good news , we have finished BPI-BE1900 wifi7 Module design ,and do this smaple now ,will ready soon.
4 Likes
how many antennas does that have?
1 Like
it have 14 antennas on BE1900
Good to see it finally made it to production. Do you have preliminary figures for radio noise? Or, at least, is it supposed to be better than the BE14 in this regard?
I’m ready to order 
How about the power consumption?
In compare to be14 too.
I asked ChatGPT this question:
It gave me this table:
Is that right?
If that’s correct, an average single-family household would only need this during party situations.
I looked at the page of GL.inet. The “big” router is the Flint 3 GL-BE9300 and small one is Slate 7 GL-BE3600. I think this is a good orientation … (sadly it is Qualcomm based)
That’s why I’m interested in the power consumption. If the BE19 didn’t consume more power at idle than the AW7990, I’d be on board! But I guess this train is leaving without me.
Nevertheless this does not mean that some people can’t have fun with it! 
What’s the max radio power per band? (dbm)
I have two wireless APs at home, one in the middle of the house and one near the balcony.
In the middle of the house, in addition to the WiFi AP, there are also an VDSL, a SFP+ Switch, an x79 host(pve1), an x99 host(pve2), and an NAT host (Intel N3350 with 1Gb Ethernet & 1Gb SFP).
There is an IPCam outside the door of the house, which is connected to the WiFi AP in the middle of the house. Currently, the two WiFi APs uses TP-Link C7(V4 & V5).
I have a dream.
I hope that both WiFi APs will use SFP+ to provide WiFi 7, the NAT Host connect to the Switch with SFP+, and add a new Nvme SSD NAS(Nvme SSD & SSD on x79 host now).
I hope that the NAT host can collect the client connection information of the WiFi AP and the port information of the switch.
I hope BPI-R4 can become the next generation infrastructure services platform, but…
Currently, I put BPI-R4 + BE14 in the same location, and its signal strength cannot reach outside the door.
I used my phone to connect to the BPI-R4 + BE14’s WiFi to watch LangLive(Taiwanese version of TikTok), but the WiFi will disconnect and the screen froze.
Currently, my laptop uses Debian 12 with RTL8852CE PCIe 802.11ax, and NetworkManager(1.42.0) does not seem to support 6GHz yet.
I hope that BPI-R4 will be strong and stable enough to realize my dream step by step.
I hope the BE19000 signal strength and stability can be better, and I also hope the BPI-R4 PRO is not too expensive.