prompt?
It is a simple terminal?
Thanks
frank-w
(Frank W.)
December 17, 2017, 7:05am
18
You have to use debug-uart ( http://www.fw-web.de/dokuwiki/doku.php?id=en:bpi-r2:debug-uart )
Before kernel is loaded you see a menu…take the last menuitem
1 Like
ceeeru
January 3, 2018, 8:08pm
19
Thank You Frank-W!
Nice work!
Hi i have some problems with getting emmc boot working i have serial console on windows machine using putty and it boots the lede test image off sd but it dosent stop on bpi-r2 in uboot but continues past any interaction from keboard it starts to recive garbage in the console reboot it boots fine and i can see the bpi-r2 line but folowed by some more like this
In: serial
Out: serial
Err: serial
Net: Eth0
Uip activated
Hit any key to stop autoboot: 0
BPI-R2>
BPI-R2>
BPI-R2>
BPI-R2> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Bo
frank-w
(Frank W.)
January 5, 2018, 11:27am
21
which chipset of usb2serial, which application do you use with which settings?
please format your output with code-button (</>)
Hi Frank
i use ftdi baudrate 115200 8n1 i use putty on windows 10 and i get if i press any key on my keyboard it starts to send more i have tryed with backspace but dosent work do i have to use console under linux
In: serial
Out: serial
Err: serial
Net: Eth0
Uip activated
Hit any key to stop autoboot: 0
BPI-R2>
BPI-R2>
BPI-R2>
BPI-R2> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-BoPreformatted text
In: serial
Out: serial
Err: serial
Net: Eth0
Uip activated
Hit any key to stop autoboot: 0
BPI-R2>
BPI-R2>
BPI-R2>
BPI-R2> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-Boot 2014.04-rc1 (Sep 05 23>>>> U-BoPreformatted text
frank-w
(Frank W.)
January 5, 2018, 11:38am
24
select your output from serial console and press the </>-button…you can also edit your posts
which chipset? there are known problems with profilic-chips
probaly profilic and i dosent matter if i press </> it still looks like in previus post
the lede image is 907 maby i have the vrong one
Maby i have connected it wrong on the db9 plug
frank-w
(Frank W.)
January 5, 2018, 11:56am
28
db9? an old COM-Port? attention, this may have 12V!
it is a usb to db9 serial adapter
frank-w
(Frank W.)
January 5, 2018, 12:22pm
30
can you turn off flow-control in putty?