BPI-R4 Lite Ubuntu Image

[brucerry (bruce)]

@brucerry

BPI-R4L> run useusb
USB is stopped. Please issue 'usb start' first.
starting USB...
xhci-mtk xhci@11200000: hcd: 0x0000000011200000, ippc: 0x0000000011203e00
xhci-mtk xhci@11200000: ports disabled mask: u3p-0x1, u2p-0x0
xhci-mtk xhci@11200000: u2p:1, u3p:1
Starting the controller
USB XHCI 1.20
Bus xhci@11200000: 2 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
** Bad device specification usb 0 **
Couldn't find partition usb 0:1
BPI-R4L>

root@bpi-r4:~# fdisk -l | tail
Disk /dev/sda: 117.19 GiB, 125829120000 bytes, 245760000 sectors
Disk model: USB DISK 3.0
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x074409f4

Device     Boot  Start       End   Sectors  Size Id Type
/dev/sda1       292480 245759999 245467520  117G  c W95 FAT32 (LBA)
root@bpi-r4:~#

Does this reflect my r4lite is using USB2.0?

BPI-R4L> usb tree
USB device tree:
  1  Hub (5 Gb/s, 0mA)
  |  U-Boot XHCI Host Controller
  |
  +-2  Hub (480 Mb/s, 0mA)
       VIA Labs, Inc.          USB2.0 Hub

BPI-R4L>

Officially saying: