MultiQB project: Next Generation Media Router

sinovoip · March 14, 2017, 9:29am

MultiQB project design:

MultiQB project hardware:

Hardware Specification

SIZE: two-deck, 88x88 mm
CPU Chipset: A20 ARM Cortex™-A7 Dual-Core 1 GHz
GPU Chipset: ARM Mali400MP2Complies with OpenGL ES 2.0/1.1
Memory: 1 GB DDR3
Storage Slot: micro SD Card 16G Bytes
Network Ethernet: – 10/100/1000Mbps WAN x 1 – 10/100/1000Mbps LAN x 4
WIFI: – 3x 2.4GHz, Support IEEE 802.11b/g/n，Up to 300Mbps – 1x 5GHz，Support IEEE 802.11a/n/ac，Up to 433Mbps – External High-Gain Antenna 2.4GHz x3，5GHz x1 –WIFI model MT7632 or AP6335
4G LTE – SimCom Sim7100C, FDD B3 LTE 1800, – Model SIM7100C – External High-Gain Antenna 4G x1
USB: USB Host 2.0 x 1
CAMERA: Camera x 1, Screen resolution HD 1280x720 pixels, 30 FPS, UVC H.264 encoding technology, CSI Connector
AUDIO Input: Microphone x 1
VIDEO Outputs: HDMI out x 1
AUDIO Outputs: 3.5mm Jack and HDMI
SPEAKER: BP-5032-44, 1xSpeaker, Diameter 50mm, Depth 32mm, Power 4w, Impedance 4±15%Ω
KEY: POWER KEY x 1 Touch Sensor Power Button RESET KEY x 1
LED: RJ45 LED (Upload, Download) x 5 WIFI LED (2.4G, 5.8G) x 2 POWER STATUS LED x 1 GPIO LED (4 pins LED) x 1 USB LED x 1 CAMERA LED x 1 4G LED x 1 AUDIO LED x1 MICROPHONE LED x1
Debugging: Serial Console, JTAG
Reserved Pin: GPIO PIN x 26, UART, 12C bus, SPI bus with two chip selects, CAN bus, ADC, PWM, +5V, +3.3V, GND
IR Receiver: x1
Power Source: Micro-USB Power DC 5V/2A
Battery: Li-ION 4400 mAh 3.7V, Battery Connector: x1
Adaptor: DC Adaptor 5V/2A with micro-USB cable