@garywang i had to split the Log… Thanks log1-1 (274,8 KB) log1-2 (190,5 KB) log1-6 (174,1 KB) log1-4 (199,2 KB) log1-5 (194,9 KB) log1-3 (220,4 KB)
i started from scratch, taken the config from here, changed only to hardfloat, choose luci, fdisk and blkid as packages… worked
Hello Guys,
is it right that i cannot mount everything without for example compiling “kmod-fs-ext4” for ext4 ?
I need the packages for compiling, only errors if i compile more than the basic things…
May I get little help…Boot Error after I enable some pci-e wireless card\
[ 17.259734] lib80211: common routines for IEEE802.11 drivers\
[ 17.270368] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)\
[ 17.277647] ctnetlink v0.93: registering with nfnetlink.\
[ 17.299797] Bluetooth: RFCOMM TTY layer initialized\
[ 17.304652] Bluetooth: RFCOMM socket layer initialized\
[ 17.309834] Bluetooth: RFCOMM ver 1.11\
[ 17.319927] xt_time: kernel timezone is -0000\
[ 17.327191] cfg80211: exports duplicate symbol __cfg80211_alloc_event_skb (owned by kernel)\
[ 17.415680] Error: Driver 'gpio-keys' is already registered, aborting...\
[ 17.538331] PPP generic driver version 2.4.2\
[ 17.543281] NET: Registered protocol family 24\
[ 17.550594] cfg80211: exports duplicate symbol __cfg80211_alloc_event_skb (owned by kernel)\
[ 17.655686] Error: Driver 'gpio-keys' is already registered, aborting...\
[ 17.778980] cfg80211: exports duplicate symbol __cfg80211_alloc_event_skb (owned by kernel)\
[ 17.895692] Error: Driver 'gpio-keys' is already registered, aborting...\
[ 18.015002] kmodloader: 18 modules could not be probed\
[ 18.020136] kmodloader: dependency not loaded cfg80211\
[ 18.025314] kmodloader: - ath - 1\
[ 18.028626] kmodloader: dependency not loaded mac80211\
[ 18.033746] kmodloader: dependency not loaded ath9k_hw\
[ 18.038885] kmodloader: dependency not loaded ath9k_common\
[ 18.044351] kmodloader: dependency not loaded cfg80211\
[ 18.049505] kmodloader: dependency not loaded ath\
[ 18.054195] kmodloader: - ath9k - 5\
[ 18.057697] kmodloader: dependency not loaded ath9k_hw\
[ 18.062816] kmodloader: dependency not loaded cfg80211\
[ 18.067951] kmodloader: dependency not loaded ath\
[ 18.072640] kmodloader: - ath9k_common - 3\
[ 18.076744] kmodloader: dependency not loaded ath\
[ 18.081433] kmodloader: - ath9k_hw - 1\
[ 18.085192] kmodloader: dependency not loaded mac80211\
[ 18.090315] kmodloader: dependency not loaded cfg80211\
[ 18.095453] kmodloader: - b43 - 2\
[ 18.098763] kmodloader: dependency not loaded mac80211\
[ 18.103884] kmodloader: dependency not loaded cfg80211\
[ 18.109020] kmodloader: - b43legacy - 2\
[ 18.112848] kmodloader: dependency not loaded cfg80211\
[ 18.117987] kmodloader: - brcmfmac - 1\
[ 18.121730] kmodloader: dependency not loaded mac80211\
[ 18.126866] kmodloader: dependency not loaded ath\
[ 18.131554] kmodloader: dependency not loaded cfg80211\
[ 18.136691] kmodloader: - carl9170 - 3\
[ 18.140433] kmodloader: - cfg80211 - 0\
[ 18.144176] kmodloader: - gpio-button-hotplug - 0\
[ 18.148886] kmodloader: dependency not loaded iwlegacy\
[ 18.154006] kmodloader: dependency not loaded mac80211\
[ 18.159144] kmodloader: dependency not loaded cfg80211\
[ 18.164264] kmodloader: - iwl3945 - 3\
[ 18.167935] kmodloader: dependency not loaded iwlegacy\
[ 18.173055] kmodloader: dependency not loaded mac80211\
[ 18.178192] kmodloader: dependency not loaded cfg80211\
[ 18.183311] kmodloader: - iwl4965 - 3\
[ 18.186981] kmodloader: dependency not loaded mac80211\
[ 18.192100] kmodloader: dependency not loaded iwlwifi\
[ 18.197151] kmodloader: dependency not loaded cfg80211\
[ 18.202270] kmodloader: - iwldvm - 3\
[ 18.205855] kmodloader: dependency not loaded mac80211\
[ 18.210974] kmodloader: dependency not loaded cfg80211\
[ 18.216110] kmodloader: - iwlegacy - 2\
[ 18.219852] kmodloader: dependency not loaded iwlwifi\
[ 18.224901] kmodloader: dependency not loaded mac80211\
[ 18.230021] kmodloader: dependency not loaded cfg80211\
[ 18.235157] kmodloader: - iwlmvm - 3\
[ 18.238727] kmodloader: dependency not loaded cfg80211\
[ 18.243844] kmodloader: - iwlwifi - 1\
[ 18.247515] kmodloader: dependency not loaded cfg80211\
[ 18.252634] kmodloader: - mac80211 - 1\
[ 18.256394] kmodloader: dependency not loaded mac80211\
[ 18.261513] kmodloader: dependency not loaded cfg80211\
[ 18.266649] kmodloader: - mt7601u - 2\
[ 21.611099] mtk_soc_eth 1b100000.ethernet eth0: rx pause enabled, tx pause enabled\
[ 21.615730] br-lan: port 1(lan0) entered blocking state\
[ 21.615749] br-lan: port 1(lan0) entered disabled state\
[ 21.616201] device lan0 entered promiscuous mode\
[ 21.616204] device eth0 entered promiscuous modeAs far as i see you need at least mac80211 and cfg80211
dependency not loaded mac80211I tried to fix the problem of this page(How to use mini PCIe to connect to RTL8188CE?). The system could load the kernel module on the PCI wireless network card, but I encountered the following questions. And the ifconfig command still can’t see the wireless network interface.
Hello, why we cant use /etc/config/wireless for wifi ?
Internal wifi-driver is activated via wmt-tools…mostly this happens after normal network-config is loaded…
in other words: At time network-config is loaded/activated, wlan0/ap0 does not exist because an other script must be executed first
Thanks Frank, which script do i need to load the module ? I have a wireless config like
config wifi-device 'ap0'
option type 'nl80211'
option hwmode '11g'
option path 'platform/ath9k'
option country 'GR'
option distance '50'
option txpower '20'
option channel 'auto'
config wifi-iface
option device 'ap0'
option ssid 'bpi'
# option wmm '0'
option key 'bpi'
option network 'ap0'
# option wpa_disable_eapol_key_retries '1'
option mode 'ap'
# option bssid 'root'
option encryption 'none'
option network 'ap0'
and after
wifi config
i try to start with
wifi
but error
ap0(nl80211): Interface type not supported ap0(nl80211): Interface type not supported
I don’t know the name in openwrt,but driver is same as in ubuntu/debian…in official ubuntu its name is imho wifi.sh…
the script calls binaries wmt_loader and stp_uart_launcher which together creating ap0-device
so to be clear, i don’t forget to kompile some Modules, i need only the script… to manually enter
wmt_loader
stp_uart_launcher -p /etc/firmware &
sleep 2
echo 1 > /dev/wmtWifi
exit 0
will not help, do i understand it right ?
I know wifi-driver is same as in ubuntu so ap0 needs to be created the same way…if you do it manually or run the script that should be exist and do the same is equal…after that you can apply your network-config…remember to restart daemons (hostapd,dnsmasq,…) after network config
Btw. Echo does not create ap0 but wlan0 = client-mode
i dont use hostapd/dnsmasq… I have the wpad full installed and use odhcpd (isc-server in ubuntu) and wifi for hostapd
sorry, i only copied… for ap0 i used echo A …
Did someone find this script ?
Guys, i really only wanted a router as an AP and a small nas for syncing some Data… I am now trying about two Months to get working this AP, don’t now what is missing to start wifi to work.
ifconfig
ap0 Link encap:Ethernet HWaddr 02:08:22:88:E0:FB
inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::8:22ff:fe88:e0fb/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:1240 (1.2 KiB)
br-lan Link encap:Ethernet HWaddr AE:74:13:11:5C:DA
inet addr:192.168.1.8 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::ac74:13ff:fe11:5cda/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:416 errors:0 dropped:0 overruns:0 frame:0
TX packets:343 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:41667 (40.6 KiB) TX bytes:104684 (102.2 KiB)
eth0 Link encap:Ethernet HWaddr AE:74:13:11:5C:DA
inet6 addr: fe80::ac74:13ff:fe11:5cda/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:432 errors:0 dropped:0 overruns:0 frame:0
TX packets:360 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:50479 (49.2 KiB) TX bytes:109320 (106.7 KiB)
Interrupt:211
eth1 Link encap:Ethernet HWaddr C6:A9:C5:E0:EE:B1
inet6 addr: fe80::c4a9:c5ff:fee0:eeb1/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:846 (846.0 B)
Interrupt:211
lan0 Link encap:Ethernet HWaddr AE:74:13:11:5C:DA
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lan1 Link encap:Ethernet HWaddr AE:74:13:11:5C:DA
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lan2 Link encap:Ethernet HWaddr AE:74:13:11:5C:DA
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:430 errors:0 dropped:0 overruns:0 frame:0
TX packets:343 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:42627 (41.6 KiB) TX bytes:104684 (102.2 KiB)
lan3 Link encap:Ethernet HWaddr AE:74:13:11:5C:DA
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:16 errors:0 dropped:0 overruns:0 frame:0
TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:1445 (1.4 KiB) TX bytes:1445 (1.4 KiB)
wan Link encap:Ethernet HWaddr C6:A9:C5:E0:EE:B1
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wireless
config wifi-iface
option device 'ap0'
option ssid 'bpi'
option key 'bpi'
option network 'ap0'
option mode 'ap'
option encryption 'none'
option network 'ap0'
config wifi-device 'ap0'
option type 'nl80211'
option phy 'phy0'
option hwmode '11g'
option txpower '20'
option country 'de'
option channel '3'
wifi
ap0(nl80211): Interface type not supported
ap0(nl80211): Interface type not supported
if somebody has a solution , this would be very nice… I have wpad full installed, not wpad-mini, means i dont have a hostapd…
You can try to find duplicate symbols and delete them from compat-wireless and repack them into tar.xz packages. But I’m not sure if I really solve the problem(Similar Problem )
Excuse me, did anyone help me to answer the question that my image cannot be brushed on the emmc that comes with the development board
can you please give more information?
- which board
- which image
- which steps have you done for emmc-flash
- error-messages / issue?
The development board is bpi-r2 v1.2, and the image was downloaded by colleagues on the official website. Now, it can only start with SD card.Cannot brush the image at the end of the emmc onto the development board.I just wanted to know how to do it
at least Second question was not answered…which image. is thos image usable for emmc? Maybe it has to be modified…