Banana pi BPI-M2 Ultra/BPI-M2 Berry new image:Ubuntu-16.04-mate-desktop-beta-bpi-m2u-sd-emmc-2017-07-10

2017-07-10-ubuntu-16.04-mate-desktop-beta-bpi-m2u-sd-emmc.img.zip

  1. based on ubuntu 16.04.2 LTS Mate Desktop
  2. support BPI-M2 Ultra & BPI-M2 Berry kernel 3.10.65
  3. username & password: pi/bananapi , root/bananapi
  4. support LCD 7"
  5. support LCD 5"
  6. support HDMI 1080P & 480P & 720P (default)
  7. support GMAC
  8. support WIFI
  9. support BT (with bluetoothctl can setup)
  10. support SATA
  11. support UART (default set 2 pin mode for /dev/ttyS2)
  12. support eMMC (support boot from eMMC)
  13. support Battery (BPI-M2 Ultra only)
  14. support IR (getevent can test, BPI-M2 Ultra only)
  15. support touch screen (can control desktop or getevent to test) 15 support power key (getevent can test)
  16. support OTG & adbd (default off)
  17. support CAMERA ov5640 (guvcview / cap / ffmpeg-3.2.1 support video H.264 hw encode)
  18. support uEnv.txt to fatload uImage
  19. support bpi-bootsel to set LCD7" / LCD5" / HDMI (720P & 1080P & 480P)
  20. support bpi-copy to write SD/eMMC with img.zip file
  21. support video play 1080p with vdpau (mpv)
  22. support wiringpi 2.44 (https://github.com/BPI-SINOVOIP/WiringPi, thanks to http://wiringpi.com/ & https://github.com/WiringPi/WiringPi)
  23. support rpi.gpio 0.6.3 for python (https://github.com/BPI-SINOVOIP/RPi.GPIO, thanks to https://sourceforge.net/projects/raspberry-gpio-python/)
  24. Thanks for linux-sunxi community (http://linux-sunxi.org/)
  25. Special thanks for Alex support with camera functions (https://github.com/avafinger)

Google Drive:

baidu cloud:

http://pan.baidu.com/s/1cjd8SY

MD5: b10a243031f5c819220857ff3c2f61a2

FILESIZE: 1693544540 (~1616MB)

UNPACK: 7456MB (eMMC size)

cool, downloading the new version! Thanks for the great work!

will it run on BPI-M2 ?

WiringPi : gpio readall
Oops - unable to determine board type… model: 28

Would be nice if someone could fix this error.

Ooops… Still kernel 3.10.65? No support for kernel 4.x?

Would you please describe step by step how to get otg working? Btw thank you for uart. Works perfect!