Hi
I get info here,that mt7622 wifi (not mt7615 from r64 version <1) is working with openwrt/lede singleimage. As i have no config for it,i ask here if anyone have more info of which driver drivercode is used,so that i can integrate it to my repo
@bourne_hlm can you give more infos about ra0 in your system,e.g. udev,lshw,module-name,bootlog,dts (/sys/firmware/devicetree),etc.
I found the emmc_singleimage.img from Bpi-r64 quick start (boot from eMMC), That image is build from lede, and it include the mt7622 wifi driver.
Here is the module list:
root@LEDE:~# lsmod | grep mt
ahci_mtk 3008 0
libahci 20891 2 ahci_mtk,libahci_platform
libahci_platform 6530 1 ahci_mtk
libata 138296 3 ahci_mtk,libahci_platform,libahci
mt_whnat 60089 0
mt_wifi 4014425 2 mt_whnat
mtkhnat 54038 2 mt_whnat,mt_wifi
usbcore 154280 9 usb_storage,xhci_mtk,xhci_plat_hcd,xhci_pci,xhci_hcd,ohci_platform,ohci_hcd,ehci_platform,ehci_hcd
xhci_hcd 111422 3 xhci_mtk,xhci_plat_hcd,xhci_pci
xhci_mtk 7872 0
Here is the ls /dev/
root@LEDE:~# ls /dev
autofs null tty4
btif port tty40
bus ppp tty41
console ptmx tty42
cpu_dma_latency pts tty43
crypto ptyp0 tty44
cuse ptyp1 tty45
full ptyp2 tty46
fuse ptyp3 tty47
iio:device0 ptyp4 tty48
kmsg ptyp5 tty49
log ptyp6 tty5
loop-control ptyp7 tty50
loop0 ptyp8 tty51
loop1 ptyp9 tty52
loop2 ptypa tty53
loop3 ptypb tty54
loop4 ptypc tty55
loop5 ptypd tty56
loop6 ptype tty57
loop7 ptypf tty58
mem random tty59
memory_bandwidth shm tty6
mmcblk0 stpbt tty60
mmcblk0boot0 stpbt_raw tty61
mmcblk0boot1 stpbtfwlog tty62
mmcblk0p1 tty tty63
mmcblk0p2 tty0 tty7
mmcblk0p3 tty1 tty8
mmcblk0p4 tty10 tty9
mmcblk0p5 tty11 ttyS0
mmcblk0rpmb tty12 ttyS1
mtd0 tty13 ttyS2
mtd0ro tty14 ttyS3
mtd1 tty15 ttyp0
mtd1ro tty16 ttyp1
mtd2 tty17 ttyp2
mtd2ro tty18 ttyp3
mtd3 tty19 ttyp4
mtd3ro tty2 ttyp5
mtd4 tty20 ttyp6
mtd4ro tty21 ttyp7
mtd5 tty22 ttyp8
mtd5ro tty23 ttyp9
mtd6 tty24 ttypa
mtd6ro tty25 ttypb
mtd7 tty26 ttypc
mtd7ro tty27 ttypd
mtd8 tty28 ttype
mtd8ro tty29 ttypf
mtdblock0 tty3 ubi_ctrl
mtdblock1 tty30 urandom
mtdblock2 tty31 vcs
mtdblock3 tty32 vcs1
mtdblock4 tty33 vcsa
mtdblock5 tty34 vcsa1
mtdblock6 tty35 vga_arbiter
mtdblock7 tty36 watchdog
mtdblock8 tty37 watchdog0
network_latency tty38 zero
network_throughput tty39
Here is the ifconfig:
root@LEDE:~# ifconfig
br-lan Link encap:Ethernet HWaddr 0A:97:0D:E4:16:5A
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fd73:93ac:f6d2::1/60 Scope:Global
inet6 addr: fe80::897:dff:fee4:165a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:70 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:9580 (9.3 KiB)
eth0 Link encap:Ethernet HWaddr 0A:97:0D:E4:16:5A
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:49 errors:0 dropped:3 overruns:0 frame:0
TX packets:70 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4024 (3.9 KiB) TX bytes:10840 (10.5 KiB)
Interrupt:251
eth1 Link encap:Ethernet HWaddr CE:F7:6F:89:24:2D
inet6 addr: fe80::ccf7:6fff:fe89:242d/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:853 errors:0 dropped:0 overruns:0 frame:0
TX packets:323 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:93126 (90.9 KiB) TX bytes:107226 (104.7 KiB)
Interrupt:251
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:2124 errors:0 dropped:0 overruns:0 frame:0
TX packets:2124 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:140892 (137.5 KiB) TX bytes:140892 (137.5 KiB)
ra0 Link encap:Ethernet HWaddr 00:0C:43:26:60:60
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:246
root@LEDE:~# iwconfig
gre0 no wireless extensions.
wds0 RTWIFI[ 934.295566] mtk_do_priv_ioctl ioctl 35585 is not supported SoftAP ESSID:"
MTK_AP1"
[ 934.302164] mtk_do_priv_ioctl ioctl 35585 is not supported Mode:Master Channel=6 Access Point: 00:0C:43:26:60:60
Bit Rate=1 Mb/s
sit0 no wireless extensions.
lo no wireless extensions.
wds1 RTWIFI SoftAP ESSID:""
Mode:Master Channel=6 Access Point: Not-Associated
Bit Rate:1 Mb/s
apcli0 RTWIFI SoftAP ESSID:""
Mode:Managed Channel=6 Access Point: Not-Associated
Bit Rate:7 Mb/s
eth1 no wireless extensions.
wds3 RTWIFI SoftAP ESSID:""
Mode:Master Channel=6 Access Point: Not-Associated
Bit Rate:1 Mb/s
ra0 RTWIFI SoftAP ESSID:"MTK_AP1"
Mode:Master Channel=6 Access Point: 00:0C:43:26:60:60
Bit Rate=288 Mb/s
br-lan no wireless extensions.
gretap0 no wireless extensions.
eth0 no wireless extensions.
wds2 RTWIFI SoftAP ESSID:""
Mode:Master Channel=6 Access Point: Not-Associated
Bit Rate:1 Mb/s
root@LEDE:~#Here is the bootlog, part1:
mmc0 is current device
mmc0 operation
dev_num = 0
MMC read: dev # 0, block # 4096, count 1 ... 1 blocks read: OK
[do_read_image_blks] This is a FIT image,img_size = 0x27004c
mmc0 operation
dev_num = 0
MMC read: dev # 0, block # 4096, count 4993 ... 4993 blocks read: OK
bootm flag=0, states=70f
## Loading kernel from FIT Image at 4007ff28 ...
Using 'config@1' configuration
Trying 'kernel@1' kernel subimage
Description: ARM64 OpenWrt Linux-4.4.177
Type: Kernel Image
Compression: lzma compressed
Data Start: 0x40080010
Data Size: 2524718 Bytes = 2.4 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x41080000
Entry Point: 0x41080000
Hash algo: crc32
Hash value: 47a39bcb
Hash algo: sha1
Hash value: 8a9b2a65a2d53feb69241018b1759403073d0290
Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 4007ff28 ...
Using 'config@1' configuration
Trying 'fdt@1' fdt subimage
Description: ARM64 OpenWrt MTK-AC4300-LYNX device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x402e8780
Data Size: 29898 Bytes = 29.2 KiB
Architecture: AArch64
Hash algo: crc32
Hash value: 5329bc39
Hash algo: sha1
Hash value: 7dfae29bdde835fa3a4cccca0c54515682fe7a30
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x402e8780
Uncompressing Kernel Image ... OK
Loading Device Tree to 6bff5000, end 6bfff4c9 ... OK
Starting kernel ...
[ATF][ 35.412923]save kernel info
[ATF][ 35.415860]Kernel_EL2
[ATF][ 35.418530]Kernel is 64Bit
[ATF][ 35.421618]pc=0x41080000, r0=0x6bff5000, r1=0x0
INFO: BL3-1: Preparing for EL3 exit to normal world, Kernel
INFO: BL3-1: Next image address = 0x41080000
INFO: BL3-1: Next image spsr = 0x3c9
[ATF][ 35.439316]el3_exit
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.4.177 (steven@compiler) (gcc version 5.4.0 (LEDE GCC 5.4.0 r0-f66cc3a8) ) #0 SMP PREEMPT Thu Aug 29 12:08:31 UTC 2019
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] On node 0 totalpages: 262096
[ 0.000000] DMA zone: 4096 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 262096 pages, LIFO batch:31
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] PERCPU: Embedded 19 pages/cpu @ffffffc03ffa2000 s39424 r8192 d30208 u77824
[ 0.000000] pcpu-alloc: s39424 r8192 d30208 u77824 alloc=19*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258000
[ 0.000000] Kernel command line: console=ttyS0,115200n1 initrd=0x44000000,0x615E36 loglevel=8 androidboot.hardware=mt7622 swiotlb=512 rootfstype=squashfs earlyprintk block2mtd.block2mtd=/dev/mmcblk0,65536,eMMC,5 mtdparts=eMMC:768k(mbr)ro,512k(uboot),512k(Config),256k(Factory),32M(Kernel),2048M(usrdata)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] software IO TLB: mapped [mem 0x7fcf4000-0x7fdf4000] (1MB)
[ 0.000000] Memory: 1014900K/1048384K available (4920K kernel code, 391K rwdata, 1768K rodata, 328K init, 377K bss, 33484K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] .init : 0xffffff800870c000 - 0xffffff800875e000 ( 328 KB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff800854f000 ( 4924 KB)
[ 0.000000] .rodata : 0xffffff800854f000 - 0xffffff800870c000 ( 1780 KB)
[ 0.000000] .data : 0xffffff800875e000 - 0xffffff80087bfc70 ( 392 KB)
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000000] 0xffffffbdc0000000 - 0xffffffbdc1000000 ( 16 MB actual)
[ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 KB)
[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] Architected cp15 timer(s) running at 12.50MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049cda, max_idle_ns: 440795202628 ns
[ 0.000003] sched_clock: 56 bits at 12MHz, resolution 80ns, wraps every 4398046511080ns
[ 0.000057] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 191126102035 ns
[ 0.000226] Console: colour dummy device 80x25
[ 0.000243] Calibrating delay loop (skipped), value calculated using timer frequency.. 25.00 BogoMIPS (lpj=50000)
[ 0.000251] pid_max: default: 32768 minimum: 301
[ 0.000301] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000306] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000805] sched-energy: CPU device node has no sched-energy-costs
[ 0.000812] Invalid sched_group_energy for CPU0
[ 0.000816] CPU0: update cpu_capacity 1024
[ 0.000845] ASID allocator initialised with 32768 entries
[ 0.032096] Detected VIPT I-cache on CPU1
[ 0.032125] Invalid sched_group_energy for CPU1
[ 0.032127] CPU1: update cpu_capacity 1024
[ 0.032129] CPU1: Booted secondary processor [410fd034]
[ 0.032165] Brought up 2 CPUs
[ 0.032178] SMP: Total of 2 processors activated.
[ 0.032184] CPU features: detected feature: 32-bit EL0 Support
[ 0.032190] CPU: All CPU(s) started at EL2
[ 0.032202] alternatives: patching kernel code
[ 0.032279] Invalid sched_group_energy for CPU1
[ 0.032284] Invalid sched_group_energy for Cluster1
[ 0.032288] Invalid sched_group_energy for CPU0
[ 0.032291] Invalid sched_group_energy for Cluster0
[ 0.036750] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.036768] futex hash table entries: 512 (order: 4, 65536 bytes)
[ 0.036874] pinctrl core: initialized pinctrl subsystem
[ 0.037387] NET: Registered protocol family 16
[ 0.037820] [SPM] spm_base = ffffff8008026000
[ 0.037825] [SPM] spm_irq_0 = 6, spm_irq_1 = 7
[ 0.037828] [SPM] spm_irq_2 = 8, spm_irq_3 = 9
[ 0.037831] [SPM] set spm as wakeup devcie.
[ 0.037836] [SPM] spm_rtc cnt: 24414.
[ 0.052061] cpuidle: using governor menu
[ 0.052142] vdso: 2 pages (1 code @ ffffff8008555000, 1 data @ ffffff8008764000)
[ 0.052296] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.052395] Serial: AMBA PL011 UART driver
[ 0.052449] [SPM] PWAKE_EN:1, PCMWDT_EN:0, BYPASS_SYSPWREQ:0, I2C_CHANNEL:2
[ 0.052454] [SLP] SLEEP_DPIDLE_EN:1, REPLACE_DEF_WAKESRC:0, SUSPEND_LOG_EN:1
[ 0.055969] genirq: Setting trigger mode 2 for irq 229 failed (mtk_sysirq_set_type+0x0/0xc8)
[ 0.078122] vgaarb: loaded
[ 0.078369] SCSI subsystem initialized
[ 0.080347] rbus 18000000.wbsys: PCI host bridge to bus 0000:00
[ 0.080360] pci_bus 0000:00: root bus resource [mem 0x18000000-0x180fffff]
[ 0.080368] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.080386] pci 0000:00:00.0: [14c3:7622] type 00 class 0x000280
[ 0.080402] pci 0000:00:00.0: reg 0x10: [mem 0x18000000-0x1800000f 64bit]
[ 0.080409] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x0000000f]
[ 0.080415] pci 0000:00:00.0: reg 0x1c: [mem 0x00000000-0x0000000f]
[ 0.080421] pci 0000:00:00.0: reg 0x20: [mem 0x00000000-0x0000000f]
[ 0.080428] pci 0000:00:00.0: reg 0x24: [mem 0x00000000-0x0000000f]
[ 0.080458] pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-22
[ 0.080881] clocksource: Switched to clocksource arch_sys_counter
[ 0.087523] NET: Registered protocol family 2
[ 0.087900] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.087958] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.088072] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.088140] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.088162] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.088275] NET: Registered protocol family 1
[ 0.088310] PCI: CLS 0 bytes, default 128
[ 0.088444] Unpacking initramfs...
[ 0.088452] Initramfs unpacking failed: junk in compressed archive
[ 0.091105] Freeing initrd memory: 6228K
[ 0.098899] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.099095] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.099555] fuse init (API version 7.23)
[ 0.100213] io scheduler noop registered
[ 0.100401] io scheduler cfq registered (default)
[ 0.203132] mtk-pcie 1a140000.pcie: Port0 link down
[ 0.303735] mtk-pcie 1a140000.pcie: Port1 link down
[ 0.303958] mtk-pcie 1a140000.pcie: PCI host bridge to bus 0001:00
[ 0.303967] pci_bus 0001:00: root bus resource [??? 0x00000000 flags 0x0]
[ 0.303974] pci_bus 0001:00: root bus resource [mem 0x20000000-0x2fffffff]
[ 0.303981] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.308085] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.309235] console [ttyS0] disabled
[ 0.329432] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 232, base_baud = 1562500) is a ST16650V2
[ 1.049813] console [ttyS0] enabled
[ 1.054008] Unable to detect cache hierarchy for CPU 0
[ 1.062241] loop: module loaded
[ 1.065866] dump_power_table[0] = { .cpufreq_khz = 1350000, .cpufreq_ncpu = 2, .cpufreq_power = 995 }
[ 1.075092] dump_power_table[1] = { .cpufreq_khz = 1262500, .cpufreq_ncpu = 2, .cpufreq_power = 811 }
[ 1.084343] dump_power_table[2] = { .cpufreq_khz = 1137500, .cpufreq_ncpu = 2, .cpufreq_power = 736 }
[ 1.093564] dump_power_table[3] = { .cpufreq_khz = 1025000, .cpufreq_ncpu = 2, .cpufreq_power = 624 }
[ 1.102779] dump_power_table[4] = { .cpufreq_khz = 1350000, .cpufreq_ncpu = 1, .cpufreq_power = 517 }
[ 1.111996] dump_power_table[5] = { .cpufreq_khz = 812500, .cpufreq_ncpu = 2, .cpufreq_power = 492 }
[ 1.121126] dump_power_table[6] = { .cpufreq_khz = 1262500, .cpufreq_ncpu = 1, .cpufreq_power = 377 }
[ 1.130343] dump_power_table[7] = { .cpufreq_khz = 600000, .cpufreq_ncpu = 2, .cpufreq_power = 376 }
[ 1.139470] dump_power_table[8] = { .cpufreq_khz = 1137500, .cpufreq_ncpu = 1, .cpufreq_power = 333 }
[ 1.148687] dump_power_table[9] = { .cpufreq_khz = 437500, .cpufreq_ncpu = 2, .cpufreq_power = 295 }
[ 1.157817] dump_power_table[10] = { .cpufreq_khz = 1025000, .cpufreq_ncpu = 1, .cpufreq_power = 258 }
[ 1.167119] dump_power_table[11] = { .cpufreq_khz = 300000, .cpufreq_ncpu = 2, .cpufreq_power = 225 }
[ 1.176334] dump_power_table[12] = { .cpufreq_khz = 812500, .cpufreq_ncpu = 1, .cpufreq_power = 204 }
[ 1.185549] dump_power_table[13] = { .cpufreq_khz = 600000, .cpufreq_ncpu = 1, .cpufreq_power = 166 }
[ 1.194764] dump_power_table[14] = { .cpufreq_khz = 437500, .cpufreq_ncpu = 1, .cpufreq_power = 140 }
[ 1.203978] dump_power_table[15] = { .cpufreq_khz = 300000, .cpufreq_ncpu = 1, .cpufreq_power = 119 }
[ 1.214395] [cal] calefuse1 = 0x7fb6ac40
[ 1.218328] [cal] calefuse2 = 0x6fc010
[ 1.222081] [cal] g_adc_ge_t = 0x36a
[ 1.225653] [cal] g_adc_oe_t = 0x1fe
[ 1.229227] [cal] g_degc_cali = 0x31
[ 1.232792] [cal] g_adc_cali_en_t = 0x1
[ 1.236625] [cal] g_o_slope = 0x0
[ 1.239939] [cal] g_o_slope_sign = 0x0
[ 1.243684] [cal] g_id = 0x0
[ 1.246650] [cal] g_o_vtsmcu1 = 0x0
[ 1.250135] [cal] g_o_vtsmcu2 = 0x1bf
[ 1.253793] [cal] g_o_vtsmcu3 = 0x0
[ 1.257277] [cal] g_o_vtsmcu4 = 0x0
[ 1.260756] [cal] g_ge = 0x373
[ 1.263892] [cal] g_gain = 0x2a83
[ 1.267289] [cal] g_x_roomt1 = 0x1f24
[ 1.273944] MTK-BTIF[E]hal_btif_clk_get_and_prepare(286):[CCF]clk_btif=ffffffc003347000
[ 1.281964] MTK-BTIF[E]hal_btif_clk_get_and_prepare(292):[CCF]clk_btif_apdma=ffffffc03e597100
[ 1.292053] [btmtk_err] btmtk_get_irq: irq_id:240 irq_flags:8
[ 1.309013] Not Support SPI-Nand device:[0x0 0x0]
[ 1.314023] mtk-nor 11014000.spi: unrecognized JEDEC id bytes: 00, ef, aa
[ 1.320827] mtk-nor: probe of 11014000.spi failed with error -2
[ 1.327210] libphy: Fixed MDIO Bus: probed
[ 1.331729] sean debug physpeed = 2500
[ 1.358208] libphy: mdio: probed
[ 1.361465] mtk_soc_eth 1b100000.ethernet: generated random MAC address 0a:97:0d:e4:16:5a
[ 1.369802] mtk_soc_eth 1b100000.ethernet: path gmac1_sgmii in set_mux_gdm1_to_gmac1_esw updated = 1
[ 1.378940] mtk_soc_eth 1b100000.ethernet: mux mux_gmac2_gmac0_to_gephy isn't present on the SoC
[ 1.387726] mtk_soc_eth 1b100000.ethernet: mux mux_u3_gmac2_to_qphy isn't present on the SoC
[ 1.396164] mtk_soc_eth 1b100000.ethernet: path gmac1_sgmii in set_mux_gmac1_gmac2_to_sgmii_rgmii updated = 1
[ 1.406078] mtk_soc_eth 1b100000.ethernet: mux mux_gmac12_to_gephy_sgmii isn't present on the SoC
[ 1.414977] mtk_soc_eth 1b100000.ethernet: connected mac 0 to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
[ 1.425655] mtk_soc_eth 1b100000.ethernet eth0: mediatek frame engine at 0xffffff80088c0000, irq 251
[ 1.434808] mtk_soc_eth 1b100000.ethernet: generated random MAC address ce:f7:6f:89:24:2d
[ 1.443135] mtk_soc_eth 1b100000.ethernet: path gmac2_rgmii in set_mux_gdm1_to_gmac1_esw updated = 0
[ 1.452272] mtk_soc_eth 1b100000.ethernet: mux mux_gmac2_gmac0_to_gephy isn't present on the SoC
[ 1.461067] mtk_soc_eth 1b100000.ethernet: mux mux_u3_gmac2_to_qphy isn't present on the SoC
[ 1.469507] mtk_soc_eth 1b100000.ethernet: path gmac2_rgmii in set_mux_gmac1_gmac2_to_sgmii_rgmii updated = 0
[ 1.479421] mtk_soc_eth 1b100000.ethernet: mux mux_gmac12_to_gephy_sgmii isn't present on the SoC
[ 1.488308] mtk_soc_eth 1b100000.ethernet: connected mac 1 to PHY at fixed-0:01 [uid=00000000, driver=Generic PHY]
[ 1.498925] mtk_soc_eth 1b100000.ethernet eth1: mediatek frame engine at 0xffffff80088c0000, irq 251
[ 1.508059] netif_napi_add() called with weight 256 on device
[ 1.515262] MTK_WDT_NONRST_REG(20000000)
[ 1.519371] mtk-wdt 10212000.watchdog: register restart_handler on reboot_notifier_list for psci reset
[ 1.528681] mtk-wdt 10212000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
[ 1.536628] register cpuidle driver!!!!!!!!!!!!!!!!!
[ 1.542242] mediatek-mt7622-pinctrl 10005000.pinctrl: pin_config_group_set op failed for group 47
[ 1.551127] mtk-msdc 11230000.mmc: Error applying setting, reverse things back
[ 1.558389] msdc_drv_probe!
[ 1.561728] mtk-msdc 11230000.mmc: Regulator set error -22: 3300000 - 3300000
[ 1.568892] mediatek-mt7622-pinctrl 10005000.pinctrl: pin_config_group_set op failed for group 47
[ 1.577763] mtk-msdc 11230000.mmc: Error applying setting, reverse things back
[ 1.617048] mediatek-mt7622-pinctrl 10005000.pinctrl: pin_config_group_set op failed for group 19
[ 1.625992] mtk-msdc 11240000.mmc: Error applying setting, reverse things back
[ 1.633315] msdc_drv_probe!
[ 1.636144] mtk-msdc 11240000.mmc: Got CD GPIO
[ 1.641191] mediatek-mt7622-pinctrl 10005000.pinctrl: pin_config_group_set op failed for group 19
[ 1.650136] mtk-msdc 11240000.mmc: Error applying setting, reverse things back
[ 1.690820] nf_conntrack version 0.5.0 (7977 buckets, 31908 max)
[ 1.697696] NET: Registered protocol family 10
[ 1.702789] sit: IPv6 over IPv4 tunneling driver
[ 1.707835] NET: Registered protocol family 17
[ 1.712319] mmc0: MAN_BKOPS_EN bit is not set
[ 1.712333] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.712338] 8021q: 802.1Q VLAN Support v1.8
[ 1.712727] registered taskstats version 1
[ 1.739182] mediatek-mt7622-pinctrl 10005000.pinctrl: pin_config_group_set op failed for group 47
[ 1.748062] mtk-msdc 11230000.mmc: Error applying setting, reverse things back
[ 1.761444] mtk-msdc 11230000.mmc: phase: [map:f0ffffff] [maxlen:24] [final:8]
[ 1.768668] mtk-msdc 11230000.mmc: Final cmd pad delay: 8
[ 1.775628] mtk-msdc 11230000.mmc: phase: [map:f87fffff] [maxlen:23] [final:7]
[ 1.782852] mtk-msdc 11230000.mmc: Final data pad delay: 7
[ 1.789111] mmc0: new HS200 MMC card at address 0001
[ 1.794400] mmcblk0: mmc0:0001 008G30 7.28 GiB
[ 1.799079] mmcblk0boot0: mmc0:0001 008G30 partition 1 4.00 MiB
[ 1.805132] mmcblk0boot1: mmc0:0001 008G30 partition 2 4.00 MiB
[ 1.811207] mmcblk0rpmb: mmc0:0001 008G30 partition 3 4.00 MiB
[ 1.819139] GPT:Primary header thinks Alt. header is not at the end of the disk.
[ 1.826545] GPT:1 != 15269887
[ 1.829512] GPT:Alternate GPT header not at the end of the disk.
[ 1.835520] GPT:1 != 15269887
[ 1.838486] GPT: Use GNU Parted to correct GPT errors.
[ 1.843646] mmcblk0: p1 p2 p3 p4 p5
[ 1.859116] mediatek-mt7622-pinctrl 10005000.pinctrl: pin_config_group_set op failed for group 19
[ 1.867998] mtk-msdc 11240000.mmc: Error applying setting, reverse things back
[ 1.917444] mediatek-mt7622-pinctrl 10005000.pinctrl: pin_config_group_set op failed for group 19
[ 1.926317] mtk-msdc 11240000.mmc: Error applying setting, reverse things back
[ 1.981637] mediatek-mt7622-pinctrl 10005000.pinctrl: pin_config_group_set op failed for group 19
[ 1.990506] mtk-msdc 11240000.mmc: Error applying setting, reverse things back
[ 2.277212] mt753x gsw@0: Switch is MediaTek MT7531BE rev 0
[ 2.291580] libphy: mt753x_mdio: probed
[ 2.422590] mt753x gsw@0: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> START CALIBRATION:
[ 2.431119] mt753x gsw@0: -------- gephy-calbration (port:0) --------
[ 2.449226] CALDLY = 40
[ 2.563342] random: nonblocking pool is initialized
[ 2.684115] GE Rext AnaCal Saturation!
[ 2.688210] GE Rxet cal something wrong2
[ 2.879926] GE R50 AnaCal Saturation!
[ 2.883934] GE R50 AnaCal Done! (32) (0x0)(0x80)
[ 3.070797] GE R50 AnaCal Saturation!
[ 3.074804] GE R50 AnaCal Done! (32) (0x0)(0x80)
[ 3.261621] GE R50 AnaCal Saturation!
[ 3.265629] GE R50 AnaCal Done! (32) (0x0)(0x80)
[ 3.452310] GE R50 AnaCal Saturation!
[ 3.456317] GE R50 AnaCal Done! (32) (0x0)(0x80)
[ 3.464602] GE 1e_174(0x8080), 1e_175(0x8080)
[ 3.529037] GE Tx offset AnaCal Done! (pair-0)(6)(0x25) 0x1e_172=0x2520
[ 3.578507] GE Tx offset AnaCal Done! (pair-1)(6)(0x25) 0x1e_172=0x2525
[ 3.601234] GE Tx offset AnaCal Done! (pair-2)(1)(0x1) 0x1e_173=0x120
[ 3.639808] GE Tx offset AnaCal Done! (pair-3)(4)(0x23) 0x1e_173=0x123
[ 3.752982] GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x3c0f)
[ 3.803236] GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x1414)
[ 3.857143] GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x121a)
[ 3.897848] GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x151d)
[ 3.961582] PORT 0 RX_DC_OFFSET
[ 3.975813] before pairA output = 1d
[ 3.981452] after pairA output = 0
[ 3.986826] before pairB output = e
[ 3.992377] after pairB output = 1
[ 3.997760] before pairC output = d
[ 4.003313] after pairC output = 0
[ 4.008696] before pairD output = 1e
[ 4.014343] after pairD output = fe
[ 4.018130] mt753x gsw@0: -------- gephy-calbration (port:1) --------
[ 4.035279] CALDLY = 40
[ 4.218398] GE R50 AnaCal Saturation!
[ 4.222404] GE R50 AnaCal Done! (32) (0x0)(0x80)
[ 4.407270] GE R50 AnaCal Saturation!
[ 4.411278] GE R50 AnaCal Done! (32) (0x0)(0x80)
[ 4.596131] GE R50 AnaCal Saturation!
[ 4.600140] GE R50 AnaCal Done! (32) (0x0)(0x80)
[ 4.785044] GE R50 AnaCal Saturation!
[ 4.789052] GE R50 AnaCal Done! (32) (0x0)(0x80)
[ 4.797293] GE 1e_174(0x8080), 1e_175(0x8080)
[ 4.861102] GE Tx offset AnaCal Done! (pair-0)(6)(0x25) 0x1e_172=0x2520
[ 4.910136] GE Tx offset AnaCal Done! (pair-1)(6)(0x25) 0x1e_172=0x2525
[ 4.969727] GE Tx offset AnaCal Done! (pair-2)(8)(0x27) 0x1e_173=0x2720
[ 5.013473] GE Tx offset AnaCal Done! (pair-3)(5)(0x24) 0x1e_173=0x2724
[ 5.138677] GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x380e)
[ 5.175327] GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x1717)
[ 5.216044] GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x1921)
[ 5.250137] GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x161e)
[ 5.313837] PORT 1 RX_DC_OFFSET
[ 5.328079] before pairA output = e
[ 5.333632] after pairA output = ff
[ 5.339104] before pairB output = f
[ 5.344654] after pairB output = 1
[ 5.350037] before pairC output = f
[ 5.355588] after pairC output = 1
[ 5.360976] before pairD output = f
[ 5.366522] after pairD output = ff
[ 5.370310] mt753x gsw@0: -------- gephy-calbration (port:2) --------
[ 5.387437] CALDLY = 40
[ 5.570471] GE R50 AnaCal Saturation!
[ 5.574480] GE R50 AnaCal Done! (32) (0x0)(0x80)
[ 5.759318] GE R50 AnaCal Saturation!
[ 5.763326] GE R50 AnaCal Done! (32) (0x0)(0x80)
[ 5.948302] GE R50 AnaCal Saturation!
[ 5.952310] GE R50 AnaCal Done! (32) (0x0)(0x80)
[ 6.137154] GE R50 AnaCal Saturation!
[ 6.141162] GE R50 AnaCal Done! (32) (0x0)(0x80)
[ 6.149414] GE 1e_174(0x8080), 1e_175(0x8080)
[ 6.207887] GE Tx offset AnaCal Done! (pair-0)(5)(0x24) 0x1e_172=0x2420
[ 6.246371] GE Tx offset AnaCal Done! (pair-1)(4)(0x23) 0x1e_172=0x2423
[ 6.284661] GE Tx offset AnaCal Done! (pair-2)(4)(0x23) 0x1e_173=0x2320
[ 6.333717] GE Tx offset AnaCal Done! (pair-3)(6)(0x25) 0x1e_173=0x2325
[ 6.412840] GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x5816)
[ 6.456025] GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x1515)
[ 6.490130] GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x1921)
[ 6.530818] GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x151d)
[ 6.594589] PORT 2 RX_DC_OFFSET
[ 6.608830] before pairA output = f
[ 6.614384] after pairA output = ff
[ 6.619856] before pairB output = d
[ 6.625408] after pairB output = ff
[ 6.630872] before pairC output = f
[ 6.636418] after pairC output = 0
[ 6.641802] before pairD output = f
[ 6.647351] after pairD output = 0
[ 6.651052] mt753x gsw@0: -------- gephy-calbration (port:3) --------
[ 6.668219] CALDLY = 40
[ 6.851288] GE R50 AnaCal Saturation!
[ 6.855297] GE R50 AnaCal Done! (32) (0x0)(0x80)
[ 7.040230] GE R50 AnaCal Saturation!
[ 7.044238] GE R50 AnaCal Done! (32) (0x0)(0x80)
[ 7.229128] GE R50 AnaCal Saturation!
[ 7.233136] GE R50 AnaCal Done! (32) (0x0)(0x80)
[ 7.417958] GE R50 AnaCal Saturation!
[ 7.421965] GE R50 AnaCal Done! (32) (0x0)(0x80)
[ 7.430185] GE 1e_174(0x8080), 1e_175(0x8080)
[ 7.483408] GE Tx offset AnaCal Done! (pair-0)(4)(0x23) 0x1e_172=0x2320
[ 7.527112] GE Tx offset AnaCal Done! (pair-1)(5)(0x24) 0x1e_172=0x2324
[ 7.565609] GE Tx offset AnaCal Done! (pair-2)(4)(0x23) 0x1e_173=0x2320
[ 7.614617] GE Tx offset AnaCal Done! (pair-3)(6)(0x25) 0x1e_173=0x2325
[ 7.693725] GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x5816)
[ 7.769896] GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x1111)
[ 7.823757] GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x141c)
[ 7.877641] GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x141c)
[ 7.941442] PORT 3 RX_DC_OFFSET
[ 7.955649] before pairA output = e
[ 7.961198] after pairA output = 0
[ 7.966575] before pairB output = 1e
[ 7.972210] after pairB output = 0
[ 7.977597] before pairC output = e
[ 7.983148] after pairC output = 1
[ 7.988534] before pairD output = 1e
[ 7.994174] after pairD output = 1
[ 7.997874] mt753x gsw@0: -------- gephy-calbration (port:4) --------
[ 8.015032] CALDLY = 40
[ 8.198079] GE R50 AnaCal Saturation!
[ 8.202089] GE R50 AnaCal Done! (32) (0x0)(0x80)
[ 8.386915] GE R50 AnaCal Saturation!
[ 8.390922] GE R50 AnaCal Done! (32) (0x0)(0x80)
[ 8.575700] GE R50 AnaCal Saturation!
[ 8.579710] GE R50 AnaCal Done! (32) (0x0)(0x80)
[ 8.764549] GE R50 AnaCal Saturation!
[ 8.768556] GE R50 AnaCal Done! (32) (0x0)(0x80)
[ 8.776804] GE 1e_174(0x8080), 1e_175(0x8080)
[ 8.824769] GE Tx offset AnaCal Done! (pair-0)(3)(0x22) 0x1e_172=0x2220
[ 8.873784] GE Tx offset AnaCal Done! (pair-1)(6)(0x25) 0x1e_172=0x2225
[ 8.933357] GE Tx offset AnaCal Done! (pair-2)(8)(0x27) 0x1e_173=0x2720
[ 8.966537] GE Tx offset AnaCal Done! (pair-3)(3)(0x22) 0x1e_173=0x2722
[ 9.078534] GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x4411)
[ 9.194248] GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0xa0a)
[ 9.274275] GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x1018)
[ 9.347848] GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x1119)
[ 9.411624] PORT 4 RX_DC_OFFSET
[ 9.425800] before pairA output = 1e
[ 9.431439] after pairA output = 0
[ 9.436821] before pairB output = f
[ 9.442375] after pairB output = 1
[ 9.447758] before pairC output = f
[ 9.453314] after pairC output = 0
[ 9.458696] before pairD output = 1e
[ 9.464336] after pairD output = ff
[ 9.470475] [SPM] pwrap node has not register regmap
[ 9.476006] regulator regulator.3: info->modeset_reg 0xc = 0x181c32a2
[ 9.483373] [SVS] DCVALUES is minus, set 0
[ 9.487670] regulator regulator.3: info->modeset_reg 0xc = 0x101c32a2
[ 9.495047] 6 cmdlinepart partitions found on MTD device eMMC
[ 9.500806] Creating 6 MTD partitions on "eMMC":
[ 9.505429] 0x000000000000-0x0000000c0000 : "mbr"
[ 9.510734] 0x0000000c0000-0x000000140000 : "uboot"
[ 9.516113] 0x000000140000-0x0000001c0000 : "Confignel"
[ 9.533975] 2 fit-fw partitions found on MTD device Kernel
[ 9.539476] 0x000000200000-0x000000480000 : "kernel"
[ 9.545026] 0x000000480000-0x000002200000 : "rootfs"
[ 9.550708] mtd: device 6 (rootfs) set to be root filesystem
[ 9.556383] 1 squashfs-split partitions found on MTD device rootfs
[ 9.562570] 0x000000c70000-0x000002200000 : "rootfs_data"
[ [ 10.199779] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 10.226098] usbcore: registered new interface driver usbfs
[ 10.231668] usbcore: registered new interface driver hub
[ 10.237044] usbcore: registered new device driver usb
[ 10.243030] gpio-keys gpio-keys: failed to set debounce_interval for gpio:511
[ 10.252850] libata version 3.00 loaded.
28] ahci 1a200000.sata: couldn't get PHY in node sata: -517
[ 10.378915] sdhci: Secure Digital Host Controller Interface driver
[ 10.378916] sdhci: Copyright(c) Pierre Ossman
[ 10.379212] sdhci-pltfm: SDHCI platform and OF driver helper
[ 10.380112] usbcore: registered new interface driver usb-storage
[ 10.380188] kmodloader: done loading kernel modules from /etc/moduifconfig: SIOCSIFHWADDR: Cannot assign requested address
ifconfig: SIOCSIFHWADDR: Cannot assign requested address
sendto(): Network is unreachable
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug levelHere is the bootlog, part2
[ 16.004498] mount_root: loading kmods from internal overlay
[ 16.016663] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 16.024074] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 16.111339] block: attempting to load /etc/config/fstab
[ 16.116649] block: unable to load configuration (fstab: Entry not found)
[ 16.123372] block: no usable configuration
[ 16.127889] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[ 16.136236] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 16.170950] procd: - early -
[ 16.173905] procd: - watchdog -
[ 16.742387] procd: - watchdog -
[ 16.745649] procd: - ubus -
[ 16.878477] procd: - init -
[ 16.978609] kmodloader: loading kernel modules from /etc/modules.d/*
[ 16.988019] l2tp_core: L2TP core driver, V2.0
[ 16.992815] l2tp_netlink: L2TP netlink interface
[ 16.997879] gre: GRE over IPv4 demultiplexor driver
[ 17.003264] ip_gre: GRE over IPv4 tunneling driver
[ 17.009909] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 17.020406] cryptodev: driver 1.8 loaded.
[ 17.026587] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 17.034639] mediatek_soc_hnat 1b100000.hnat: wan = eth1
[ 17.040025] mediatek_soc_hnat 1b100000.hnat: ppd = eth0
[ 17.045321] mediatek_soc_hnat 1b100000.hnat: gmac num = 2
[ 17.051533] mediatek_soc_hnat 1b100000.hnat: FOE entry number = 16384
[ 17.058772] mediatek_soc_hnat 1b100000.hnat: hwnat start
[ 17.066645] ahci 1a200000.sata: couldn't get PHY in node sata: -517
[ 17.123890] xt_time: kernel timezone is -0000
[ 17.731310] register mt_drv
[ 17.738569]
[ 17.738569] == pAd = ffffff8009501000, size = 7221120, Status=0 ==
[ 17.746264] AP Driver version-5.0.4.0
[ 17.749988] read sub id = 1
[ 17.752780] Use 1st iPAiLNA default bin.
[ 17.756773] Use 1st /etc_ro/wlan/MT7622_EEPROM.bin default bin.
[ 17.763274] <--mt7622_init()
[ 17.767027] <-- RTMPAllocTxRxRingMemory, Status=0
[ 17.772954] register mt_drv
[ 17.773452] ahci 1a200000.sata: couldn't get PHY in node sata: -517
[ 17.782256] add_oom_notifier()
[ 17.789122] PPP generic driver version 2.4.2
[ 17.794107] PPP MPPE Compression module registered
[ 17.800220] NET: Registered protocol family 24
[ 17.805581] PPTP driver version 0.8.5
[ 17.811124] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 17.817219] whnat_module_init(): module init and register callback for whnat
[ 17.824390] create whnat_ctrl ok!!!
[ 17.828031] wed_slot_map_get(): assign slot_id:0 for entry: 0!
[ 17.833998] wed_slot_map_get(): assign slot_id:1 for entry: 1!
[ 17.840031] whnat_hif_pcie_mirror_probe(): hif_cfg base addr=ffffff8009374400
[ 17.848604] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 22.449246] device eth0 entered promiscuous mode
[ 22.462379] br-lan: port 1(eth0) entered forwarding state
[ 22.467894] br-lan: port 1(eth0) entered forwarding state
[ 22.944785] ra0: ===> main_virtual_if_open
[ 22.950135] load l1profile succeed!
[ 22.954268] WHNAT=0
[ 22.956415] whnat_driver_init(): chip not support wifi hardware nat feature
[ 23.287841] APWdsInitialize():WdsEntry Number=4
[ 23.293474] RtmpOSFileOpen(): Error 2 opening /etc/Wireless/RT2860/RT2860_5G.dat
[ 23.300946] Open file "/etc/Wireless/RT2860/RT2860_5G.dat" failed!
[ 23.308199] E2pAccessMode=2
[ 23.311376] SSID[0]=MTK_AP1, EdcaIdx=0
[ 23.315691] DBDC Mode=0, eDBDC_mode = 0
[ 23.319883] BSS0 PhyMode=14
[ 23.322773] wmode_band_equal(): Band Equal!
[ 23.327780] BandSteering=0
[ 23.330610] BndStrgBssIdx=
[ 23.333518] [TxPower] BAND0: 100
[ 23.337152] Power Boost (CCK, OFDM): RTMPSetProfileParameters[PowerUpCckOfdm] BAND1: (0)-(0)-(0)-(0)-(0)-(0)-(0)
[ 23.347579] Power Boost (HT20): RTMPSetProfileParametersPower Boost (HT40): RTMPSetProfileParametersPower Boost (VHT20): RTMPSetProfileParametersPower Boost (VHT40): RTMPSetProfileParametersPower Boost (VHT80): RTMPSetProfileParametersPower Boost (VHT160): RTMPSetProfileParameters[CCKTxStream] BAND0: 4
[ 23.375894] [PERCENTAGEenable] BAND0: 0
[ 23.379928] [BFBACKOFFenable] BAND0: 0
[ 23.383841] CalCacheApply = 0
[ 23.387424] FragThreshold[0]=2346
[ 23.393416] DfsZeroWait Support=0/0
[ 23.397470] DfsZeroWaitCacTime=255/255
[ 23.402062] read_etxbf: ETxBfEnCond = 1
[ 23.405918] read_etxbf: BSSID[0]
[ 23.409163] read_etxbf: MBSS[0] ETxBfEnCond = 1
[ 23.436035] If/wds0 - PeerPhyOpMode=255
[ 23.440413] APWdsInitialize():WdsEntry Number=4
[ 23.444969] WDS-Enable mode=0
[ 23.448035] AndesSendCmdMsg: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
[ 23.457793] AndesSendCmdMsg: Command type = ed, Extension command type = 48
[ 23.466656] HT: WDEV[0] Ext Channel = ABOVE
[ 23.471041] HT: greenap_cap = 1
[ 23.474289] ChipI=7622, Value=0, pcie_aspm in profile=0
[ 23.501759] ICapMode = 0
[ 23.507951] WtcSetMaxStaNum: BssidNum:1, MaxStaNum:124 (WdsNum:4, ApcliNum:2, MaxNumChipRept:16), MinMcastWcid:125
[ 23.518459] Fair Queueing Scheduler Initialization...
[ 23.523687] Top Init Done!
[ 23.526419] Use dev_alloc_skb
[ 23.529801] RX[0] DESC ffffffc03b936000 size = 8192
[ 23.534855] RX[1] DESC ffffffc03b938000 size = 8192
[ 23.539840] cut_through_init(): ct sw token number = 4095
[ 23.545413] cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
[ 23.553185] cut_through_token_list_init(): ffffffc03bb4d710,ffffffc03bb4d710
[ 23.560401] cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096
[ 23.568164] cut_through_token_list_init(): ffffffc03bb4d730,ffffffc03bb4d730
[ 23.575292] whnat_ring_init(): cookie=ffffff8009501000
[ 23.580447] whnat_ring_init(): whnat can't find for cookie:ffffff8009501000
[ 23.587423] Hif Init Done!
[ 23.590144] ctl->txq = ffffff8009bdd738
[ 23.593993] ctl->rxq = ffffff8009bdd750
[ 23.597842] ctl->ackq = ffffff8009bdd768
[ 23.601778] ctl->kickq = ffffff8009bdd780
[ 23.605798] ctl->tx_doneq = ffffff8009bdd798
[ 23.610082] ctl->rx_doneq = ffffff8009bdd7b0
[ 23.614523] mt_rbus 0000:00:00.0: Direct firmware load for mt7622_patch_e2_hdr.bin failed with error -2
[ 23.623939] Parsing patch header
[ 23.627185] Built date: 20190801210006a
[ 23.631268]
[ 23.632760] Platform: ALPS
[ 23.635640] HW/SW version: 0x8a108a10
[ 23.639463] Patch version: 0x00000010
[ 23.643284] Target address: 0x9c000, length: 82080
[ 23.648348] patch is not ready && get semaphore success
[ 23.653653] EventGenericEventHandler: CMD Success
[ 23.658922] MtCmdPatchFinishReq
[ 23.673369] EventGenericEventHandler: CMD Success
[ 23.678132] release patch semaphore
[ 23.681648] WfMcuHwInit: Before NICLoadFirmware, check ICapMode = 0
[ 23.687937] Parsing CPU 0 fw tailer
[ 23.691445] Chip ID: 0x06
[ 23.694214] Eco version: 0x00
[ 23.697306] Region number: 0x00
[ 23.700558] Format version: 0x00
[ 23.703909] Ram version: _reserved_
[ 23.707632] Built date: 20190801210351
[ 23.711759] Common crc: 0x0
[ 23.714655] Parsing tailer region 0
[ 23.718154] Feature set: 0x01
[ 23.721270] Target address: 0xb7000, Download size: 249856
[ 23.726856] Parsing tailer region 1
[ 23.730354] Feature set: 0x01
[ 23.733470] Target address: 0x203dc00, Download size: 46960
[ 23.739184] EventGenericEventHandler: CMD Success
[ 23.747994] EventGenericEventHandler: CMD Success
[ 23.753116] MtCmdFwStartReq: override = 0x0, address = 0x0
[ 23.800086] EventGenericEventHandler: CMD Success
[ 23.804846] MCU Init Done!
[ 23.807620] efuse_probe: efuse = 2
[ 23.811049] RtmpChipOpsEepromHook::e2p_type=2, inf_Type=4
[ 23.816489] RtmpEepromGetDefault::e2p_dafault=2
[ 23.821063] RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 2
[ 23.828692] NVM is FLASH mode. dev_idx [0] FLASH OFFSET [0x0]
[ 23.834876] RtmpOSFileOpen(): Error 2 opening /etc_ro/wlan/MT7615_EEPROM.bin
[ 23.841982] --> Error opening file /etc_ro/wlan/MT7615_EEPROM.bin
[ 23.848106] Load EEPROM Buffer from default BIN.
[ 23.852846] Cal Free IC!!
[ 23.856029] The EEPROM in Flash is wrong, use default
[ 23.861133] NICReadEEPROMParameters: EEPROM 0x52 bb00
[ 23.866903] NICReadEEPROMParameters: EEPROM 0x52 bb00
[ 23.872709] mt7622_pa_lna_set(): read antCtrl = 0, polCtrl = 4, wifiStreams = 44
[ 23.880149] mt7622_tssi_set(): nic_cfg1=20, mode=1
[ 24.468914] br-lan: port 1(eth0) entered forwarding state
[ 27.821297] Country Region from e2p = 0
[ 27.825206] read sub id = 1
[ 27.828032] RcRadioInit(): DbdcMode=0, ConcurrentBand=1
[ 27.833287] RcRadioInit(): pRadioCtrl=ffffffc03bf451d8,Band=0,rfcap=1,channel=1,PhyMode=2 extCha=0xf
[ 27.842442] MtSingleSkuLoadParam: RF_LOCKDOWN Feature OFF !!!
[ 27.882419] MtBfBackOffLoadParam: RF_LOCKDOWN Feature OFF !!!
[ 27.888359] EEPROM Init Done!
[ 27.891357] mt_mac_init()-->
[ 27.894259] mt7622_init_mac_cr(): TMAC_TRCR0=0x82783c8c
[ 27.899508] <--mt_mac_init()
[ 27.920991] CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
[ 27.938055] CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
[ 27.955120] CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
[ 27.961653] MAC Init Done!
[ 27.964367] MT7622BBPInit() todo
[ 27.967610] PHY Init Done!
[ 27.970977] MtCmdSetMacTxRx:(ret = 0)
[ 27.974816] WifiFwdSet::disabled=0
[ 27.978267] ap_ftkd> Initialize FT KDP Module...
[ 27.982929] Main bssid = 00:00:00:00:00:00
[ 27.987287] MtCmdSetMacTxRx:(ret = 0)
[ 27.998330] MtCmdSetMacTxRx:(ret = 0)
[ 28.002041] <==== mt_wifi_init, Status=0
[ 28.005990] TxBfModuleEnCtrl:It's not DBDC mode
[ 28.010586] MtCmdEDCCACtrl: BandIdx: 0, EDCCACtrl: 1
[ 28.015613] MtCmdEDCCACtrl: BandIdx: 1, EDCCACtrl: 1
[ 28.020722] The new WDS interface MAC = 00:00:00:00:00:00, MacTabMatchWCID = 0
[ 28.028555] The new WDS interface MAC = 00:00:00:00:00:00, MacTabMatchWCID = 0
[ 28.036648] The new WDS interface MAC = 00:00:00:00:00:00, MacTabMatchWCID = 0
[ 28.044671] The new WDS interface MAC = 00:00:00:00:00:00, MacTabMatchWCID = 0
[ 28.052668] Total allocated 4 WDS interfaces!
[ 28.057859] WtcSetMaxStaNum: BssidNum:1, MaxStaNum:124 (WdsNum:4, ApcliNum:2, MaxNumChipRept:16), MinMcastWcid:125
[ 28.096032] RedInit: set Driver/N9 RED Enable to 1.
[ 28.101127] RedInit: RED Initiailize Done.
[ 28.105353] cp_support_is_enabled: set Driver CP_SUPPORT to Mode 2.
[ 28.111834] Number of Packet Allocated in open = 0
[ 28.116902] Number of Packet Freed in open = 0
[ 28.121517] RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP
[ 28.127987] ap_inf_open --->
[ 28.131156] wifi_sys_open(), wdev idx = 0
[ 28.135385] wdev_attr_update(): wdevId0 = 00:0c:43:26:60:60
[ 28.141455] [RadarStateCheck] RD_NORMAL_MODE
[ 28.147139] MtCmdChannelSwitch: control_chl = 6,control_ch2=0, central_chl = 8 DBDCIdx= 0, Band= 0
[ 28.156297] BW = 1,TXStream = 4, RXStream = 4, scan(0)
[ 28.207010] [DfsCacNormalStart] Normal start. Enable MAC TX
[ 28.283719] Caller: wlan_operate_init+0xe8/0x118 [mt_wifi]
[ 28.289436] phy_mode=14, ch=6, wdev_type=1
[ 28.293838] ht_cap->HtCapInfo: ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=0
[ 28.303368] ht_cap->HtCapParm: mdpu_density=5, ampdu_factor=3
[ 28.312110] AP inf up for ra_0(func_idx) OmacIdx=0
[ 28.319697] mtd_isr::DriverOwn = TRUE
[ 28.320511] AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn
[ 28.328362] ApAutoChannelAtBootUp----------------->
[ 28.333428] ApAutoChannelAtBootUp: AutoChannelBootup = 0
[ 28.338835] ApAutoChannelAtBootUp<-----------------
[ 28.343799] ap_run_at_boot() : ACS is disable !!
[ 28.349294] [PMF]APPMFInit:: Security is not WPA2/WPA2PSK AES
[ 28.355140] [PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0
[ 28.361067] wifi_sys_linkup(), wdev idx = 0
[ 28.365342] wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:127 for WDEV_TYPE:1
[ 28.365342] LinkToOmacIdx = 0, LinkToWdevType = 1
[ 28.378529] bssUpdateBmcMngRate (BSS_INFO_BROADCAST_INFO), CmdBssInfoBmcRate.u2BcTransmit= 0, CmdBssInfoBmcRate.u2McTransmit = 0
[ 28.436137] UpdateBeaconHandler, BCN_UPDATE_INIT, OmacIdx = 0
[ 28.442108] APStartUpForMbss: BssIndex = 0 channel = 6
[ 28.447688] MtCmdTxPowerDropCtrl: ucPowerDrop: 100, BandIdx: 0
[ 28.454351] TxCCKStreamCtrl: set wrong parameters
[ 28.462075] Enable 20/40 BSSCoex Channel Scan(BssCoex=1)
[ 28.540505] MtCmdSetMacTxRx:(ret = 0)
[ 28.544260] MtCmdChannelSwitch: control_chl = 3,control_ch2=0, central_chl = 3 DBDCIdx= 0, Band= 0
[ 28.553898] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 28.599064] AP OBSS SYNC - BBP R4 to 20MHz.l
[ 28.928964] MtCmdChannelSwitch: control_chl = 4,control_ch2=0, central_chl = 4 DBDCIdx= 0, Band= 0
[ 28.937986] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 28.971455] AP OBSS SYNC - BBP R4 to 20MHz.l
[ 29.277018] MtCmdChannelSwitch: control_chl = 5,control_ch2=0, central_chl = 5 DBDCIdx= 0, Band= 0
[ 29.286047] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 29.319257] AP OBSS SYNC - BBP R4 to 20MHz.l
[ 29.672943] MtCmdChannelSwitch: control_chl = 6,control_ch2=0, central_chl = 6 DBDCIdx= 0, Band= 0
[ 29.681989] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 29.717842] AP OBSS SYNC - BBP R4 to 20MHz.l
[ 30.032947] MtCmdChannelSwitch: control_chl = 7,control_ch2=0, central_chl = 7 DBDCIdx= 0, Band= 0
[ 30.042186] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 30.075650] AP OBSS SYNC - BBP R4 to 20MHz.l
[ 30.388946] MtCmdChannelSwitch: control_chl = 8,control_ch2=0, central_chl = 8 DBDCIdx= 0, Band= 0
[ 30.400084] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 30.436710] AP OBSS SYNC - BBP R4 to 20MHz.l
[ 30.740926] MtCmdChannelSwitch: control_chl = 9,control_ch2=0, central_chl = 9 DBDCIdx= 0, Band= 0
[ 30.749909] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 30.767190] AP OBSS SYNC - BBP R4 to 20MHz.l
[ 31.068925] MtCmdChannelSwitch: control_chl = 10,control_ch2=0, central_chl = 10 DBDCIdx= 0, Band= 0
[ 31.078082] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 31.095344] AP OBSS SYNC - BBP R4 to 20MHz.l
[ 31.396912] MtCmdChannelSwitch: control_chl = 11,control_ch2=0, central_chl = 11 DBDCIdx= 0, Band= 0
[ 31.406240] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 31.423494] AP OBSS SYNC - BBP R4 to 20MHz.l
[ 31.724920] MtCmdChannelSwitch: control_chl = 12,control_ch2=0, central_chl = 12 DBDCIdx= 0, Band= 0
[ 31.734073] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 31.751368] AP OBSS SYNC - BBP R4 to 20MHz.l
[ 32.052913] MtCmdChannelSwitch: control_chl = 13,control_ch2=0, central_chl = 13 DBDCIdx= 0, Band= 0
[ 32.062066] BW = 0,TXStream = 4, RXStream = 4, scan(1)
[ 32.079339] AP OBSS SYNC - BBP R4 to 20MHz.l
[ 32.380903] Channel[Idx=2, Ch=3].bEffectedChannel=0x0!
[ 32.386063] Channel[Idx=3, Ch=4].bEffectedChannel=0x0!
[ 32.391213] Channel[Idx=4, Ch=5].bEffectedChannel=0x0!
[ 32.396360] Channel[Idx=5, Ch=6].bEffectedChannel=0x0!
[ 32.401508] Channel[Idx=6, Ch=7].bEffectedChannel=0x0!
[ 32.406824] Channel[Idx=7, Ch=8].bEffectedChannel=0x1!
[ 32.411975] needFallBack=TRUE due to OS!
[ 32.415909] Channel[Idx=8, Ch=9].bEffectedChannel=0x0!
[ 32.421055] Channel[Idx=9, Ch=10].bEffectedChannel=0x0!
[ 32.426292] Channel[Idx=10, Ch=11].bEffectedChannel=0x0!
[ 32.431612] Channel[Idx=11, Ch=12].bEffectedChannel=0x2!
[ 32.436933] needFallBack=TRUE due to OP/OT!
[ 32.441123] Channel[Idx=12, Ch=13].bEffectedChannel=0x0!
[ 32.446464] MtCmdChannelSwitch: control_chl = 6,control_ch2=0, central_chl = 8 DBDCIdx= 0, Band= 0
[ 32.455429] BW = 1,TXStream = 4, RXStream = 4, scan(0)
[ 32.488566] [DfsCacNormalStart] Normal start. Enable MAC TX
[ 32.564991] [DfsCacNormalStart] Normal start. Enable MAC TX
[ 32.574305] apidx 0 for WscUUIDInit
[ 32.577835] Generate UUID for apidx(0)
[ 32.581631] ap_inf_open <---
[ 32.584541] mtk_ppe_dev_register_hook : ineterface ra0 register (1)
[ 32.611599] device ra0 entered promiscuous mode
[ 32.616297] br-lan: port 2(ra0) entered forwarding state
[ 32.621639] br-lan: port 2(ra0) entered forwarding state
[ 32.753730] Device Instance
[ 32.756588] WDEV 00:, Name:ra0, Wdev(list) Idx:0
[ 32.761378] Idx:7
[ 32.763612] mtk_ppe_dev_register_hook : ra0 has been registered in wifi_hook_if table[1]
[ 32.771881]
[ 32.773411]
[ 32.774916]
[ 32.776418]
[ 32.777946]
[ 32.779451]
[ 32.780962]
[ 32.782472]
[ 32.783968]
[ 32.785480]
[ 32.786976]
[ 32.788469]
[ 32.789974]
[ 32.791467]
[ 32.792970]
[ 32.794463]
[ 34.624891] br-lan: port 2(ra0) entered forwarding state
[ 38.508633] jffs2: notice: (2306) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 39.287031] S60samba (4143): drop_caches: 3
[ 40.272094] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 40.279062] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 40.285733] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[ 41.593965] jffs2: notice: (4264) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
BusyBox v1.25.1 () built-in shell (ash)
_________
/ /\ _ ___ ___ ___
/ LE / \ | | | __| \| __|
/ DE / \ | |__| _|| |) | _|
/________/ LE \ |____|___|___/|___| lede-project.org
\ \ DE /
\ LE \ / -----------------------------------------------------------
\ DE \ / Reboot (17.01-SNAPSHOT, r0-aec93540)
\________\/ -----------------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------thank you,seems this part is from wifi-driver…does anyone know from which source the singleimage was created?
@rainfall83 where did you get the wifi-driver and firmware?
It’s seem the mediatek mt7622 driver only support 4.4 kernel, not support 4.19 kernel.
We need the source of the driver…you cannot just copy ko-file from one kernel to another
Yes, I know that, the mediatek driver is not opensource, need contact mediatek to sign the DNA to get the code, and they only support 4.4 kernel.
Not again such closed source thing…
@jackzeng wrote here that wifi and bluetooth driver will be added to 4.19 repo (before make it public). But jack was not online 2 months now and no response to my question in that thread…
@sinovoip @moore @Ryder.Lee which state is the mt7622 wifi-driver? is it NDA or similar? is there any driver available for any kernel-version?
is jack still in bpi-team? i wonder why he is away so long…
mt7622 WiFi driver development is WIP
thank you, the new driver will be opensource? i wonder why a driver exists for openwrt that sounds like NDA…
is there any ETA?
seems there is now a driver available: [BPI-R64] mt7622 mac80211 WiFi driver
Really? I will try that, Thanks.