Banana Pi BPI-R4 Wifi 7 router board with MediaTek MT7988A (Filogic 880),4G RAM and 8G eMMC

[M10 (M)]

Any news about wifi module ?

[oli]

is there any kind of roadmap/status/overview whats currently in wip and whats done? e.g. wifi, antennas, porting to kernel 6.9, etc.?

[kvic]

About measured memory bandwidth on R4. I did some research and safe to conclude R4 is good here.

50-ish to 60-ish percent real bandwidth of the theoretical maximum is about the norm on ARM SBCs. For example, look at Raspberry Pi 4 and etc here: https://forums.raspberrypi.com/viewtopic.php?t=271121&sid=f771d50be99d55c700cd6aa9a14f36e1

So nothing to do with the memory traces. Nothing to worry about here.

[Lee-7723]

Any news about wifi module ?

Take a look at here → Banana Pi BPI-R4 BPI-BE14 Wi-Fi7 NIC module - #52 by Lee-7723

[zachi40 (aa bb)]

Hey friends I recently purchased the WLE600VX (https://www.aliexpress.com/item/1005006980760083.html) wifi card to connect it to my router (banana pi bpi-r4) and the router fails to recognize it. when I run the command “lspci” the output return empty. I tried to install the following packages also without success: ath10k-firmware-qca988x kmod-ath10k.

Has anyone managed to solve this case by any chance?

[oli]

they are incompatible, see also BPI R4 doesnt detect 2nd PCI card [solved] - #14 by oli

[frank-w]

Please search in forum and do not use general threads for specific peripheral questions.

Ath cards are known not working

[quartis]

hey. version with 1xstp and 1x2.5gbe with poe is avaible in shop? or must solder yourself?

[sinovoip (bpi team)]

you can contact [email protected] ask support

[fengaiyu]

How to setup or inplement the AFC(Automated Frequency Coordination) in 6GHz? Hardware:Banana pi R4+WiFi7:BPI-R4-NIC-BE14 We have already completed the AFC DUT test Harness on the computer(6 GHz AFC Resources | Wi-Fi Alliance). Is there any information about AFC?

[Avamander]

AFC requires, well, automated frequency coordination. This entails something like running afcd (having it connect to the coordinating organization) and then hostapd (or equivalent) with its support.

I’m not aware of any publicly usable implementations of the former just yet. You have to use the low limits that are allowed without AFC.

[fengaiyu]

Thanks,your answer is useful to me. Maybe the “afcd” is what i want. Like these features:[PATCH v7 1/4] hostapd: afcd: add AFC daemon support (Linux Host AP)

[kvic]

FYI. A different vendor’s board has similar, if not exactly same, traces between MT7988a and memory chips.

AsiaRF Wifi 7 module

[AA] One member asked about the ‘straight traces’ between SoC and memory chips. This board has the same pattern as BPI R4. Hence, I conclude it’s likely from reference design/recommended design by MediaTek. So indeed nothing to worry about.

[c3sk8]

Atheros AR5BXB63 recycled here…ok, It Is really old, but works fine… Any info about the official wifi7 nic realase?

[Lorem_amicus (Michael Fischer)]

OpenWrt One/AP-24.XY is an upcoming router board developed by OpenWrt and Banana Pi

Did you talking about the wifi 7 modul for BPI-R4?: https://de.aliexpress.com/item/1005007223137654.html But please, there are other chats for the wifi 7 NIC BE14 and BPI-R4: or:

[luke-meshii (Luke Slark)]

Just putting this out there as cannot find much information on it, other than SINOVOIP’s getting started wiki.

Has anyone managed to get a Quectel RM520N-GL module working in CN16 M.2 B slot?

Device does not appear to initialize upon boot, i’m not wanting to use an outdated verison of OpenWRT (sinivoip BPI-R4 images) due to not being able to install new drivers/packages etc…

[frank-w]

please create own thread for special 3rd party hardware…this thread is about 355 posts log…so the answer gets lost for all who have same problem

[nezar_taima]

I have two 5G modules from quectel (RM520N-GL & RM520N-EU), both works okay inside R4 board. BTW, using mainline openwrt not official image.

[Karasik]

Do SFPs (I have DFP-34X-2C3) work in OpenWRT snapshot? I can’t log into the web interface, build 21.02 works without problems.

ethtool is the same in both versions:

Settings for eth2:
        Supported ports: [ FIBRE ]
        Supported link modes:   1000baseX/Full
        Supported pause frame use: Symmetric Receive-only
        Supports auto-negotiation: Yes
        Supported FEC modes: Not reported
        Advertised link modes:  1000baseX/Full
        Advertised pause frame use: Symmetric Receive-only
        Advertised auto-negotiation: Yes
        Advertised FEC modes: Not reported
        Speed: Unknown!
        Duplex: Unknown! (255)
        Port: FIBRE
        PHYAD: 0
        Transceiver: internal
        Auto-negotiation: on
        Current message level: 0x000000ff (255)
                               drv probe link timer ifdown ifup rx_err tx_err                                                   
        Link detected: no

[frank-w]

please do specific extra hardware in separate threads…afaik there is already one for the DFP-34X-2C3 where someone created patches for (afair rejected upstream so far)

this thread goes very messy because of different topics mixed